Interfacial Shear Properties of Red Clay and Polyurethane with Different Densities
Source abstract
Abstract
Polyurethane reinforced slopes have been widely used in practical engineering, for the stability of the composite structure, the interfacial shear performance between polyurethane and soil plays a crucial role. This paper through the indoor interfacial shear test, study the relationship between shear displacement and shear stress at the polyurethane-red clay interface under the different polyurethane densities. At the same time, based on the bilinear finite element cohesive model, using ABAQUS finite element software to establish a numerical model of polyurethane-red clay composite specimens to simulate the indoor shear test process, and to study the shear stress and shear strength changes at the interface between polyurethane and red clay; verify the feasibility of the numerical model by comparative analysis. The test results show: The incorporation of polyurethane has a significant promoting effect on the interfacial shear strength, there is a linear positive correlation between the interfacial shear strength and the density of polyurethane; The shear strengths of the composites with densities of 0.2 g/cm3, 0.5 g/cm3, and 0.8 g/cm3 are 1.53 times, 1.60 times, and 2.24 times that of pure red clay respectively, the optimal polyurethane density is between 0.5 g/cm3–0.8 g/cm3; The bilinear finite element model can effectively simulate indoor shear tests, and the average error of the simulated shear strength result is within 9.4%, which provides an effective method for understanding the interfacial shear performance of the composite body.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Geotechnical Engineering and Soil Stabilization · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Architecture and Transportation Engineering, Guilin University of Electronic Science and Technology, Guilin 541004, China
Funding
Guangxi Key Research and Development Program · National Natural Science Foundation of China
References (49)
Show source-provided references
1. Evolution of Tensile Properties of Compacted Red Clay Under Wet and Dry Cycles10.1007/s12205-021-0527-6 ↗
2. Micro-constructive Damage Model of Dry-Wet Cyclic Red Clay Based on Weibull Distribution10.1520/JTE20230396 ↗
3. Design and construction application of concrete canvas for slope protection10.1016/j.powtec.2018.12.075 ↗
4. Experimental and numerical study on stability performance of new ecological slope protection using bolt-hinge anchored block10.1016/j.ecoleng.2021.106409 ↗
5. Study on bearing capacity characteristics and reinforcement measures of fill foundation in karst mountain area
6. Mechanical Properties and Microstructure of Lime-Treated Red Clay10.1007/s12205-020-0497-0 ↗
7. Performance Evaluation and Modification Mechanism of Red Clay Treated with Lignosulfonate10.1007/s40999-024-00981-2 ↗
8. Vilhena, R.M., Mascarenha, M.M.d.A., Angelim, R.R., Simões, T.d.R., Oliveira, R.B.d., and Luz, M.P.d. (2020). Evaluation of Lime-Treated Lateritic Soil for Reservoir Shoreline Stabilization. Water, 12.10.3390/w12113141 ↗
9. Liu, Z.Y., and Chen, K.S. (2023). Research on Road Characteristics and the Microscopic Mechanism of Lime–Phosphogypsum-Stabilized Red Clay. Appl. Sci., 13.10.3390/app13148057 ↗
10. Improving the Mechanical Properties of Red Clay Using Xanthan Gum Biopolymer10.1155/2021/1535772 ↗
11. Effect of Biopolymeric Stabilization on the Strength and Compressibility Characteristics of Cohesive Soil10.1061/(ASCE)MT.1943-5533.0004068 ↗
12. Geotechnical behavior of high-plastic clays treated with biopolymer: Macro-micro-study10.1007/s12665-023-10760-2 ↗
13. Topsoil reinforcement of sandy slope for preventing erosion using water-based polyurethane soil stabilizer10.1016/j.enggeo.2019.03.003 ↗
14. Fang, H.Y., Su, Y.J., and Du, X.M. (2019). xperimental and Numerical Investigation on Repairing Effect of Polymer Grouting for Settlement of High-Speed Railway Unballasted Track. Appl. Sci. Basel, 9.10.3390/app9214496 ↗
15. Mechanical Characteristic Analysis of Buried Drainage Pipes After Polymer Grouting Trenchless Rehabilitation
16. Experimental and numerical study on polymer grouting pretreatment technology in void and corroded concrete pipes10.1016/j.tust.2021.103842 ↗
