Study on the Influence of Structural Dimensions on Plate Deflection Under Confined Blast
Source abstract
Abstract
The damage assessment of structures subjected to confined internal blast remains a focal point in the field of explosion. However, current research results are mostly limited to the situation where the cabin structure dimensions remain constant, and the influence of cabin structure dimensions on damage effect under internal blast has not been systematically considered. In order to study the influence of structural dimensions on deformation and deflection of plate under confined blast loadings, LS-DYNA R11.1 finite element simulation software was used, based on a fluid–structure interaction (FSI) algorithm, to carry out simulation research on blast under different cabin structure parameters. The propagation law of blast shock waves under different cabin structure parameters was analyzed, and the deformation and deflection of the plate at the end of the cabin under different explosion equivalent and explosion point positions were studied. The results indicate that when the mass of the explosive remains constant, the location of the explosion point and the structural parameters of the cabin are the main factors affecting the deformation and deflection of the plate. When the distance between the explosion point and the proximal plate is the same and the aspect ratio is 2, the deflection of the proximal plate is smaller than that of the distal plate. When the aspect ratio is 3, as the distance between the explosion point and the proximal plate increases, the deflection of the proximal plate gradually increases, while the deflection of the distal plate first decreases and then increases. When the aspect ratio is 4, 5, and 6, as the distance between the explosion point and the proximal plate increases, the deflection of the proximal plate first increases and then decreases, and the deflection of the distal target plate first decreases and then increases. The research results can provide some reference for the damage assessment of internal blast in structures and the design of structural protection.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Cellular and Composite Structures · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China
Chongqing Changjiang Electrical Appliances Industries Group Co., Ltd., Chongqing 404100, China
Funding
National Natural Science Foundation of China
References (35)
Show source-provided references
1. A review on internal blast damage effects of multi-box type structures
2. Effective Impulse for Fully Clamped Rectangular Plates Under Internal Blast Loading10.1007/s10338-021-00290-4 ↗
3. The scaling laws of cabin structures subjected to internal blast loading: Experimental and numerical studies10.1016/j.dt.2021.04.001 ↗
4. Deformation and rupture of blast loaded square plates—Predictions and experiments10.1016/0734-743X(93)90097-Q ↗
5. Experimental and numerical studies on the dynamic response of stiffened plates under confined blast loads10.1016/j.tws.2020.106839 ↗
6. Dynamic response of steel cabin structure under blast loading from adjacent cabin10.1016/j.engstruct.2024.118213 ↗
7. Comparative analysis of blast load transfer and structural damage in multi-cabin structures during air and underwater explosions10.1016/j.oceaneng.2024.116953 ↗
8. Coupling damage effects of simultaneous underwater explosions of double charge on multi-cabin structures10.1016/j.tws.2024.112757 ↗
9. Cumulative damage effects of repeated underwater explosions on multi-cabin structures10.1016/j.tws.2024.112231 ↗
10. Ship structure steel plate failure under near-field air-blast loading: Numerical simulations vs experiment10.1016/j.ijimpeng.2013.06.009 ↗
11. Large inelastic response of polyurea-coated steel plates to confined blast loading10.1016/j.tws.2022.110454 ↗
12. Dynamic responses of ultralight all-metallic honeycomb sandwich panels under fully confined blast loading10.1016/j.compstruct.2023.116791 ↗
13. Implications of fine water mist environment on the post-detonation processes of a PE4 explosive charge in a semi-confined blast chamber10.1016/j.dt.2018.05.005 ↗
14. Pressure load characteristics of nonideal explosives in a simulation cabin10.1155/2019/6862134 ↗
15. Simplified Algorithm Model for Explosion Shockwave Load in the Cabin10.1155/2021/7726779 ↗
16. Li, X.D., Chen, H.J., Yin, J.P., and Wang, Z.J. (2022). Corner Convergence Effect of Enclosed Blast Shock Wave and High-Pressure Range. Appl. Sci., 12.10.3390/app122211341 ↗
17. Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation10.1016/j.marstruc.2021.102957 ↗
18. Investigation on similarity laws of cabin structure for the material distortion correction under internal blast loading10.1016/j.tws.2022.109371 ↗
19. Experiment and numerical study on dynamic response of liquid cab in under internal blast loading10.1016/j.tws.2019.106405 ↗
20. An experimental study of the effects of degrees of confinement on the response of square mild steel plates subjected to blast loading10.1016/j.ijimpeng.2014.08.002 ↗
21. Experimental and numerical investigation on the dynamic response of steel chamber under internal blast10.1016/j.engstruct.2018.03.067 ↗
22. The elastic-plastic dynamic response of stiffened plates under confined blast load10.1016/j.ijimpeng.2016.05.008 ↗
23. Influence of standoff distance on the deformation of square steel plates subjected to internal blast loadings10.1016/j.tws.2021.107914 ↗
24. Impulse saturation in metal plates under confined blasts10.1016/j.ijimpeng.2022.104308 ↗
25. The effect of stand-off distance on damage to clamped square steel plates under enclosed explosion10.1016/j.istruc.2020.03.066 ↗
26. Experimental and numerical studies on the failure modes of steel cabin structure subjected to internal blast loading10.1016/j.ijimpeng.2017.03.006 ↗
27. Fast prediction method of failure modes for steel box structures under internal blast loading10.1016/j.engfailanal.2020.104919 ↗
28. The Effect of TNT Mass and Standoff Distance on the Response of Fully Clamped Circular Aluminum Plates to Confined Air-Blast Loading10.1016/j.ijimpeng.2022.104357 ↗
29. Deformation Scaling of Circular Plates Subjected to Dynamic Loading10.1016/j.piutam.2012.05.021 ↗
30. Scaling of confined explosion and structural response10.1016/j.tws.2023.110656 ↗
31. Saturated Impulse for Pulse-loaded Rectangular Plates with Various Boundary Conditions10.1016/j.tws.2017.03.030 ↗
32. Simplification of fully confined blasts for structural response analysis10.1016/j.engstruct.2013.05.018 ↗
33. Confined explosions: The effect of compartment geometry10.1016/j.jlp.2017.04.013 ↗
34. TNT equivalency method in confined space based on steel plate deformation10.1016/j.ijimpeng.2023.104587 ↗
35. Dynamic behavior of steel plates subjected to confined blast loading considering afterburning effect10.1016/j.ijimpeng.2024.104934 ↗