journal article·2025-10-05Open access

Experimental and Numerical Investigation of Aerodynamics of Optimum Side-View Mirror Geometries

Onur Yemenici, Merve Vatansever Ensarioğlu

Applied Sciences· Volume 15· Issue 19

Abstract

In this numerical and experimental study, the effects of the width, length, and height parameters of a mirror arm on the drag coefficients of two side-view mirror models were investigated. The analyses were performed according to fractional factorial Taguchi L9 experiment plans. In the wind tunnel, a constant-temperature hot-wire anemometer and a pressure scanner system were used to measure velocity and static pressures, respectively. A realizable k-ε turbulence model with a scalable wall function was applied in the simulations, and the velocity was kept constant at 30 m/s. Means of the drag coefficient, signal/noise values, and analysis of variance were used to evaluate the parameters’ effects. The results showed that the drag coefficients increased with arm height. The increase in arm width decreased the drag coefficient to a limited extent, while the aspect ratio (width/height) showed a strong negative correlation with the drag coefficient. The high aspect ratios resulted in streamlined geometries around the mirror arm and delayed flow separations. The numerical analysis results showed good agreement with the experimental values for both mirror models.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aerodynamics and Fluid Dynamics Research · Wind and Air Flow Studies · Fluid Dynamics and Turbulent Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of Uludag Bursa, TR-16059 Bursa, Turkey

References (24)

Show source-provided references
1. Numerical analysis on the relationship between aerodynamic drag coefficient and 3d molding of rear view mirror
2. Computational and experimental investigation of the unsteady flow structures around automotive outside rear-view mirrors10.1007/s12239-013-0016-0 ↗
3. Numerical simulation of generic side mirror of a car using large eddy simulation with polyhedral meshes10.1002/fld.1719 ↗
4. Alam, F., Jaitlee, R., and Watkins, S. (2007, January 3–7). Aerodynamic effects on an automotive rear side view mirror. Proceedings of the 16th Australasian Fluid Mechanics Conference, Gold Coast, QLD, Australia.
5. Jaitlee, R., Alam, F., and Watkins, S. (2004, January 13–17). Pressure measurements on an automobile side rear view mirror. Proceedings of the 15th Australasian Fluid Mechanics, Sydney, NSW, Australia.
6. A parallel large eddy simulation with unstructured meshes applied to turbulent flow around car side mirror10.1016/j.compfluid.2011.10.017 ↗
7. Computational analysis of an effect of aerodynamic pressure on the side view mirror geometry10.1088/1757-899X/50/1/012039 ↗
8. A numerical investigation of the flow past a generic side mirror and its impact on sound generation10.1115/1.3129122 ↗
9. Kim, J.H., Han, Y.O., and Lim, B.D. (2009, January 19–23). Experimental study of statistical and spectral characteristics of wake flow around the rear view side mirror of a passenger car. Proceedings of the 5th European and African Conference on Wind Engineering, EACWE 5, Florence, Italy.
10. Measurements of aeroacoustic noise and pressure fluctuation generated by a door-mirror model placed on a flat plate10.1299/jee.2.278 ↗
11. Thor, S.W., Chippa, S., and Majage, A. (2015). Dynamic Analysis of Outside Rear View Mirror, SAE International. SAE Technical Papers, 2015-26-0220.10.4271/2015-26-0220 ↗
12. Li, Q., and Yang, Z. (2011, January 10–12). Transient flow over generic rear view mirror using computational fluid dynamics. Proceedings of the IEEE International Conference on Computer Science and Automation Engineering, Shanghai, China.
13. Lin, X., Wang, Y., Chen, Z., Dong, G., and Gu, Z. (2010, January 17–19). The flow and aerodynamic noise calculation of a generic side mirror. Proceedings of the 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, Yiwu, China.
14. An experimental investigation of the flow over an automobile side rear view mirror
15. Parameter optimization and analysis of plastic separator based on EDEM-Fluent10.2507/IJSIMM23-4-701 ↗
16. Aerodynamic analysis of low speed wing design using Taguchi L9 orthogonal array10.1051/matecconf/201815104005 ↗
17. Improvement of the aerodynamic performance of vertical axis wind turbines with leading-edge serrations and helical blades using CFD and Taguchi method10.1016/j.enconman.2018.09.028 ↗
18. Modelling and investigation of a driver seat suspension with negative stiffness structure10.2507/IJSIMM23-2-684 ↗
19. Association, correlation and causation10.1038/nmeth.3587 ↗
20. Surry, D. (1982). Consequences of distortions in the flow including mismatching scales and intensities of turbulence. Wind Tunnel Modelling for Civil Engineering Applications, Cambridge University Press.
21. A new k–ε eddy viscosity model for high Reynolds number turbulent flows10.1016/0045-7930(94)00032-T ↗
22. Describing uncertainties in single sample experiments
23. Induced drag in two dimensions in ideal fluids10.1088/2399-6528/ab5022 ↗
24. Evaluation of aerodynamic noise generation by a generic side mirror