journal article·2025-02-16Open access

Monitoring the Thermal Degradation of Two Spruce Species, (Picea abies L., Picea rubens Sarg.), Cherry (Prunus avium), and Oak (Quercus spp.) Under the Influence of Radiant Heat

Iveta Marková, Jana Jaďuďová, Stanislava Gašpercová, Dušan Bóna

Applied Sciences· Volume 15· Issue 4

Abstract

Wood, in the form of cladding or furniture, is often placed in close proximity to heat radiant sources. This research focused on samples, which are Norway spruce (Picea abies L.), Red spruce (Picea rubens Sarg.), cherry (Prunus avium), and oak (Quercus spp.). The aim of this paper was to observe the effect of the distance of the selected wood samples from the radiant heat source on the process of thermal degradation of wood. Additionally, this research aimed to identify significant effects of wood species and sample distance on this process. A hot-plate device, an electric plate heated according to a temperature–time curve, was used as the initiating source. Samples were placed directly on the plate, as well as at two different distances from the plate (12 and 32 mm). During the experiment, the temperature history on the heat-exposed side of the sample, its mass loss, and the formation of a charred layer were monitored. Additionally, the progression of thermal degradation and related effects (smell, smoldering, and charring layer) were visually observed. The highest level of degradation was observed in the spruce sample placed directly on the plate, which started to smolder after 540 s of exposure to radiant heat at 291.2 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Thermography and Photoacoustic Techniques · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Fire Engineering, Faculty of Security Engineering, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovakia

Funding

Ministry of Education Slovak Republic

References (75)

