journal article·2025-09-22Open access

Experimental and Numerical Analysis on the Static and Dynamic Performance of Adhesive Bolts in Various Ground Conditions

Tshepiso Mollo, Fhatuwani Sengani, Jeffrey Mahachi

Applied Sciences· Volume 15· Issue 18

Abstract

This study evaluates adhesive bolts (chemical anchors) bonded with epoxy and vinyl ester resins for surface and tunnel excavations in tropical mining environments under static and dynamic loading. Over 300 pull-out tests in concrete and hard rock examined the effects of bolt length, curing time, and substrate condition on load capacity, failure mode, and bond–slip response. Epoxy anchors exhibited higher bond strength, including under early-age and thermally active conditions, while vinyl ester showed improved ductility and post-peak behaviour in fractured rock. Numerical modelling with Rocscience RS2 (Phase 2) and Unwedge simulated excavation responses for bolt lengths of 190–250 mm and spacings of 0.5–2.0 m. Tensile failure dominated at wider spacings, whereas closely spaced anchors enhanced confinement and redistributed stresses. The combined experimental–numerical evidence quantifies chemical-anchor performance in complex subsurface settings and supports their use for early-age support and long-term stability. Findings motivate integration of resin-grouted bolts into modern support designs, particularly in seismically sensitive or hydrothermally variable mines.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Structural Engineering and Vibration Analysis · Vibration and Dynamic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering Science, Faculty of Engineering and the Built Environment, Auckland Park Kingsway Campus, University of Johannesburg, P.O. Box 524, Auckland Park, Johannesburg 2006, South Africa

Fischerwerke GmbH & Co. KG, 72178 Waldachtal, Germany

Upat SA (Pty) Ltd., P.O. Box 53059, Troyeville, Johannesburg 2139, South Africa

Department of Geology and Mining, Physical and Mineral Sciences, University of Limpopo, Private Bag X1106, Sovenga 0727, South Africa

Funding

Fischerwerke GmbH and Co. KG

References (96)

