Division and Sealing Surfaces in Flow Energy Machines: An Analysis of Diverse Flatness Deviation Measurement Techniques
Source abstract
Abstract
This paper presents a comparative analysis of the results obtained from three different measuring machines using tactile measurement techniques. The influence of the number and method of collecting measurement points on the detection of shape errors of the tested object is investigated in particular. The conducted studies using three different devices introduce a new, practical method for acquiring and processing measurement points. In addition, the effectiveness of three methods for measuring flatness deviations is analyzed, focusing on how the selection and number of measurement points can significantly affect the accuracy and efficiency of inspection operations. The aim of this study is to illustrate the influence of coordinate measuring techniques on the precision of determining shape errors, offering insight into optimizing measurement practices to improve accuracy and operational efficiency. The novelty of the study lies in the detailed analysis of the impact of the number of measurement points and measurement methods on the final results. Such a detailed approach is rare in the literature and provides significant insights into the possibility of replacing precise devices with less accurate ones under specific conditions, that is, devices with a higher measurement error, while achieving the required measurement accuracy through a greater number of measured points.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Heat Transfer Mechanisms · Advanced Measurement and Metrology Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, The Jacob of Paradies University, Fryderyka Chopina 52, 66-400 Gorzów Wielkopolski, Poland
Institute of Chemical Sciences, Faculty of Biology and Environmental Sciences, Cardinal Stefan Wyszynski University in Warsaw, 01-815 Warsaw, Poland
Department of Renewable Energy Engineering, West Pomeranian University of Technology in Szczecin, 1 Papieza Pawla VI Street, 71-459 Szczecin, Poland
Institute of Technology and Life Sciences—National Research Institute, Falenty, Al. Hrabska 3, 05-090 Raszyn, Poland
Funding
West Pomeranian University of Technology in Szczecin, Poland
References (25)
Show source-provided references
1. Research on Flatness Measurement of Large-Size Parts Based on 3-D Machine Vision10.1109/TIM.2023.3289530 ↗
2. Investigation of Functional Dependency between the Characteristics of the Machining Process and Flatness Error Measured on a CMM10.2478/msr-2021-0022 ↗
3. Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear10.1016/j.precisioneng.2018.07.001 ↗
4. Chuchala, D., Dobrzyński, M., Pimenov, D.Y., Orlowski, K.A., Krolczyk, G., and Giasin, K. (2021). Surface Roughness Evaluation in Thin EN AW-6086-T6 Alloy Plates after Face Milling Process with Different Strategies. Materials, 14.10.3390/ma14113036 ↗
5. Durakbasa, N.M., and Gencyilmaz, M.G. (2019). Accuracy of Ducts Made with Various Processing Strategies. International Symposium for Production Research, Springer International Publishing.
6. Experimental Investigation and Prediction of Flatness and Surface Roughness During Face Milling Operation of WCB Material10.1016/j.protcy.2016.03.036 ↗
7. Wieczorek, B. (1960). Steam Turbine Technology, State Scientific Publishing Houses.
8. Kraszewski, J. (1987). Alignment of Steam Turbine Sets, ZRE.
9. Bałasz, B., and Stefanowicz, K. (2015). Construction of industrial gas turbines–basic issues. Technical Education for the Labor Market 2014, Scientific Publishing House of the State Higher Vocational School.
10. Jiang, H., Yu, S., Wang, S., Ding, X., and Jiang, A. (2023). Research Status and Development Trend of Cylindrical Gas Film Seals for Aeroengines. Processes, 12.10.3390/pr12010069 ↗
11. (1969). Praca zbiorowa, Collective work, Engineer’s guide. Wydawnictwo Naukowe Poradnik Inżyniera Tom 2, Wydawnictwo Naukowe PWN.
12. Stefanowicz, K., and Włażewski, G. (2016). Modern 3D measurement techniques-the use of a laser scanner and a measuring arm. Education for the Labor Market 2015, Wydawnictwo Akademia im. Jakub from Paradyż.
13. Stefanowicz, K., and Włażewski, G. (2019). A method of using an optical scanner to inspect castings with complex shapes. PRZEMYSŁ 4.0, Scientific Publishing House of the Academy of Jakub of Paradyż in Gorzów Wielkopolski.
14. Editorial for Special Issue: Advances in Portable 3D Measurement10.3390/metrology3040023 ↗
15. Surface form inspection with contact coordinate measurement: A review10.1088/2631-7990/acc76e ↗
16. Geometrical Product Specifications (GPS)—Flatness. Standard No. ISO 12781-1:2011(en). Available online: https://www.iso.org/obp/ui/es/#iso:std:iso:12781:-1:ed-1:v1:en.
17. Geometrical Product Specifications (GPS)-Geometrical Tolerancing Tolerances of Form, Orientation, Location and Run-Out (ISO 1101:2017). Standard No. ISO 1101:2017-05. Available online: https://www.iso.org/standard/66777.html.
18. (2024, November 12). Grant 600 HC1. Available online: https://www.machineseeker.pl/tesa-micro+hite+600/i-16309395.
19. Results of coordinate measuring arms’ accuracy testing10.14313/PAR_223/57 ↗
20. (2005). Coordinate Measurement Technique, Publishing House of the Warsaw University of Technology. [1st ed.].
21. Recommendations for measuring roundness deviation on a coordinate measuring machine (CMM)
22. (2025, March 01). Faro Training, Document Information. Available online: https://www.scribd.com/document/470652250/Faro-Training.
23. Accuracy of contact measuring heads of coordinate measuring machines. Scientific works of the Warsaw University of Technology
24. Advanced coordinate measurements in manufacturing techniques
25. Assessment of flatness error by regression analysis10.1016/j.measurement.2020.108720 ↗