journal article·2025-02-02Open access

Loss Research and Thermal Analysis of BLDC Hollow-Cup Motor Under Reactor Suppression

Jingjuan Du, Yumeng Sun, Jian Zhao, Boran Liu, Yanqing Mi

Applied Sciences· Volume 15· Issue 3

Abstract

In order to avoid overheating of a BLDC permanent magnet (PM) motor at high speeds, this paper focuses on the loss reduction of a 90 W 47,000 r/min BLDC hollow-cup motor. It is proposed to provide an optimizing method for the series reactors and the parameterization of reactors in the motor system. The finite element method (FEM) is used to calculate and analyze the time harmonic of air-gap magnetic flux density, stator core loss, and rotor eddy current loss in two cases: with a series reactor and without a reactor. By parameterizing the inductance value, the optimal resistance value is determined to minimize motor loss. In addition, an electromagnetic–thermal coupling analysis is conducted, and the results show that the temperature distribution of the stator core, winding, and rotor are improved under reactor suppression. Finally, an experimental platform is built to verify the temperature increase and the efficiency of the motor load operation. A clear reference for the research and optimization analysis of motor loss reduction is provided.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electric Motor Design and Analysis · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin 300384, China

Tianjin Internal Combustion Engine Research Institute, Tianjin 300072, China

Funding

National Key Research and Development Program of China

References (22)

Show source-provided references
1. Design and analysis of a novel topology for slotless brushless DC (BLDC) motors with en-hanced torque and efficiency10.1049/elp2.12020 ↗
2. An Analytical Iron Loss Calculation Model of Inverter-Fed Induction Motors Considering Supply and Slot Harmonics10.1109/TIE.2018.2889631 ↗
3. Optimization and Experimental Validation of Amorphous Alloy High-Speed Asynchronous Motor for Simultaneous Reduction on Core and Copper Losses10.1109/ACCESS.2023.3312992 ↗
4. Yoshida, R., Tanaka, M., Masuda, R., Horiuchi, M., Takazawa, K., Sato, M., Mizuno, T., and Nirei, M. (November, January 31). Reduction of Iron Loss in Ultrahigh-Speed Interior Winding Synchronous Motor Using Magnetic Composite Material. Proceedings of the 2021 24th International Conference on Electrical Machines and Systems (ICEMS), Gyeongju, Republic of Korea.10.23919/ICEMS52562.2021.9634410 ↗
5. Reduction of Torque Ripple and Rotor Eddy Current Losses by Closed Slots Design in a High-Speed PMSM for EHA Applications
6. Analysis of Novel Brushless DC Motors Made of Soft Magnetic Composite Core10.1109/TMAG.2011.2176469 ↗
7. Analytical Study on Core Loss Reduction of Segmented Stator Core Motor in Con-sideration of Rolling Direction of Nonoriented Electrical Steel Sheet10.1109/TIA.2021.3091947 ↗
8. Rotor Surface Optimization of Interior Permanent Magnet Synchronous Motors to Reduce Both Rotor Core Loss and Torque Ripples10.1109/TIA.2022.3164418 ↗
9. Magnet Eddy Current Loss Reduction in Permanent Magnet Machines10.1109/TIA.2018.2874350 ↗
10. Reduction of Rotor Harmonic Eddy-Current Loss of High-Speed PM BLDC Motors by Using a Split-Phase Winding Method10.1109/TEC.2019.2898640 ↗
11. Analysis of Copper Loss of Permanent Magnet Synchronous Motor With Formed Transposition Winding10.1109/ACCESS.2021.3094833 ↗
12. The Loss and Efficiency Analysis and Research of Interior Permanent Magnet Synchronous Motors for Traction Applications10.1109/ACCESS.2023.3237214 ↗
13. Bhattacharya, K., Santra, S.B., Chatterjee, D., and Padmanaban, S. (2020, January 2–4). Torque Ripple and Loss Minimization of Trapezoidal Brushless DC Motor Drive by Harmonics Current Excitation Switching Technique. Proceedings of the 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE), Cochin, India.10.1109/PESGRE45664.2020.9070523 ↗
14. Efficiency Improvement of Permanent Magnet BLDC Motors for Electric Vehicles10.48084/etasr.4367 ↗
15. Interturn fault tolerant drive method by limiting copper loss of interior permanent magnet synchronous motor10.1109/TIE.2019.2941146 ↗
16. Minimising power losses and torque ripples of permanent-magnet synchronous motor by parallel execution of a two-stage predictive control system10.1049/iet-pel.2020.0583 ↗
17. Karnavar, P.H., and Jisha, V. (2020, January 17–19). Harmonic Reduction and Power Factor Improvement of BLDC Motor Drive System Using a Selective Harmonic Elimination PWM Based Controller. Proceedings of the 2020 International Conference on Power, Instrumentation, Control and Computing (PICC), Thrissur, India.10.1109/PICC51425.2020.9362432 ↗
18. Loss model based efficiency optimized control of brushless DC motor drive10.1016/j.isatra.2018.10.046 ↗
19. Investigation of PM Loss in Spoke-Type Permanent Magnet Vernier Motors With Different Stator Topologies for In-Wheel Direct Drive10.1109/TIA.2022.3168007 ↗
20. Liu, K., Chen, J., Wang, Y., Qiu, S., Lin, J., and Zhang, C. (2023, January 18–22). Temperature Analysis of the Surface-mounted Permanent Magnet Synchronous Motor. Proceedings of the 2023 IEEE 18th Conference on Industrial Electronics and Applications (ICIEA), Ningbo, China.10.1109/ICIEA58696.2023.10241450 ↗
21. Loss calculation and thermal analysis of ultra-high speed permanent magnet motor10.1016/j.heliyon.2022.e11350 ↗
22. Investigation of PM Eddy Current Losses in Surface-Mounted PM Motors Caused by PWM10.1109/TPEL.2019.2895679 ↗