Interaction of Machining Parameters on MRR of Sintered NdFeB Processed by EDM-Milling
Source abstract
Abstract
Sintered Neodymium–iron–boron (NdFeB) exhibits high hardness and brittleness, resulting in low electrical discharge machining (EDM) efficiency. The study on the interaction effect of parameters on the material removal rate (MRR) of sintered NdFeB processed by EDM-milling is carried out to improve machining efficiency. The interaction significance of parameters on the MRR is analysed based on the interaction curve of two parameters. Meanwhile, the variation of MRR caused by the change in △y(x), △y x, and the sum and product of △y(x) are obtained by calculation. The interaction significance of parameters on MRR is obtained by comparing the sum and product of △y(x), while the significance of each parameter on MRR is obtained by comparing △y(x) and △y x. The reasons for the variation of interaction significance are revealed by analysing the differences in crater diameters and discharge waveforms. It is concluded that different levels of interactions exist between the processing parameters. The interaction between pulse on time and pulse off time affects the MRR most significantly, and current affects the MRR most significantly among single factors. The interaction of parameters can affect processes such as dielectric breakdown, discharge channel expansion, discharge energy and its utilisation, dielectric deionisation, significantly affecting the MRR of sintered NdFeB processed by EDM-milling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China
References (31)
Show source-provided references
1. Study of high-coercivity sintered NdFeB magnets10.1016/j.jmmm.2006.04.029 ↗
2. Investigation of material removal mechanism in EDM of sintered NdFeB permanent magnet
3. Hydrodynamic arc moving mechanism in EDM of polycrystalline diamond10.1080/10426914.2022.2032146 ↗
4. A review on current research trends in electrical discharge machining (EDM)10.1016/j.ijmachtools.2006.08.026 ↗
5. State of the art electrical discharge machining (EDM)10.1016/S0890-6955(03)00162-7 ↗
6. Influence of micro size titanium powder-mixed dielectric medium on surface quality measures in EDM process10.1007/s00170-020-05698-9 ↗
7. Surface integrity after post processing of EDM processed Inconel 718 shaft10.1007/s00170-017-1342-6 ↗
8. Investigation of the spark cycle on material removal rate in wire electrical discharge machining of advanced materials10.1016/j.ijmachtools.2003.10.005 ↗
9. Surface integrity of sintered NdFeB permanent magnet after EDM
10. Corrosion resistance analysis of sintered NdFeB magnets using ultrasonic-aided EDM method10.1007/s11665-014-1298-8 ↗
11. 3-D fabrication using electrical discharge-milling: An overview10.1080/10426914.2022.2072888 ↗
12. Micro-EDM-milling development of new machining technology for micro-machining10.1016/j.procir.2013.03.023 ↗
13. Effect of tool rotation on MRR, TWR, and surface integrity of AISI-D3 steel using the rotary EDM process10.1080/10426914.2016.1140198 ↗
14. An investigation into performance of electric discharge milling using slotted tools10.1007/s12206-020-0528-2 ↗
15. Improving energy utilization efficiency of electrical discharge milling in titanium alloys machining10.1007/s11771-016-3316-5 ↗
16. On sustainable manufacturing titanium alloy by high-speed EDM milling with moving electric arcs while using water-based dielectric10.1016/j.jclepro.2018.04.072 ↗
17. Compound machining of titanium alloy by super high speed EDM milling and arc machining10.1016/j.jmatprotec.2013.10.015 ↗
18. Dry electrical discharge machining of cemented carbide10.1016/j.jmatprotec.2003.10.044 ↗
19. Rotating short arc EDM milling method under composite energy field10.1016/j.jmapro.2021.01.049 ↗
20. Effect of EDM process parameters on 3D surface topography10.1016/S0924-0136(03)00652-6 ↗
21. Investigation of the tool wear rate in tungsten powder-mixed electric discharge machining of AA6061/10% SiCp composite10.1080/10426914.2015.1025965 ↗
22. Determination of optimal parameters with multi response characteristics of EDM by response surface methodology, grey relational analysis and principal component analysis10.1504/IJMTM.2012.051435 ↗
23. Application of a hybrid Taguchi grey approach for determining the optimal parameters on wire electrical discharge machining of Ti6Al4V10.1007/s12008-023-01440-3 ↗
24. Enhancement of material removal rate in magnetic field-assisted micro electric discharge machining of Aluminium Matrix Composites10.1080/01430750.2019.1653979 ↗
25. Ye, L., Saxena, K.K., Qian, J., and Reynaerts, D. (2022). Micro-EDM Drilling/Milling as a Potential Technique for Fabrication of Bespoke Artificial Defects on Bearing Raceways. Micromachines, 13.10.3390/mi13030483 ↗
26. Performance analysis of powder-assisted micro-drilling operation using micro-EDM10.1177/09544062241237423 ↗
27. Statistical analysis on electrode wear in EDM of tool steel DIN 1.2714 used in forging dies10.1016/j.jmatprotec.2006.11.202 ↗
28. Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg 2 Si metal matrix composite—ANFIS and RSM approaches10.1007/s00170-018-3130-3 ↗
29. Black layer affects the thermal conductivity of the surface of copper–tungsten electrode10.1007/s00170-008-1613-3 ↗
30. Influence of workpiece hardness on EDM performance10.1016/j.ijmachtools.2009.03.002 ↗
31. Experimental research on EDM-milling of sintered NdFeB10.1007/s00170-022-09368-w ↗