journal article·2025-05-09Open access

Three-Dimensional Borehole-to-Surface Electromagnetic Resistivity Anisotropic Forward Simulation Based on the Unstructured-Mesh Edge-Based Finite Element Method

Baiwu Chen, Hui Cao, Mingchun Chen, Ruolong Ma, Sihao Wang

Applied Sciences· Volume 15· Issue 10

Abstract

Geophysics is a discipline that studies the properties of subsurface media using physical methods, among which electromagnetic methods have long been an important technical approach in resource exploration. The anisotropy of resistivity in underground media objectively exists in electromagnetic exploration. However, most borehole-to-surface electromagnetic methods (BSEMs) currently process and interpret data based on the assumption of isotropy, which can lead to misinterpretations of observational data in regions where an isotropy is significant. To address this, we propose a 3D edge-based finite element method on unstructured meshes for simulating resistivity anisotropy in BSEMs. A principal-axis anisotropic tensor is introduced to model anisotropy, and the vertical-line transmitter is transformed into an equivalent set of point sources, enabling efficient computation. The accuracy and effectiveness of the proposed numerical algorithm are validated through comparisons with the solutions from Dipole1D and MARE2D. Furthermore, a comparative analysis of reservoir dynamic monitoring under isotropic and anisotropic conditions using the same model reveals that the relative errors in amplitude and phase exceed 40%, and anisotropy must be adequately considered in reservoir monitoring with borehole-to-surface electromagnetic methods. For reservoir models with varying extraction rates, this study further examines the influence of a transmitter’s position on the electromagnetic response characteristics in anisotropic reservoir dynamic monitoring. The results indicate that effective monitoring cannot be achieved when the transmitter is located above the reservoir; however, when the transmitter is positioned below the reservoir, the borehole-to-surface electromagnetic method can significantly enhance the monitoring of reservoir dynamics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical and Geomechanical Engineering · Geophysical Methods and Applications · Geomechanics and Mining Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Geophysics, Chengdu University of Technology, Chengdu 610059, China

Key Laboratory of Earth Exploration and Information Techniques (Chengdu University of Technology), Ministry of Education, Chengdu University of Technology, Chengdu 610059, China

Geomathematics Key Laboratory of Sichuan Province, Chengdu 610059, China

Sinopec Geophysical Corporation, Beijing 100013, China

Yellow River Engineering Consulting Co., Ltd., Zhengzhou 450003, China

Funding

Sichuan Provincial Natural Science Foundation · the National Key Science and Technology Major Project · National Natural Science Foundation of China

References (52)

