journal article·2025-08-27Open access

The Study on the Relation Between Rock Indentation Crater Morphology and Rock Mechanical Index Based on Indentation Experiments

Zhenkun Wu, Hui Gao, Ying Yang, Songcheng Tan, Xiaohong Fang, Yule Hu, Longchen Duan

Applied Sciences· Volume 15· Issue 17

Abstract

Understanding rock behavior under cutting tools is critical for enhancing cutting processes and forecasting rock behavior in engineering contexts. This study examines the link between mechanical properties and indentation crater morphology of six rocks using a conical indenter until initial fracture. Through indentation testing, mechanical properties (indentation stiffness index k and hardness index HI) were assessed, and crater morphology was analyzed using a 3D laser profilometer. The rocks were categorized into three groups based on specific energy: Class I (slate, shale), Class II (sandstone, marble), and Class III (granite, gneiss). The morphological features of their indentation craters were analyzed both quantitatively and qualitatively. The linear model was used to establish the relationship between crater morphology indices and mechanical properties, with model parameters determined by linear regression. Key findings include: (1) Fracture depth, cross-sectional area, and contour roundness are independent morphological indicators, serving as characteristic parameters for crater morphology, with qualitative and quantitative analyses showing consistency; (2) Post-classification linear fitting revealed statistically significant morphological prediction models, though patterns varied across rock categories due to inherent properties like structure and grain homogeneity; (3) Classification by specific energy revealed distinct mechanical and morphological differences, with significant linear relationships established for all three indicators in Classes II and III, but only roundness showing significance in Class I (non-significant for cross-sectional area and depth). However, all significant models exhibited limited explanatory power (R2 = 0.220–0.635), likely due to constrained sample sizes. Future studies should expand sample sizes to refine these findings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tunneling and Rock Mechanics · Drilling and Well Engineering · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Automation, China University of Geosciences, Wuhan 430074, China

Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems, Wuhan 430074, China

Engineering Research Center of Intelligent Technology for Geo-Exploration, Ministry of Education, Wuhan 430074, China

Faculty of Engineering, China University of Geosciences, Wuhan 430074, China

National Center for International Research on Deep Earth Drilling and Resource Development, Wuhan 430074, China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China

References (35)

Show source-provided references
1. Rock Indentation Characteristics Induced by Spherical Button Subjected to Dynamic and Quasi-Static Loads10.1007/s00603-023-03339-7 ↗
2. Numerical Simulation of the Rock Fragmentation Process Induced by Indenters10.1016/S1365-1609(02)00043-6 ↗
3. Indentation Fracture Development in Rock Continuously Observed with a Scanning Electron Microscope10.1016/0148-9062(84)90794-0 ↗
4. A Spherical Indentation Study on the Mechanical Response of Selected Rocks in the Range from Very Hard to Soft with Particular Interest to Drilling Application10.1007/s00603-020-02242-9 ↗
5. Physical Mechanisms of Hard Rock Fragmentation under Mechanical Loading: A Review10.1016/0148-9062(95)00027-E ↗
6. Comparison and Selection of Index for Macro-Indentation Test of Brittle Rock10.1007/s00603-023-03373-5 ↗
7. Kou, S.Q. (1995). Some Basic Problems in Rock Breakage by Blasting and by Indentation. [Ph.D. Thesis, Luleå University of Technology].
8. A Review of Rock Macro-Indentation: Theories, Experiments, Simulations, and Applications10.1016/j.jrmge.2023.07.022 ↗
9. Bonded-Cluster Simulation of Tool-Rock Interaction Using Advanced Discrete Element Method
10. Experimental Study of the Energy Transfer Efficiency and Rock Fragmentation Characteristics in Percussive Drilling10.1016/j.geothermics.2022.102497 ↗
11. Percussive Drilling: Experimental and Numerical Investigations10.1007/s00603-021-02707-5 ↗
12. A Damage Model for Granite Subjected to Quasi-static Contact Loading10.1002/nag.3303 ↗
13. Fragmentation Characteristics of Rocks under Indentation by a Single Polycrystalline Diamond Compact Cutter10.1115/1.4050340 ↗
14. Quantification of Dynamic Damage and Breakage in Granite under Confined Indentation10.1016/j.ijrmms.2021.104763 ↗
15. Failure Characteristics of Rocks Subjected to PDC Cutter Indentation10.1016/j.petrol.2021.108992 ↗
16. Experimental Investigation on Hard Rock Fragmentation of Inserted Tooth Cutter Using a Newly Designed Indentation Testing Apparatus10.1016/j.ijmst.2022.02.002 ↗
17. Hard Rock Fragmentation in Percussion Drilling Considering Confining Pressure: Insights from an Experimental Study10.1016/j.ijrmms.2021.104961 ↗
18. Murthy, C. (2021). Rock Indentation: Experiments and Analyses, CRC Press.10.1201/9780429019951 ↗
19. Analysis of Fracture Surface Morphology and Study of Seepage Diffusion Characteristics10.1007/s12205-023-0263-1 ↗
20. Description and Classification of Rock Surfaces by Means of Laser Profilometry and Mathematical Morphology10.1016/j.ijrmms.2009.09.004 ↗
21. Multifractal Characterization of Rock Fracture Surfaces10.1016/S0148-9062(98)00172-7 ↗
22. Discing Behavior and Mechanism of Cores Extracted from Songke-2 Well at Depths below 4,500 m10.1016/j.ijrmms.2021.104976 ↗
23. Aldannawy, H.A., Gerbaud, L., and Rouabhi, A. (2021, January 18–25). On the Influence of Tool Shape on Percussive Drilling in Hard Rocks. Proceedings of the 55th U.S. Rock Mechanics/Geomechanics Symposium, Virtual.10.1007/s00603-021-02707-5 ↗
24. Experimental Studies on Rock Failure Mechanisms under Impact Load by Single Polycrystalline Diamond Compact Cutter10.1016/j.petsci.2023.04.008 ↗
25. Fatigue Behaviour Characteristics and Life Prediction of Rock under Low-Cycle Loading10.1016/j.ijmst.2025.03.007 ↗
26. Macro-Micro Failures of Shear Creep and Creep Damage Model of Deep Hard Rocks Induced by Initial Disturbances10.1016/j.engfracmech.2025.111269 ↗
27. Models for Evaluating Craters Morphology, Relation of Indentation Hardness and Uniaxial Compressive Strength via a Flat-End Indenter10.1515/geo-2018-0022 ↗
28. An Experimental Investigation of the Influence of Loading Rate on Rock Tensile Strength and Split Fracture Surface Morphology10.1007/s00603-021-02368-4 ↗
29. Fractal Characteristics of Rocks and Mesoscopic Fractures at Different Loading Rates10.1016/j.gete.2022.100431 ↗
30. Effect of loading rate on tensile strength of rock materials and morphology of fracture joint surface
31. Approach to Characterize Rock Fracture Surface: Insight from Roughness and Fractal Dimension10.1016/j.enggeo.2023.107302 ↗
32. Microstructure Effect on Hard Rock Damage and Fracture During Indentation Process10.1007/s10706-015-9920-6 ↗
33. Experimental Studies of the Resultant Contact Forces in Drillbit–Rock Interaction10.1016/j.ijmecsci.2014.10.007 ↗
34. Application of the DDM and Fracture Mechanics Model on the Simulation of Rock Breakage by Mechanical Tools10.1016/S0013-7952(97)00059-8 ↗
35. The Rock Fragmentation Mechanism and Plastic Energy Dissipation Analysis of Rock Indentation