Show source-provided references
1. (2022). Determination of Thermal Conductivity and Thermal Diffusivity—Part 2: Transient Plane Heat Source (Hot Disc) Method (Standard No. ISO 22007-2).
2. (2021). Standard test method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (Standard No. ASTM C 518-21). Available online: https://www.astm.org/standards/c518/.
3. Gustafsson, S.E. (May, January 27). On the development of the hot strip, hot disc, and pulse hot strip methods for measuring thermal transport properties. Proceedings of the 2014 32nd International Thermal Conductivity Conference, Purdue University, West Lafayette, IN, USA.
4. (2017). Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique (Standard No. ASTM D 5930-17). Available online: https://www.astm.org/d5930-17.html/.
5. Influence of graphene nanoplatelets on the thermal conductivity of heat transfer oils based on the developed hotwire method
10.1088/1402-4896/ad5f26 ↗6. Maqsood, A., and Anis-ur-Rehman, M. (2013, January 24–26). Transient plane source (tps) sensors for simultaneous measurements of thermal conductivity and thermal diffusivity of insulators, fluids and conductors. Proceedings of the 2013 1st International Conference on Sensing for Industry, Control, Communications, & Security Technologies (ICSICCST 2013), Indus University, Karachi, Pakistan.
7. Improved approach for determining thin layer thermal conductivity using the 3ω method. Application to porous Si thermal conductivity in the temperature range 77–300 K
10.1088/1361-6463/aa69fa ↗8. Zhao, J., Shumuye, E.D., and Wang, Z. (2021, January 23–25). Thermal conductivity and shrinkage properties of slag-based cement concretes. Proceedings of the 2021 5th International Conference on Civil Engineering, Architectural and Environmental Engineering, Chengdu, China.
10. Logic operation and all-optical switch characteristics of graphene surface plasmons
10.1364/OE.501242 ↗11. Evaluation of thermally regenerative electrochemical cycle for thermal-to-electrical energy conversion
10.1063/5.0146725 ↗12. Ultrahigh performance passive radiative cooling by hybrid polar dielectric metasurface thermal emitters
10.29026/oea.2024.230194 ↗19. Thermal conductivity of biobased insulation building materials measured by hot disk: Possibilities and recommendation
10.1016/j.jobe.2021.102858 ↗23. Broadband all-fiber optical phase modulator based on photo-thermal effect in a gas-filled hollow-core fiber
10.29026/oea.2023.220085 ↗24. Investigation of a high-performance solar absorber and thermal emitter based on Ti and InAs
10.1039/D4TA05773B ↗25. Soares, V., McCague, C., Pascal, K., Alvar, E.N., and Bahrami, M. (2023, January 8–12). Measuring Thermal Conductivity of Single Thickness Fibrous Gas Diffusion Layers Using Transient Plane Source Method. Proceedings of the 2023 ESC Meeting, Gothenburg, Sweden.
10.1149/MA2023-02371770mtgabs ↗26. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials
10.1063/1.1142087 ↗27. A new method for measuring the thermal conductivity of small insulating samples
10.1063/1.5065562 ↗28. Thermal conductivity, thermal diffusivity, and specific heat of thin samples from transient measurements with hot disk sensors
10.1063/1.1145178 ↗29. Basu, A., Saha, A., Banerjee, S., Roy, P.C., and Kundu, B. (2024). A Review of Artificial Intelligence Methods in Predicting Thermophysical Properties of Nanofluids for Heat Transfer Applications. Energies, 17.
10.3390/en17061351 ↗30. Thermal Interface Materials with High Adhesion and Enhanced Thermal Conductivity via Optimization of Polydimethylsiloxane Networks and Aluminum Fillers
10.1021/acsapm.4c02396 ↗31. Numerical investigation of heat transfer in a helically coiled tube using copper/water nano-fluid under constant heat flux and prediction of the results using perceptron and radial basis function networks
10.1007/s00231-019-02758-z ↗32. Numerical analysis of porous flat plate solar collector under thermal radiation and hybrid nanoparticles using two-phase model
39. Multi-functional metasurface: Ul-tra-wideband/multi-band absorption switching by adjusting guided mode resonance and local surface plasmon resonance effects
10.1088/1572-9494/ad3b8f ↗43. A wide-band solar absorber based on tungsten nano-strip resonator group and graphene for near-ultraviolet to near-infrared region
10.1016/j.diamond.2024.110843 ↗49. Guo, Z., Li, Z., Zhang, J., Guo, K., Shen, F., Zhou, Q., and Zhou, H. (2017). Review of the functions of Archimedes’ spiral metallic nanostructures. Nanomaterials, 7.
10.3390/nano7110405 ↗55. Bejan, A., and Kraus, A.D. (2003). Heat Transfer Handbook, John Wiley & Sons.
60. Hybrid nanostructure with two-dimensional grating for resonance waves self-referenced sensing
10.1063/5.0167370 ↗61. All-optical object identification and three-dimensional reconstruction based on optical computing metasurface
10.29026/oea.2023.230120 ↗63. Brown, K.J., Byrne, G., O’Donovan, T.S., and Murray, D.B. (2012, January 4–7). Effect of thermal boundary condition on heat dissipation due to swirling jet impingement on a heated plate. Proceedings of the 2012 6th European Thermal Sciences Conference, Poitiers, France.
10.1088/1742-6596/395/1/012039 ↗65. A numerical study on the influence of insulating layer of the hot disk sensor on the thermal conductivity measuring accuracy
10.1504/PCFD.2013.053660 ↗