Show source-provided references
1. Coventry, K., Richardson, A., McIntyre, C., and Aresh, B. (2011). Pullout performance of chemical anchor bolts in fibre concrete. Fibre Concrete 2011, Proceedings of the 6th International Conference, Prague, Czech Republic, 8–9 September 2011, Czech Technical University. Available online: https://concrete.fsv.cvut.cz/fcproceedings/pdf/2011/025_o_Short_Coventry_Kathryn.pdf.
2. Du, Y., Li, H., Chicas, S.D., and Huo, L. (2022). Progress and Perspectives of Geotechnical Anchor Bolts on Slope Engineering in China. Front. Environ. Sci., 10.10.3389/fenvs.2022.928064 ↗
3. Performance of chemical anchors and applications in strengthening of RC structural systems
4. Laboratorial Tests and Numerical Modeling of Rock Bolts Bonded by Different Materials10.1007/s00603-022-03191-1 ↗
5. Experimental Investigation of the Anchoring Effect of Two Different Types of Rock Bolts on Fractured Rock10.1155/2019/9290318 ↗
6. Yang, W., Wen, N., Li, S., and Li, X. (2010). Experimental Study on Anchoring Effect of Rock Bolts to Fractured Rock Mass. Deep and Underground Excavations, American Society of Civil Engineers.10.1061/41107(380)38 ↗
7. Stephensson, O. (2021). Instrumentation of rock bolts and cable anchors. Rock Bolting: Theory and Application in Mining and Underground Construction, Proceedings of the International Symposium, Abisko, Sweden, 28 August–2 September 1983, Routledge. [1st ed.].
8. Experimental and Numerical Study on the Anchoring Mechanism of an Anchor Bolt Considering its Lateral Restraint Effect10.1007/s00603-024-03981-9 ↗
9. Experimental study and stress analysis of rock bolt anchorage performance10.1016/j.jrmge.2014.06.002 ↗
10. Experimental and Numerical Study on the Interface Behaviour Between the Rock Bolt and Bond Material10.1007/s00603-018-1629-4 ↗
11. Frenelus, W., Peng, H., and Zhang, J. (2022). An Insight from Rock Bolts and Potential Factors Influencing Their Durability and the Long-Term Stability of Deep Rock Tunnels. Sustainability, 14.10.3390/su141710943 ↗
12. Moore, K.S., and Vlachopoulos, N. (2023). The use of an innovative fiber optic methodology to capture the axial response of rib spacing and grout annulus effects on grouted rock bolts. Expanding Underground—Knowledge and Passion to Make a Positive Impact on the World, CRC Press.10.1201/9781003348030-298 ↗
13. Synthetical deformation analysis of anchor bolt in jointed rock mass
14. State-of-the-art on the anchorage performance of rock bolts subjected to shear load10.1007/s40789-023-00643-z ↗
15. Effects of Hygrothermal Environment on Tensile Capacity of Adhesive-injected Anchor Bolt of ALC Panel and ETICS10.1007/s12205-023-2250-y ↗
16. Shear Resistance of CIP Anchors under Dynamic Loading: Unreinforced Anchor10.7781/kjoss.2014.26.1.011 ↗
17. Mechanical behaviour and failure mechanisms of rock bolts subjected to static-dynamic loads10.1016/j.ijmst.2024.02.007 ↗
18. Theoretical and numerical analysis of a new energy-absorbing rock bolt with controllable constant resistance and large displacement10.1016/j.tust.2020.103581 ↗
19. Mechanical behavior of 2G NPR bolt anchored rock samples under static disturbance loading10.1007/s11629-023-8413-y ↗
20. Performance of D-bolts Under Static Loading10.1007/s00603-011-0198-6 ↗
21. Qiu, P., Wang, W.-W., Wang, K., Zhang, X.-Q., Ning, J.-G., Zhao, C.-L., Jiang, Y.-L., Zheng, J.-D., Cai, T.-T., and Yang, X. (2025). Experimental study on the energy dissipation mechanism of bolted rock under dynamic loading. Sci. Rep., 15.10.1038/s41598-025-02436-7 ↗
22. Factors affecting the strength of chemical anchors
23. Kabantsev, O., and Kovalev, M. (2023). Behavior of Anchors Embedded in Concrete Damaged by the Maximum Considered Earthquake: An Experimental Study. Buildings, 13.10.3390/buildings13112860 ↗
