Numerical Simulation of Microwave-Induced Cracking of Coal Containing Pyrite Powder Based on a Multi-Field Coupling Model
Source abstract
Abstract
Microwave irradiation has become a potential technical method for coalbed degassing, which can effectively improve its permeability. A coupled electromagnetic—thermomechanical damage (ETMD) model was established to study the damage characteristics of coal containing pyrites. Under microwave irradiation, the temperature increase rate of pyrite was significantly higher compared to the coal matrix. The coal matrix was cracked by expansion stress in high-temperature spots. In the rotational heating mode, the coal matrix was easier to damage than under the static heating mode. The coal matrix damage efficiency was also related to the position of the sample under the static heating mode. Uniform centripetal pressure could inhibit coal matrix damage. Moreover, the pressure distribution affected the damage paths. Compared to no confining pressure, the percentage of areas damaged in coal was lower under low parallel pressure and higher under high parallel pressure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Environmental and Safety Engineering, Fuzhou University, Fuzhou 350108, China
Funding
Natural Science Foundation of the Fujian Province · National Natural Science Foundation of China
References (48)
Show source-provided references
1. National Bureau of Statistics of China (2023). Statistical Communiqué of the People’s Republic of China on the 2022 National Economic and Social Development.
2. A permeability model for coal based on elastic and plastic deformation conditions under the interaction of hydro-mechanical effects10.1016/j.petrol.2022.110209 ↗
3. Analysis on characteristics and evolution trend of coal mine accidents in our country during “13th five-year” plan period
4. Research progress and development direction of gas control with mine hydraulic technology in China coal mine
5. Fracture variation in high-rank coal induced by hydraulic fracturing using X-ray computer tomography and digital volume correlation10.1016/j.coal.2022.103942 ↗
6. Analysis on the multi-phase flow characterization in cross-measure borehole during coal hydraulic slotting10.1016/j.ijmst.2018.05.006 ↗
7. Mechanism of water inhibiting gas outburst and the field experiment of coal seam infusion promoted by blasting10.1016/j.fuel.2019.04.064 ↗
8. Development and experimental validation of a multiphysics model for 915 MHz microwave tempering of frozen food rotating on a turntable10.1016/j.biosystemseng.2019.02.008 ↗
9. Pore structure and fractal analysis of Ximeng lignite under microwave irradiation10.1016/j.fuel.2015.01.019 ↗
10. Elucidation of the pumping effect during microwave drying of lignite10.1021/acs.iecr.5b04881 ↗
11. Image and ultrasonic analysis-based investigation of coal core fracturing by microwave energy10.1016/j.ijrmms.2020.104232 ↗
12. Experimental study on coal damage subjected to microwave heating10.1007/s00603-020-02230-z ↗
13. Experimental study on the petrophysical variation of different rank coals with microwave treatment10.1016/j.coal.2015.12.010 ↗
14. The effect of microwave radiation on coal grindability10.1016/S0016-2361(99)00285-9 ↗
15. Inducing fractures and increasing cleat apertures in a bituminous coal under isotropic stress via application of microwave energy10.1016/j.coal.2011.07.007 ↗
16. Microwave-aided pyrolysis and fragmentation of tar-rich coal and rocks for in situ coal conversion and clean utilization10.1016/j.ijrmms.2023.105391 ↗
17. The influence of microwave energy delivery method on strength reduction in ore samples10.1016/j.cep.2006.06.009 ↗
18. Quantifying damage around grain boundaries in microwave treated ores10.1016/j.cep.2009.09.001 ↗
19. Bonded-particle modelling of microwave-induced damage in ore particles10.1016/j.mineng.2010.05.019 ↗
20. Heating process and damage evolution of microwave absorption and transparency materials under microwave irradiation10.1007/s40948-021-00284-z ↗
21. Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite10.1016/j.mineng.2016.09.011 ↗
22. 3D numerical study on microwave induced stresses in inhomogeneous hard rocks10.1016/j.mineng.2016.01.001 ↗
23. Particle modeling simulation of thermal effects on ore breakage10.1016/j.commatsci.2008.02.005 ↗
24. Fully-coupled simulations of thermally-induced cracking in pegmatite due to microwave irradiation10.1016/j.jrmge.2018.12.007 ↗
25. Numerical modelling of microwave heating assisted rock fracture10.1007/s00603-021-02685-8 ↗
26. Numerical modelling of microwave irradiated rock fracture10.1016/j.mineng.2023.108318 ↗
27. Microwave-assisted damage and fracturing of hard rocks and its implications for effective mineral resources recovery10.1016/j.mineng.2020.106663 ↗
28. The interaction between microwave and coal: A discussion on the state-of-the-art10.1016/j.fuel.2022.123140 ↗
29. Three-dimensional simulation of microwave heating coal sample with varying parameters10.1016/j.applthermaleng.2015.10.041 ↗
30. Transient power loss density of electromagnetic pulse in Debye media10.1109/TMTT.2014.2374158 ↗
31. Effect of microwaves on Escherichia coli and bacillus subtilis10.1128/am.15.6.1371-1375.1967 ↗
32. Finite element analysis of microwave heating of potato-transient temperature profiles10.1016/S0260-8774(03)00040-2 ↗
33. Coupled Electromagnetic And Heat Transfer Model For Microwave Heating In Domestic Ovens10.1016/j.jfoodeng.2012.03.013 ↗
34. A coupled thermo-hydrologic-mechanical (THM) model to study the impact of hydrate phase transition on reservoir damage10.1016/j.energy.2020.119222 ↗
35. A review of some rock mechanics issues in geothermal reservoir development10.1007/s10706-012-9508-3 ↗
36. Impact of water and nitrogen fracturing fluids on fracturing initiation pressure and flow pattern in anisotropic shale reservoirs10.1016/j.compgeo.2016.07.011 ↗
37. Numerical studies on the failure process of heterogeneous rock material with preexisting fracture under uniaxial compression
38. A mesostructure-based damage model for thermal cracking analysis and application in granite at elevated temperatures10.1007/s00603-014-0679-5 ↗
39. Thermal-mechanical modelling of rock response and damage evolution during excavation in prestressed geothermal deposits10.1016/j.ijrmms.2021.104913 ↗
40. Coupled thermal-hydraulic-mechanical model during rock damage and its preliminary application
41. Numerical modeling on destress blasting in coal seam for enhancing gas drainage10.1016/j.ijrmms.2012.11.004 ↗
42. Microwave heating temperature rise characteristics of composite minerals under the circumferential stirring mode
43. Ma, M. (2023). Transformation Characteristics of Pyriteduring Coal Accumulation, Flotation and Pyrolysis. [Ph.D. Thesis, China University of Mining and Technology].
44. Thermal damage pattern and thresholds of granite10.1007/s12665-015-4234-9 ↗
45. Dual-damage constitutive model to define thermal damage in rock10.1016/j.ijrmms.2019.104185 ↗
46. Study of thermal-mechanical coupling numerical simulation of rock under uniaxial heating
47. Study on the damage and fracture characteristics of coal rock based on the X-ray micro-CT scanning technology and statistical strength theory
48. Dynamic compressive strength and failure mechanisms of microwave damaged sandstone subjected to intermediate loading rate10.1016/S1003-6326(22)66052-7 ↗