Show source-provided references
1. Zelinka, S.L., Altgen, M., Emmerich, L., Guigo, N., Keplinger, T., Kymäläinen, M., Thybring, E.E., and Thygesen, L.G. (2022). Review of wood modification and wood functionalization technologies. Forests, 13.10.3390/f13071004 ↗
2. (2024, February 12). Properties of Wood. Vlastnosti Dřeva a Dřevostaveb. Stavba Dřeva—Část 1/2. [Properties of Wood and Wooden Buildings. Wood Construction—Part 1/2]. (In Sczech).
3. Multi-span composite beam10.1088/1757-899X/896/1/012058 ↗
4. Kristak, L., Kubovský, I., and Réh, R. (2021). New challenges in wood and wood-based materials. Polymers, 13.10.3390/polym13152538 ↗
5. Patterns and determinants of wood physical and mechanical properties across major tree species in China10.1007/s11427-015-4847-y ↗
6. Gardiner, B., Barnett, J., Saranpaa, P., and Gril, J. (2014). Effects of reaction wood on the performance of wood and wood-based products. The Biology of Reaction Wood, Springer.10.1007/978-3-642-10814-3 ↗
7. Natural rubber/wood composite foam: Thermal insulation and acoustic isolation materials for construction10.1177/02624893231151364 ↗
8. Ranefjärd, O., Strandberg-de Bruijn, P., and Wadsö, L. (2024). Hygrothermal properties and performance of bio-based insulation materials locally sourced in Sweden. Materials, 17.10.3390/ma17092021 ↗
9. Salonvaara, M., and Desjarlais, A. (2024). Impact of insulation strategies of cross-laminated timber assemblies on energy use, peak demand, and carbon emissions. Buildings, 14.10.3390/buildings14041089 ↗
10. Woods and composites cantilever beam: A comprehensive review of experimental and numerical creep methodologies10.1016/j.jmrt.2020.01.013 ↗
11. Comparison of mechanical properties of the eldest larch wood construction with oak wood and spruce wood10.37763/wr.1336-4561/67.4.612624 ↗
12. Life Cycle Assessment (LCA)-based tools for the eco-design of wooden furniture10.1016/j.jclepro.2021.129249 ↗
13. Challenges in the implementation of lean manufacturing in the wood and furniture industry10.1108/JMTM-01-2021-0029 ↗
14. Suandi, M.E.M., Amlus, M.H., Hemdi, A.R., Abd Rahim, S.Z., Ghazali, M.F., and Rahim, N.L. (2022). A review on sustainability characteristics development for wooden furniture design. Sustainability, 14.10.3390/su14148748 ↗
15. Cone calorimeter studies of wood species
16. Thermal degradation and flammability of cellulosics10.1002/fam.810010106 ↗
17. Thermoanalytical studies of combustion of cellulosics and activity of fire retardants10.1007/BF01908486 ↗
18. Toxic gases from fires10.1126/science.208143 ↗
19. Babrauskas, V., and Krasny, J. (1985). Fire Behavior of Upholstered Furniture (NBS Monograph 173). NIST Interagency/Internal Report (NISTIR), National Institute of Standards and Technology.10.6028/NBS.MONO.173 ↗
20. Babrauskas, V., Lawson, J., Walton, W., and Twilley, W. (1982). Upholstered Furniture Heat Release Rates Measured with a Furniture Calorimeter. NIST Interagency/Internal Report (NISTIR), National Institute of Standards and Technology.10.6028/NBS.IR.82-2604 ↗
21. Contribution to the fire retardant treatment of flax board panels
22. Application df thermal analysis procedures to the study pyrolytic and flammability of some polymers10.1016/0040-6031(85)85043-7 ↗
23. Bučko, J., and Osvald, A. (1998). Rozklad Dreva Teplom A Ohňom [Wood Degradation by Heat and Fire], Technical University in Zvolen. (In Slovak).
24. Thermal degradation of wood and its constituents on smoldering combustion in oxygen atmosphere10.3210/fst.5.55 ↗
25. Thermal degradation and thermooxidation of O-Acetyl-(4-O-methyl-D-glucurono)-D-xylan and related derivatives10.1515/hfsg.1995.49.6.512 ↗
26. Madyaratri, E.W., Ridho, M.R., Iswanto, A.H., Osvaldová, L.M., Lee, S.H., and Antov, P. (2023). Effect of lignin or lignosulfonate addition on the fire resistance of areca (Areca catechu) particleboards bonded with ultra-low-emitting urea-formaldehyde resin. Fire, 6.10.3390/fire6080299 ↗
27. Vavrčík, H. (2017). Anatomická Stavba Dřeva [Anatomical Structure of Wood], Mendel University in Brno. (In Czech).
28. Vplyv striedania mrazu a vysokých teplôt na pevnosť v ťahu lepeného smreka nórskeho (Picea abies (L.) H. Karst.) a smrekovec európsky (Larix decidua Mill.). [Effect of alternation of frost and high temperatures on the tensile strength of glued Norway spruce (Picea abies (L.) H. Karst.) and European larch (Larix decidua Mill.)]
29. Vplyv striedania nižších a vyšších teplôt na ohybové vlastnosti lepeného smreka nórskeho (Picea abies (L.) H. Karst.) a smrekovca európskeho (Larix decidua Mill.) [The effect of alternation of lower and higher temperatures on the bending properties of glued Norway spruce (Picea abies (L.) H. Karst.) and European larch (Larix decidua Mill.)]
30. Vplyv tepelného toku na požiarnotechnické a chemické vlastnosti smrekového dreva (Picea abies L.) [Effect of heat flow on the fire-technical and chemical properties of spruce wood (Picea abies L.)]
31. Impact of thermal loading on selected chemical and morphological properties of spruce ThermoWood
32. Thermophysical properties of beech wood in the range from room Ttmperature to 900 °C10.1007/s10765-023-03319-7 ↗
33. Thermal properties of wood measured by the hot-disk method: Comparison with thermal properties measured by the steady-state method10.1186/s10086-021-01951-1 ↗
34. Harangozó, J., Tureková, I., Marková, I., Hašková, A., and Králik, R. (2024). Study of the influence of heat flow on the time to ignition of spruce and beech wood. Appl. Sci., 14.10.3390/app14104237 ↗
35. (2024, December 09). Fire Statistics in Slovakia. Štatistika Požiarovosti na Slovensku. (In Slovak).
36. Interception process of spruce in the phase of disintegration in the Western Tatras
37. Draft of strategy, adaptation and mitigation measures from the viewpoint of climate change impact on Norway spruce tree in Slovakia