24. Ogawa, R., Etoh, J., Matsunaga, T., Sagisaka, M., and Isobe, Y. (2015, January 17–21). ICONE23-1884 Development of non-destructive inspection technique for adhesive anchor bolts using AE sensor: (2) theoretical approach. Proceedings of the ICONE-23 23rd International Conference on Nuclear Engineering, Chiba, Japan.10.1299/jsmeicone.2015.23._ICONE23-1_419 ↗
25. Miyata, H., Uchida, S., Kimura, T., and Kamada, T. (2015). Non Destructive Evaluation Method for Soundness of Adhesive Portion Around Post Installed Anchor Bolts in Concrete by Electromagnetic Pulse. Third International Conference on Advances in Civil, Structural and Mechanical Engineering—ACSM 2015, Perry Barr, UK, 27 May 2015, Institute of Research Engineers and Doctors.10.15224/978-1-63248-083-5-64 ↗
26. Effects of rock weathering on guided wave propagation in rock bolts10.1016/j.tust.2021.104069 ↗
27. Bolting with pumpable reactive resins—More than fixation of steel dowels in rock10.1002/geot.201800066 ↗
28. Numerical simulation of wave propagation in grouted rock bolts and the effects of mesh density and wave frequency10.1016/j.ijrmms.2005.09.006 ↗
29. Shokri, B.J., Mirzaghorbanali, A., Nourizadeh, H., McDougall, K., Karunasena, W., Aziz, N., Entezam, S., and Entezam, A. (2024). Axial Load Transfer Mechanism in Fully Grouted Rock Bolting System: A Systematic Review. Appl. Sci., 14.10.3390/app14125232 ↗
30. Mechanism of CTC-yield bolts and its experimental research
31. Stephansson, O. (1984). Mechanical rock bolt performance evaluated from pull tests. Rock Bolting: Theory and Application in Mining and Underground Construction, Proceedings of the International Symposium, Abisko, Sweden, 28 August–2 September 1983, Routledge. [1st ed.].
32. Experimental study on reinforced effect of bolts on 3D surface fractured rock under uniaxial tension
33. Dynamic and static analysis of a kind of novel J energy-releasing bolts10.1080/19475705.2020.1833991 ↗
34. Experimental study on the effect of anchored bolts on failure and strength behavior of nonpersistent jointed rock model10.1007/s10064-023-03129-z ↗
35. Sensitivity analysis of parameters for bolts in rock slopes under earthquakes
36. Study on the Mechanical Properties and the Matching of Bolt Components
37. Yang, Z., Zhu, W., Guan, K., Yan, B., Luo, W., and Liang, P. (2022). Experimental and Numerical Study on the Anchorage Effect of Bolted Jointed Rock Masses. Front. Earth Sci., 10.10.3389/feart.2022.861912 ↗
38. Sakhno, I., and Sakhno, S. (2018). Research on a new method for non-adhesive fixing of rockbolts. Nauk. Visnyk Natsionalnoho Hirnychoho Universytetu, 33–39.10.29202/nvngu/2018-6/3 ↗
39. Energy mechanism of bolt supporting effect to fissured rock under static and dynamic loads in deep coal mines10.1016/j.ijmst.2024.03.001 ↗
40. Numerical and analytical simulation of the structural behaviour of fully grouted cable bolts under impulsive loading10.1016/j.ijmst.2018.08.012 ↗
41. Experimental research and modeling of chemical anchor systems under static and dynamic loading10.1088/1757-899X/691/1/012002 ↗
42. A Model for the Mechanics of Jointed Rock10.1061/JSFEAQ.0001133 ↗
43. Boundary integral analysis of piecewise homogeneous media with structural discontinuities10.1016/0148-9062(85)90006-3 ↗
44. Cundall, P.A. (1971, January 4–6). A Computer Model for Simulating Progressive, Large-scale Movement in Blocky Rock System. Proceedings of the International Symposium on Rock Mechanics, Nancy, France. Available online: https://cir.nii.ac.jp/crid/1574231876066779904.bib?lang=en.
45. The Hoek–Brown failure criterion and GSI—2018 edition10.1016/j.jrmge.2018.08.001 ↗
46. Moosavi, M. (1997). Load Distribution Along Fully Grouted Cable Bolts Based on Constitutive Models Obtained from Modified Hoek Cells. [Ph.D. Thesis, National Library of Canada].
47. Moosavi, M., Bawden, W.F., and Hyett, A.J. (1996, January 19–21). A comprehensive laboratory test programme to study the behaviour of modified geometry cable bolt support. Proceedings of the 2nd North American Rock Mechanics Symposium, Montreal, QC, Canada.
