A Machine Tool for Boring of the Diesel Engine Block Counterbore
Source abstract
Abstract
This paper presents the design and operating principle of a mechanical device for machining a cylinder liner flange seat in a diesel engine damaged due to cavitation or wear. Mounted on the engine block, the device allows the removal of damaged material and the formation of an undercut for the installation of repair rings. The gear ratios used allow for manual driving of the device. The device allows engine repair without the need for disassembly, which provides significant economic benefits by shortening repair time, reducing repair costs, and extending engine life, which is also important for environmental protection.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · Metal Alloys Wear and Properties · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, Aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland
References (17)
Show source-provided references
1. Effect of cylinder-liner rotation on wear rate: An experimental study10.1016/j.heliyon.2019.e02065 ↗
2. Friction and wear of a piston ring/cylinder liner at the top dead centre: Experimental study and modelling10.1016/j.triboint.2016.10.005 ↗
3. Du, C., Sheng, C., Liang, X., Rao, X., and Guo, Z. (2023). Effects of Temperature on the Tribological Properties of Cylinder-Liner Piston Ring Lubricated with Different Oils. Lubricants, 11.10.3390/lubricants11030115 ↗
4. The effect of changes in cylinder liner geometry on the operation of piston compression ring
5. Velugula, R., Ioganathan, B.T., Varadhaiyengar, L., Asvathanarayanan, R., and Mittal, M. (2023). An Analysis of Mechanical and Thermal Stresses, Temperature and Displacement within the Transparent Cylinder and Piston Top of a Small Direct-Injection Spark-Ignition Optical Engine. Energies, 16.10.3390/en16217400 ↗
6. Identyfikacja uszkodzeń tulei cylindrowych okrętowego tłokowego silnika spalinowego w eksploatacji
7. Li, G., Gu, F., Wang, T., You, J., and Ball, A. (2017). Investigation into the Vibrational Responses of Cylinder Liners in an IC Engine Fueled with Biodiesel. Appl. Sci., 7.10.3390/app7070717 ↗
8. Cavitational deterioration of Diesel power plant cylinder liner10.30464/jmee.2020.4.3.239 ↗
9. Research on thermal deformation of cylinder bore with orthogonal experiment method of aluminum alloy cylinder block in diesel engine10.1016/j.applthermaleng.2024.122772 ↗
10. Measurement of cylinder bore deformation during actual operating engines
11. Selmani, E., Delprete, C., and Bisha, A. (2019). Simulation of the Cylinder Bore Distortion and Effect on the Sealing, Springer Nature Applied Sciences.10.1007/s42452-019-0303-0 ↗
12. Stanisław Adamczak, K. (2011). Podstawy Konstruowania Węzłów i Części Maszyn Podręcznik Konstruowania, Wydawnictwo Politechniki Swietokrzyskiej. [5th ed.].
13. Jiang, W. (2019). Analysis and Design of Machine Elements, John Wiley & Sons Singapore Pte. Ltd.
14. The influence of thread screw parameters on the efficiency of threaded joints10.46793/tribomat.2023.005 ↗
15. Determination of specific cutting force components and exponents when applying high feed rates10.1016/j.procir.2018.08.199 ↗
16. Cutting forces during longitudinal turning process of ti-6al-4v eli alloy. Theoretical and experimental values10.30464/jmee.2018.2.3.201 ↗
17. Failure analysis of diesel engine piston in transport utility vehicles10.1016/j.engfailanal.2020.105008 ↗