Show source-provided references
1. 3D borehole-to-surface and surface electromagnetic modeling and inversion in the presence of steel infrastructure10.1190/geo2019-0034.1 ↗
2. He, Z.X. (2006). Research to Borehole-Surface Electromagnetic Technique New Way of Mapping Reservoir Boundary. [Ph.D. Thesis, Chengdu University of Technology].
3. Study of hydrocarbon accumulation by borehole-ground EM method
4. Experimental and field data for the dual-frequency phase-shift method of airborne electromagnetic prospecting10.1190/1.1438921 ↗
5. Some model experiments relating to electromagnetic prospecting with special reference to airborne work10.1111/j.1365-2478.1958.tb01658.x ↗
6. Zhdanov, M.S., Endo, M., Black, N., Spangler, L., Fairweather, S., Hibbs, A., Eiskamp, G., and Will, R. (2013). Electromagnetic monitoring of CO2 sequestration in deep reservoirs. First Break, 31.10.3997/1365-2397.31.2.66662 ↗
7. Controlled-source electromagnetic monitoring of reservoir oil saturation using a novel borehole-to-surface configuration10.1111/1365-2478.12322 ↗
8. High-order Finite Element Forward Modeling Algorithm for Three-dimensional Bore-hole-to-surface Electromagnetic Method using Octree Meshes10.1190/geo2023-0365.1 ↗
9. Chen, Q., Wu, N., Liu, C., Zou, C., Liu, Y., Sun, J., Li, Y., and Hu, G. (2022). Research progress on global marine gas hydrate resistivity logging and electrical property experiments. J. Mar. Sci. Eng., 10.10.3390/jmse10050645 ↗
10. 3D controlled-source electromagnetic modeling in anisotropic medium using edge-based finite element method10.1016/j.cageo.2014.09.008 ↗
11. Guo, H., Li, Y., Gong, S., Lin, L., Duan, Z., and Jia, S. (2024). Three-Dimensional Numerical Simulation of Controlled-Source Electromagnetic Method Based on Third-Type Boundary Condition. Symmetry, 17.10.3390/sym17010025 ↗
12. A parallel finite-element method for three-dimensional controlled-source electromagnetic forward modelling10.1093/gji/ggt027 ↗
13. Fields of a horizontal wire antenna over a layered half-space10.1163/156939396X00379 ↗
14. New advance in three dimension transient electromagnetic inversion10.1111/j.1365-246X.2004.02468.x ↗
15. A parallel goal-oriented adaptive finite element method for 2.5-D electromagnetic modeling10.1111/j.1365-246X.2011.05025.x ↗
16. Forward modeling and inversion of tensor CSAMT in 3D anisotropic media10.1007/s11770-017-0644-7 ↗
17. 3-D resistivity modeling of undulating terrain using space-wavenumber mixed domain approach10.1088/1402-4896/adb357 ↗
18. 3D magnetotelluric modeling using high-order tetrahedral Nédélec elements on massively parallel computing platforms10.1016/j.cageo.2021.105030 ↗
19. Large-scale 3-D EM modelling with a Block Low-Rank multifrontal direct solver10.1093/gji/ggx106 ↗
20. Courant, R. (1943). Variational methods for the solution of problems of equilibrium and vibrations. Finite Element Methods, CRC Press.10.1090/S0002-9904-1943-07818-4 ↗
21. 3D magnetotelluric modelling including surface topography10.1111/j.1365-2478.2007.00614.x ↗
22. Mixed finite elements in R310.1007/BF01396415 ↗
23. Edge elements and what they can do for you10.1109/20.250678 ↗
24. New vector finite elements for three-dimensional magnetic field computation10.1063/1.338584 ↗
25. Comparative performance of novel nodal-to-edge finite elements over conventional nodal element for electromagnetic analysis10.1080/09205071.2022.2117102 ↗
26. Tangential vector finite elements for electromagnetic field computation10.1109/20.104986 ↗
27. 3-D magnetotelluric inversion including topography using deformed hexahedral edge finite elements and direct solvers parallelized on SMP computers–Part I: Forward problem and parameter Jacobians10.1093/gji/ggv410 ↗
28. Three-dimensional finite-element modelling of magnetotelluric data with a divergence correction10.1016/j.jappgeo.2011.09.025 ↗
29. 3-D inversion of magnetotelluric data using unstructured tetrahedral elements: Applicability to data affected by topography10.1093/gji/ggv186 ↗
30. Including geological orientation information into geophysical inversions with unstructured tetrahedral meshes10.1093/gji/ggae186 ↗
31. Joint inversion of potential field data with adaptive unstructured tetrahedral mesh10.1190/geo2023-0280.1 ↗
32. Zhou, J., He, K., Liu, Z., Ruan, S., and Ran, H.-L. (2025). Three-dimensional Finite-Element Forward Modeling and Response Characteristic Analysis of Multifrequency Electromagnetic. Appl. Geophys., 1–13.10.1007/s11770-025-1161-8 ↗
33. A stable finite element solution for two-dimensional magnetotelluric modelling10.1111/j.1365-246X.1987.tb01380.x ↗
34. 2D marine controlled-source electromagnetic modeling: Part 2—The effect of bathymetry10.1190/1.2430647 ↗
35. 3D adaptive forward modeling for time-domain marine CSEM over topographic seafloor
36. 3D CSAMT modeling in anisotropic media using edge-based finite element method10.1080/08123985.2019.1565914 ↗
37. MC-SEM 3D modeling for arbitrarily anisotropic media
38. custEM: Customizable finite-element simulation of complex controlled-source electromagnetic data10.1190/geo2018-0208.1 ↗
39. SimPEG: An open source framework for simulation and gradient based parameter estimation in geophysical applications10.1016/j.cageo.2015.09.015 ↗
40. emg3d: A multigrid solver for 3D electromagnetic diffusion10.21105/joss.01463 ↗
41. Three-dimensional anisotropy modelling and simulation of gas hydrate borehole-to-surface responses10.1016/j.jngse.2022.104738 ↗
42. Three-dimensional wideband electromagnetic modeling on massively parallel computers10.1029/95RS02815 ↗
43. Parallelized 3D CSEM modeling using edge-based finite element with total field formulation and unstructured mesh10.1016/j.cageo.2016.11.009 ↗
44. Zhdanov, M.S. (2009). Geophysical Electromagnetic Theory and Methods, Elsevier.
45. A hybrid fast Hankel transform algorithm for electromagnetic modeling10.1190/1.1442650 ↗
46. mpi4py: Status update after 12 years of development10.1109/MCSE.2021.3083216 ↗
47. Bueler, E. (2020). PETSc for Partial Differential Equations: Numerical Solutions in C and Python, Society for Industrial and Applied Mathematics.10.1137/1.9781611976311 ↗
48. Three-dimensional adaptive higher order finite element simulation for geo-electromagnetics—A marine CSEM example10.1111/j.1365-246X.2011.05127.x ↗
49. Gmsh: A 3-D finite element mesh generator with built-in pre-and post-processing facilities10.1002/nme.2579 ↗
50. Quantifying surface-to-reservoir electromagnetics for waterflood monitoring in a Saudi Arabian carbonate reservoir10.1190/geo2012-0206.1 ↗
51. Passalacqua, H., Davydycheva, S., and Strack, K. (2018, January 10–12). Feasibility of multi-physics reservoir monitoring for Heavy Oil. Proceedings of the SPE International Heavy Oil Conference and Exhibition, Kuwait City, Kuwait.10.2118/193690-MS ↗
52. The petrophysics of electrically anisotropic reservoirs