48. Load distribution along fully grouted bolts, with emphasis on cable bolt reinforcement10.1002/(SICI)1096-9853(199607)20:7<517::AID-NAG833>3.0.CO;2-L ↗
49. A constitutive law for bond failure of fully-grouted cable bolts using a modified hoek cell10.1016/0148-9062(94)00018-X ↗
50. Stress distribution along a resin grouted rock anchor10.1016/0148-9062(75)90168-0 ↗
51. Guo, P., Phillips, R., and Popescu, R. (2022). Experimental investigation of the effect of rock bolts on tunnel stability in sandy ground. Physical Modelling in Geotechnics, Routledge. [1st ed.].10.1201/9780203743362 ↗
52. Undrained dynamic behaviour of peaty organic soil under long-term cyclic loading, Part I: Experimental investigation10.1016/j.soildyn.2018.01.012 ↗
53. Wyllie, D.C., Engineering, R.S., and Vancouver, E. (2017). Rock Slope Engineering: Civil Applications, CRC Press. [5th ed.].10.4324/9781315154039 ↗
54. Experimental investigation of anisotropic fatigue characteristics of shale under uniaxial cyclic loading10.1016/j.ijrmms.2020.104314 ↗
55. Experimental and Numerical Studies on Bond Quality of Fully Grouted Rockbolt under Confining Pressure and Pull-Out Load
56. Practical considerations in the modelling of resin-grouted rockbolts
57. Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass10.1016/j.conbuildmat.2016.09.100 ↗
58. Wang, S., Wang, L., Tang, F., Ding, K., Li, Z., Ren, B., Jiang, C., and Guo, J. (2023). Experimental Study on the Relationship between the Degree of Surrounding Rock Fragmentation and the Adaptability of Anchor Support. Appl. Sci., 13.10.3390/app132011328 ↗
59. The Reliability-Based Design Optimization of considering Rock-Support Interaction for Rock Tunnels10.1155/2021/9921881 ↗
60. The Effect of Length of Rock Bolts on the Stability of Rock Slopes
61. 3D Numerical Modeling of Rock Mass Failure in an Uplift Test of a Rock Anchor with Focus on the Role of Rock Joints10.1007/s00603-024-04315-5 ↗
62. Full-scale rockbolt testing in the laboratory: Analysis of recent results
63. Investigation into the transfer mechanism of loads in grouted bolts
64. New technology for measuring the in situ performance of rock bolts10.1016/j.ijrmms.2012.07.027 ↗
65. Ko, B.H., Moallemi, S., Dang, H.K., and Yacoub, T. (2024, January 23–26). A Comprehensive Comparison Between Discrete Fracture Network and Generalized Anisotropic Material Behavior for Modeling Jointed Rock Mass. Proceedings of the 58th U.S. Rock Mechanics/Geomechanics Symposium, Colorado, CO, USA.10.56952/ARMA-2024-0085 ↗
66. Chang, Y.-H., Lin, C.-H., and Lin, M.-L. (2020). Influences of Joint Persistence and Groundwater on Wedge Failure Potential of Jointed Rock Slope. EGU General Assembly Conference 2020, Vienna, Austria, 4–8 May 2020, EGU General Assembly.10.5194/egusphere-egu2020-7303 ↗
67. Wedge Failure Analyses of the Jointed Rock Slope Influenced by Foliations10.1007/s10706-020-01320-7 ↗
68. Exploring joint orientation effects on rock wedge stability: Experimental and discrete element analysis10.1016/j.enggeo.2024.107691 ↗
69. The role of joint spacing on the stability analysis of wedge failures10.1088/1755-1315/833/1/012095 ↗
70. Numerical simulation of wedge failure of rock slopes using three-dimensional discontinuous deformation analysis10.1007/s12665-024-11619-w ↗
71. Roof Tunnel Stability by Wedge Analysis10.52547/jeg.14.5.163 ↗
72. Numerical Analysis of Anchor Bolt Pull-out Test by Cohesive Zone Model Combined with Finite Element Method10.1088/1755-1315/570/5/052014 ↗
73. Study of the systematic fully grouted rock bolts performance in tunnels considering installation condition of bolt head10.1080/17486025.2021.1928761 ↗
74. Experimental investigation of surrounding-rock anchoring synergistic component for bolt support in tunnels10.1016/j.tust.2020.103531 ↗
75. Pull-out and Critical Embedment Length of Grouted Rebar Rock Bolts-Mechanisms When Approaching and Reaching the Ultimate Load10.1007/s00603-020-02318-6 ↗
