Modal Analysis and Optimization of Tractor Exhaust System
Source abstract
Abstract
Excessive vibrations in exhaust systems can significantly reduce a vehicle’s lifespan and compromise performance. These vibrations, caused by factors such as engine operation and road conditions, lead to wear and tear. To address this issue, a finite element analysis (FEA) was conducted on a 90-horsepower tractor’s exhaust system. Using ANSYS WB®, a 3D model was created and modal analysis was performed to determine the system’s natural frequencies and mode shapes. Based on the results, geometric modifications were made to the exhaust system, increasing its stiffness and shifting vibration frequencies to higher values. Consequently, vibration levels, noise, and the risk of component failure were significantly reduced. The redesigned exhaust system was successfully implemented in production. This study demonstrates the effectiveness of FEA in analyzing exhaust system vibrations and facilitating design improvements. By extending vehicle lifespan and providing a quieter, more comfortable driving experience, this research offers valuable insights for automotive and mechanical engineers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vehicle Dynamics and Control Systems · Engineering Applied Research · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Machinery and Metal Technologies, Soma Vocational School, Manisa Celal Bayar University, Manisa 45500, Türkiye
Department of Mechanical Engineering, Manisa Celal Bayar University Yunusemre, Manisa 45140, Türkiye
References (31)
Show source-provided references
1. Dynamics of perforated higher order nanobeams subject to moving load using the nonlocal strain gradient theory
2. Prevalence and characteristics of supernumerary teeth in a non-syndromic South Indian pediatric population10.4103/0970-4388.127041 ↗
3. Vibration measure and analysis of crawler-type rice and wheat combine harvester in field harvesting condition
4. Vibration measurement and analysis of tracked-whole feeding rice combine harvester
5. Prediction of the vibration characteristics of half-track tractor considering a three-dimensional dynamic model10.1016/j.biosystemseng.2011.07.013 ↗
6. Intelligent vibration detection and control system of agricultural machinery engine10.1016/j.measurement.2019.05.059 ↗
7. Full Vehicle Vibration and Noise Analysis Based on Substructure Power Flow
8. Chowdhury, M., Islam, M.N., Iqbal, M.Z., Islam, S., Lee, D.H., Kim, D.G., Jun, H.J., and Chung, S.O. (2020). Analysis of overturning and vibration during field operation of a tractor-mounted 4-row radish collector toward ensuring user safety. Machines, 8.10.3390/machines8040077 ↗
9. Gedikli, H., Heyal, Y., Bayraktar, A., and Türker, T. (2009, January 22–26). Bir egzoz sisteminin doğal frekans ve mod şekillerinin deneysel ve sayısal yöntemle belirlenmesi. Proceedings of the XVI Ulusal Mekanik Kongresi, Kayseri, Türkiye.
10. Dynamic characterisation of vehicle structural panels10.1504/IJVNV.2016.075148 ↗
11. Measurement and evaluation of whole body vibration of agricultural tractor operator
12. Martínez-Aires, M.D., Quirós-Priego, J., and López-Alonso, M. (2019). Analysing worker exposure to WBV at the doñana biological reserve (Spain). A case study. Advances in Safety Management and Human Factors, Springer. Advances in Intelligent Systems and Computing.10.1007/978-3-319-94589-7_25 ↗
13. Mollenhauer, K., and Tschöke, H. (2010). Intake and exhaust systems. Handbook of Diesel Engines, Springer.10.1007/978-3-540-89083-6 ↗
14. Nefske, D.J., Sung, S.H., and Feldmaier, D.A. (2003). Correlation of a Beam-Type Exhaust System Finite-Element Model for Vibration Analysis, SAE International. SAE Technical Papers.10.4271/2003-01-1597 ↗
15. Vehicle modeling with the exhaust system and experimental validation to investigate the exhaust vertical vibration characteristics excited by road surface inputs10.1007/s12239-008-0058-x ↗
16. Updating of an exhaust system model by using test data from ema
17. An Exhaust System Lumped Model—Identification and Simulation
18. Englund, T.L., Wall, J.E., Ahlin, K.A., and Broman, G.I. (2002, January 25–28). Significance of non-linearity and component, Internal Vibrations in an Exhaust System. Proceedings of the 2nd WSEAS International Conference on Simulation, Modelling and Optimization, Skiathos, Greece.
19. Çıplak, A.Y., Bilgin, A.S., and Kullukçu, A. (2022). Egzoz sisteminin nvh karakteristiğinin sonlu elemanlar benzetimi ile çıkartılması. Teknolojik Gelişmeler ve Mühendislik Uygulamaları, Güven Plus Grup A.Ş. Yayınları. Available online: https://www.guvenplus.com.tr/imagesbuyuk/b7f89TEKNO.pdf.
20. Mtu 16V 4000 M90 Brand/Model Diesel Engine Exhaust System Design
21. Analysis and experiment on strength and vibration characteristics of corn stubble plucking mechanism
22. Vibration spectroscopic technique for species identification based on lipid characteristics
23. Experimental modal analysis a simple non-mathematical presentation
24. Optimization of Exhaust System Hangers for Reduction of Vehicle Cabin Vibrations
25. Thomson, W.T. (2018). Theory of Vibration with Applications, CRC Press. [4th ed.].10.1201/9780203718841 ↗
26. Finite Element Modelling and updating of welded joint for dynamic study of exhaust structure10.1088/1757-899X/469/1/012099 ↗
27. An analysis of the vibration characteristics of automotive exhaust systems and optimization of suspension points10.2174/1874155X01408010574 ↗
28. Modal analysis of a connecting rod using ANSYS10.14445/23488360/IJME-V4I4P106 ↗
29. Research on vibration reduction test and frame modal analysis of rice transplanter based on vibration evaluation
30. Fu, Z.F., and He, J. (2001). Modal Analysis, Elsevier.
31. Systematic fea study of vehicle exhaust system hanger location using addofd method10.4028/www.scientific.net/AMM.392.161 ↗