Front–Rear Camera Switching Strategy for Indoor Localization in Automated Valet Parking Systems with Extended Kalman Filter and Fiducial Markers

Automated Valet Parking (AVP) systems require high-precision positioning, especially in indoor environments where Global Positioning System (GPS) is unavailable. Existing methods, which use markers installed on parking lot walls or ceilings, often encounter difficulties due to marker detection failures caused by complex parking behaviors, such as infrastructure constraints or perpendicular parking. This study proposes an optimized indoor positioning system for AVP using fiducial markers recognized by front and rear vehicle cameras. To enhance accuracy and robustness, an Extended Kalman Filter (EKF) fuses vehicle kinematic data with marker pose information. Critically, to address the issue of marker occlusion by the front camera during reverse parking, a novel camera switching algorithm employing a hysteresis pattern based on vehicle position, heading, and motion direction is introduced. This ensures continuous marker visibility and stable positioning during parking maneuvers. The system’s effectiveness was validated through simulations and extensive real-vehicle experiments in a real parking space. Results demonstrate that the EKF significantly reduces positioning errors compared to kinematic prediction alone, particularly during curved driving. Furthermore, the proposed camera switching algorithm successfully overcomes the limitations of a front-only camera system, significantly improving positioning accuracy (e.g., reducing RMS error by up to 25.0% in X and 17.6% in Y during parking) and eliminating instability observed with simpler switching logic. This research contributes a cost-effective and reliable positioning solution, advancing the feasibility of AVP systems in challenging indoor environments.