17. Research on Mechanical Response of Polymer Grouting Repair for Longitudinal Cracks in Reconstructed and Expanded Expressway Pavement
18. Improving the performance of RET modified asphalt with the addition of polyurethane prepolymer (PUP)10.1016/j.conbuildmat.2019.02.101 ↗
19. Chemical stabilization of calcareous sand by polyurethane foam adhesive10.1016/j.conbuildmat.2021.123609 ↗
20. Interfacial bond performance between self-expansion polymer and concrete10.1016/j.conbuildmat.2020.121459 ↗
21. Study on the failure mechanism between polyurethane grouting material and concrete considering the effect of moisture by digital image correlation10.1016/j.jobe.2023.105948 ↗
22. Research on working performance of waterborne aliphatic polyurethane modified concrete10.1016/j.jobe.2022.104262 ↗
23. The behavior of polymer-bentonite interface under shear stress10.1016/j.conbuildmat.2020.118680 ↗
24. Interfacial Shear Properties of Non-water Reacted Polymer and Geomaterials
25. Experimental study on strength and deformation characteristics of polymers treated sand
26. Experimental study on interfacial shear properties of steel plate, polymer and soil
27. Kim, J., Choi, H., Rye, H.-M., Yoon, K.-B., and Lee, D.-E. (2021). A Study on the Red Clay Binder Stabilized with a Polymer Aqueous Solution. Polymers, 13.10.3390/polym13010054 ↗
28. Performance evaluation and stabilization mechanism of red clay treated with polyurethane10.1016/j.chemosphere.2023.139864 ↗
29. Cyclic stress–strain characteristics of red clay treated with permeable water-soluble polyurethane10.1016/j.trgeo.2023.101072 ↗
30. (2019). Ministry of Housing and Urban-Rural Development (Standard No. GB/T 50123-2019). Standard for Soil Test Method.
31. Mechanical behavior of polymer stabilized sand under different temperatures10.1016/j.conbuildmat.2021.123237 ↗
32. Moisture content, pore-water pressure and wetting front in granite residual soil during collapsing erosion with varying slope angle10.1016/j.geomorph.2020.107210 ↗
33. Red clay composites reinforced with polymeric binders10.1016/j.conbuildmat.2007.10.008 ↗
34. Study on the Brittleness Characteristics of Sand Reinforced with Polypropylene Fiber and Polyurethane Organic Polymer10.1007/s12221-019-8779-1 ↗
35. Utilization of Zeolite to Improve the Behavior of Cement-Stabilized Soil10.1007/s40891-021-00284-9 ↗
36. Shear behavior of a two-component non-water reactive foamed polyurethane (TNFPU) grouting material under different stress levels10.1016/j.conbuildmat.2023.134429 ↗
37. Compressive mechanical properties of self-expanding grouting materials with different densities10.1016/j.conbuildmat.2022.127308 ↗
38. Numerical Analysis on Underground Pipe Settlement and Vacancy Repairing with Polymer Injection
39. The mechanical behaviour of drainage pipeline under traffic load before and after polymer grouting trenchless repairing10.1016/j.tust.2018.01.018 ↗
40. Finite element analysis of polymeric and cementitious materials to secure cracks in concrete10.1016/j.matpr.2021.07.418 ↗
41. Haruna, S.I., Ibrahim, Y.E., Han, Z., and Farouk, A.I.B. (2023). Flexural Response of Concrete Specimen Retrofitted with PU Grout Material: Experimental and Numerical Modeling. Polymers, 15.10.3390/polym15204114 ↗
42. Experimental and numerical study on ballistic resistance of polyurethane-coated thin HPFRC plate10.1016/j.matpr.2023.03.636 ↗
43. Garbowski, T., Pawlak, T.G., and Szymczak-Graczyk, A. (2024). Efficient Load-Bearing Capacity Assessment of a Degraded Concrete Manhole Using Sectional Homogenization. Materials, 17.10.20944/preprints202411.0871.v1 ↗
44. Variable angle shear test and finite element simulation of polyurethane—bentonite composite structure10.1016/j.istruc.2023.01.048 ↗
45. Introduction to partly soil models in ABAQUS Software and their application to the geotechnical engineering
46. Barbero, E.J. (2023). Finite Element Analysis of Composite Materials using Abaqus®, CRC Press.10.1201/9781003108153 ↗
47. On the equilibrium and propagation of cracks in an ainisotropic medium10.1016/0021-8928(61)90098-3 ↗
48. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
49. Artificial neural networks as a tool for selecting the parameters of prototypical under sleeper pads produced from recycled rubber granulate10.1016/j.jclepro.2023.136975 ↗