76. Zhang, Z., Liu, Y., Teng, J., Zhang, H., and Chen, X. (2020). An Investigation into Bolt Anchoring Performance during Tunnel Construction in Bedded Rock Mass. Appl. Sci., 10.10.3390/app10072329 ↗
77. Fully Grouted Rock Bolts: An Analytical Investigation10.1007/s00603-014-0610-0 ↗
78. Aziz, N., and Kininmonth, B. (2018, January 7–9). Comparison of the Performance of Resin and Cementitious Grouting Media for Cable Bolts. Proceedings of the 2018 Coal Operators’ Conference, Mining Engineering, Wollongong, Australia. Available online: https://ro.uow.edu.au/articles/conference_contribution/Comparison_of_the_Performance_of_Resin_and_Cementitious_Grouting_Media_for_Cable_Bolts/27687225.
79. Aziz, N., and Kininmonth, B. (2017, January 8–10). A comparison between resin and a cementitious material in the grouting of cable bolts. Proceedings of the 17th Coal Operators’ Conference, Wollongong, Australia. Available online: https://ro.uow.edu.au/articles/conference_contribution/A_comparison_between_resin_and_a_cementitious_material_in_the_grouting_of_cable_bolts/27686961.
80. Potvin, Y., and Brady, B. (2013, January 13–15). Dynamic simulations of excavations with yielding bolts. Proceedings of the Seventh International Symposium on Ground Support in Mining and Underground Construction, Perth, Australia.
81. Simultaneous pattern and size optimisation of rock bolts for underground excavations10.1016/j.compgeo.2015.02.007 ↗
82. Optimization of rock bolt installation spacing using homogenization method10.2208/journalam.6.159 ↗
83. Study on Optimization of Crossheading Support and Lateral Stress Evolution Law with Shallow Buried Soft Rock10.1007/s10706-020-01541-w ↗
84. Liu, Q., Li, Y., Li, W., Zhao, J., Qin, Z., Yang, X., Feng, Q., Jiang, B., Wang, K., and Li, Y. (2022). Primary support optimization of large-span and shallow buried hard rock tunnels based on the active support concept. Sci. Rep., 12.10.1038/s41598-022-11399-y ↗
85. Parametric Study on the Ground Control Effects of Rock Bolt Parameters under Dynamic and Static Coupling Loads10.1155/2020/5247932 ↗
86. Investigating the supporting effect of rock bolts in varying anchoring methods in a tunnel
87. Tang, B., Cheng, H., Tang, Y., Zheng, T., Yao, Z., Wang, C., and Rong, C. (2020). Supporting Design Optimization of Tunnel Boring Machines-Excavated Coal Mine Roadways: A Case Study in Zhangji, China. Processes, 8.10.3390/pr8010046 ↗
88. Experimental Investigation of the Dynamic Impact Failure of Bolted Rock with Different Anchoring Angles10.1002/ese3.2032 ↗
89. Research on Roadway Supporting Effect of Different Bolt Parameters under Blasting Dynamic Load
90. Ground reaction curve for tunnels with jet grouting umbrellas considering jet grouting hardening10.1016/j.ijrmms.2015.03.021 ↗
91. Oraee, B., Zandi, S., and Oraee, K. (2013, January 23–26). A Comparison of Numerical Methods and Analytical Methods in Determination of Tunnel Walls Displacement—A Case Study. Proceedings of the 32nd International Conference on Ground Control in Mining, Morgantown, WV, USA.
92. Godio, A., Oggeri, C., and Seccatore, J. (2025). An Analysis of Rock Bolt Dynamic Responses to Evaluate the Anchoring Degree of Fixation. Appl. Sci., 15.10.3390/app15031513 ↗
93. Experimental investigation of behaviour and failure modes of chemical anchorages bonded to concrete10.1016/j.conbuildmat.2017.08.179 ↗
94. Tian, J., and Hu, L. (2017). Anchorage performance of a high-pressure pre-tightening resin anchor with a compressed grouting body. PLoS ONE, 12.10.1371/journal.pone.0171653 ↗
95. Characterization of mechanical and bonding properties of anchoring resins under elevated temperature10.1016/j.ijrmms.2023.105506 ↗
96. Famiyesin, O.O.R., Rodger, A.A., and Connolly, E.F. (1997). Ground Anchorages and Anchored Structures: Proceedings of the International Conference Organized by the Institution of Civil Engineers and Held in London, UK, on 20–21 March 1997, Thomas Telford. [1st ed.].