Selective Alkali Activation of Limestone for Additive Manufacturing in Construction: Influence of Alkali Concentration on Physical and Mechanical Properties
Source abstract
Abstract
Alkali-activated binders are gaining importance in the construction industry because of their environmental and mechanical advantages. This paper focuses on selective limestone activation (SLA) using aqueous sodium hydroxide solutions to be used as a non-hydraulic binder material. This study investigates the mechanical performance of 3D-printed specimens cured at 45 °C produced with different NaOH concentrations. Varying the NaOH concentration is significant for analyzing its role in optimizing the reactivity and mechanical behavior for additive manufacturing applications. The results show that mechanical strength and physical properties are influenced by the NaOH concentration, with the strength decreasing at higher sodium hydroxide loads. Although porosity and density are consistent in all concentrations, microstructure examination showed non-homogeneous grainy texture.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Advanced Theoretical and Applied Studies in Material Sciences and Geometry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering, University of Trento, 38123 Trento, Italy
Laboratoire de Mécanique et Matériaux du Génie Civil, CY Cergy Paris Université, F-95000 Cergy, France
Funding
French National Research Agency (ANR)
References (29)
Show source-provided references
1. An Overview of Additive Manufacturing (3D Printing) for Microfabrication10.1007/s00542-017-3342-8 ↗
2. Effect of Layer Thickness and Orientation on Mechanical Behavior of Binder Jet Stainless Steel 420 + Bronze Parts10.1016/j.promfg.2015.09.016 ↗
3. Gibson, I., Rosen, D.W., and Stucker, B. (2010). Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer.10.1007/978-1-4419-1120-9 ↗
4. Gibson, I., Rosen, D., and Stucker, B. (2015). Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Springer. [2nd ed.].10.1007/978-1-4939-2113-3 ↗
5. Particle-Bed 3D Printing in Concrete Construction—Possibilities and Challenges10.1016/j.cemconres.2018.05.018 ↗
6. Penetration of Cement Pastes into Sand Packings during 3D Printing: Analytical and Experimental Study10.1617/s11527-018-1148-5 ↗
7. Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing10.1016/j.conbuildmat.2017.02.037 ↗
8. Material Characteristics of Binder Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates10.1016/j.conbuildmat.2019.02.065 ↗
9. Timothy, W., and Flatt, R.J. (2018, January 10–12). Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications. Proceedings of the First RILEM International Conference on Concrete and Digital Fabrication—Digital Concrete 2018, Zurich, Switzerland.
10. Weger, D., Lowke, D., and Gehlen, C. (2016, January 29–31). 3D Printing of Concrete Structures Using the Selective Binding Method—Effect of Concrete Technology on Contour Precision and Compressive Strength. Proceedings of the 11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan.
11. Particle Bed 3D Printing by Selective Cement Activation—Applications, Material and Process Technology10.1016/j.cemconres.2020.106077 ↗
12. Fluid Intrusion in Powder Beds for Selective Cement Activation—An Experimental and Analytical Study10.1016/j.cemconres.2022.106771 ↗
13. Shahid, M., and Sglavo, V.M. (2024). Binder Jetting 3D Printing of Binary Cement—Siliceous Sand Mixture. Materials, 17.10.3390/ma17071514 ↗
14. Salari, F., Bosetti, P., and Sglavo, V.M. (2022). Binder Jetting 3D Printing of Magnesium Oxychloride Cement-Based Materials: Parametric Analysis of Manufacturing Factors. J. Manuf. Mater. Process., 6.10.3390/jmmp6040086 ↗
15. 3D Printing of Geopolymer-Based Concrete for Building Applications10.1108/RPJ-09-2019-0244 ↗
16. Pichat, P. (2006). Fabrication d’ Un Matériau Solide à Partir d’ Un Hydroxyde Alcalin. (WO2006087484A3).
17. The Effects of Limestone Powder Particle Size on the Mechanical Properties and the Life Cycle Assessment of Concrete
18. An Initial Study on Alkali Activated Limestone Binders10.1016/j.cemconres.2019.04.002 ↗
19. Investigation of Novel Waste Glass and Limestone Binders Using Statistical Methods10.1016/j.conbuildmat.2015.02.085 ↗
20. Mechanisms of Alkali-Activation of Limestone: Reaction Kinetics and Influence of Drying Parameters10.1016/j.conbuildmat.2024.137501 ↗
21. (2016). Methods of Testing Cement—Part 1: Determination of Strength (Standard No. EN 196-1:2016). Available online: https://standards.iteh.ai/catalog/standards/cen/37b8816e-4085-4dcc-a642-a383d9bddd6c/en-196-1-2016.
22. (2025, April 14). DIN 53019. Available online: https://www.austrian-standards.at/en/shop/din-53019-1-1980-05~p3018442.
23. Study of a Binder Based on Alkaline Activated Limestone10.1016/j.conbuildmat.2021.125323 ↗
24. Dehydration of Natural Gaylussite (Na2Ca (CO3)(2) Center Dot 5H (2) O) and Pirssonite (Na2Ca (CO3)(2) Center Dot 2H (2) O) as Illustrated by FTIR Spectroscopy
25. Study of Dehydration and Rehydration Processes of Portlandite in Mature and Young Cement Pastes10.1007/s10973-011-2167-4 ↗
26. Crystal Structure of Nyerereite: A Possible Messenger from the Deep Earth10.2138/am-2022-8106 ↗
27. The α-β Transformation of Quartz10.1038/145147a0 ↗
28. Zheng, S., Liu, T., Jiang, G., Fang, C., Qu, B., Gao, P., Li, L., and Feng, Y. (2021). Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT. Appl. Sci., 11.10.3390/app11073063 ↗
29. Bingham, E.C. (1940). Experimental Investigations Upon the Flow of Liquids in Tubes of Very Small Diameter, Lancaster Press Inc.