38. Density and height structure of natural regeneration in mountain spruce forest of the Polana (Slovakia)
39. Tudor, E.M., Dettendorfer, A., Kain, G., Barbu, M.C., Réh, R., and Krišťák, Ľ. (2020). Sound-absorption coefficient of bark-based insulation panels. Polymers, 12.10.3390/polym12051012 ↗
40. IMS Tools in selected Slovak paper-pulp and pulp enterprises in the context of CSR
41. Projection of red spruce (Picea rubens Sargent) habitat suitability and distribution in the Southern Appalachian Mountains, USA10.1016/j.ecolmodel.2014.06.005 ↗
42. Evaluating the potential of red spruce (Picea rubens Sarg.) to persist under climate change using historic provenance trials in eastern Canada10.1016/j.foreco.2020.118139 ↗
43. Characteristics of red spruce (Picea rubens Sarg.) encroachment at two central Appalachian heathland study areas
44. Assessing red spruce (Picea rubens Sarg.) restoration potential under current and future predicted climate change in Virginia10.1111/rec.14034 ↗
45. Smoleňák, M. (2024, March 12). Červený Smrek—Najtvrdšia Ihličnatá Drevina [Red Spruce—The Hardest Conifer]. (In Slovak).
46. Bystriansky, S. (2018). Výberkový hospodársky spôsob. [Selective economic method]. Konferencia Sliacke Poobhliadnutie 2018. [Sliač Tour Conference 2018], Sliač, Slovakia, 3–4 October 2018, Technical University in Zvolen. (In Slovak).
47. Biogeografická analýza drevín pri prícestných krížoch v okrese Vranov nad Topľou. [Biogeographic analysis of woody plants at crosses in the district Vranov nad Topľou]
48. Antimicrobial and antioxidant activities of flavonoids isolated from wood of sweet cherry tree (Prunus avium L.)10.1080/02773813.2021.1910712 ↗
49. Evaluation of sweet cherry (Prunus avium L.) cultivars for fruit size by FW_G2a QTL analysis and phenotypic characterization
50. Hrotko, K., Németh-Csigai, K., Magyar, L., and Ficzek, G. (2023). Growth and productivity of sweet cherry varieties on Hungarian clonal Prunus mahaleb (L.) rootstocks. Horticulturae, 9.10.3390/horticulturae9020198 ↗
51. Analysis of modern technologies for growing cherry varieties in temperate climates
52. Aboveground biomass basic Density of hardwoods tree species10.37763/wr.1336-4561/65.6.10011012 ↗
53. Slávik, M. (2022). Využitie introdukovaných drevín v lesoch Slovenska (The use of introduced trees in the forests of Slovakia) [The use of introduced trees in the forests of Slovakia]. Nlc Outputs for Forestry Practice IV, National Forestry Center.
54. Physical and mechanical properties of clear wood from red oak and white oak10.15376/biores.15.3.4960-4971 ↗
55. Mračková, E., Schmidtová, J., Marková, I., Jaďuďová, J., Tureková, I., and Hitka, M. (2022). Fire parameters of spruce (Picea abies Karst. (L.)) dust layer from different wood technologies Slovak case study. Appl. Sci., 12.10.3390/app12020548 ↗
56. Marková, I., Giertlová, Z., Jaďuďová, J., and Tureková, I. (2023). Ignition of hay and straw by radiant heat. Processes, 11.10.20944/preprints202308.1307.v1 ↗
57. Jaďuďová, J., Marková, I., Šťastná, M., and Giertlová, Z. (2023). The evaluation of the fire safety of the digestate as an alternative bedding material. Processes, 11.10.3390/pr11092609 ↗
58. Harušincová, N. (2023). Monitoring of Thermal Degradation of Selected Wood Species. [Master’s Thesis, University of Žilina].
59. Influence of temperature of thermal modification on the fire-technical characteristics of spruce wood10.15376/biores.14.2.3795-3807 ↗
60. Evaluation of selected coniferous and deciduous trees species after radiant heat loading by the method of mass loss
61. Gašpercová, S., Marková, I., Vandlíčková, M., Makovická Osvaldová, L., and Svetlík, J. (2023). Effect of protective coatings on wooden elements exposed to a small ignition initiator. Appl. Sci., 13.10.3390/app13053371 ↗
62. Chemical characterization of cherry (Prunus avium) extract in comparison with commercial mimosa and chestnut tannins10.1007/s00226-022-01401-1 ↗
63. Engozogho Anris, S.P., Bi Athomo, A.B., Safou Tchiama, R., Santiago-Medina, F.J., Cabaret, T., Pizzi, A., and Charrier, B. (2020). The condensed tannins of Okoume (Aucoumea klaineana Pierre): A molecular structure and thermal stability study. Sci. Rep., 10.10.1038/s41598-020-58431-7 ↗
64. Chemical composition and selected physical properties of oak wood (Quercus robur L.) modified by cyclic thermo-mechanical treatment10.15376/biores.13.4.9005-9019 ↗
65. Correlations between oak wood properties
66. Ultrasonic evaluation of time and temperature-dependent orthotropic compression properties of oak wood10.1016/j.jmrt.2020.04.006 ↗
67. Kubovský, I., Kačíková, D., and Kačík, F. (2020). Structural changes of oak wood main components caused by thermal modification. Polymers, 12.10.3390/polym12020485 ↗
68. Thermal characterization of wood of nine European tree thermogravimetry and differential scanning calorimetry in an air atmosphere10.1007/s00107-021-01763-6 ↗
69. Signatures that differentiate thermal degradation and heterogeneous combustion of tobacco products and their respective emissions10.1016/j.jaap.2024.106478 ↗
70. Multi-scale modeling of the degradation of thermally thin wood plates10.1016/j.firesaf.2019.102823 ↗
71. Laboratory Investigation of Sessile Oak Wood Thermal Degradation
72. Fire resistance of thermally modified spruce wood
73. Mitrenga, P., Makovická Osvaldová, L., and Konárik, M. (2024). Effect of spruce wood density on selected fire-technical parameters during thermal loading. Appl. Sci., 14.10.3390/app14010170 ↗
74. Management for red spruce conservation in Québec: The importance of some physiological and ecological characteristics—A review10.5558/tfc83378-3 ↗
75. Char layer of various tree parts from selected coniferous wood10.4028/www.scientific.net/AMR.1001.276 ↗