Parametric Analysis of Static–Dynamic Characteristics of Adjacent Tunnels in Super-Large Twin Tunnels by DEM

The dynamic characteristics of super-large-diameter twin tunnels under train vibration loads have become a critical issue affecting not only the engineering safety of their own tunnels but also adjacent tunnels. A numerical model of super-large-diameter (D = 15.2 m) twin tunnels was established by the discrete element method (DEM) to analyze the static and dynamic responses of adjacent tunnel structures and surroundings under train-induced vibrations. Three parameters were considered: internal walls, absolute and relative spacing, and water pressure. The results indicate that internal walls in super-large twin tunnels can significantly reduce the static and dynamic responses in both the structures and surroundings of the adjacent tunnel. The vehicular lane board (wall2) plays a determinative role, followed by the smoke exhaust board (wall1), while the left and right partition walls (wall3 and wall4) exhibit the least effectiveness. The static–dynamic responses of the liners and surroundings of adjacent tunnels in super-large twin tunnels are significantly greater than those in smaller twin tunnels when the absolute spacing is identical. Moreover, the significant differences in displacement and velocity between the liners and surroundings can lead to cracks, leakage, or even instability. Appropriate water pressure (149 kPa) can effectively mitigate dynamic responses in adjacent tunnel structures and surroundings. The dynamic characteristics of super-large-diameter twin tunnels differ markedly from those of small-diameter twin tunnels, with internal walls, twin tunnel spacing, and water pressure all influencing their static and dynamic behaviors. This study provides theoretical guidance for the design and operation of super-large-diameter twin tunnels.