Closed Circuit of 3-Dimensional Polymer Powders
Source abstract
Abstract
This article describes the most important stages of testing the levels of innovative readiness of a new machine and material construction solutions for closed loops of polymer powders in 3D additive manufacturing. The aim of this study was to indicate the state and directions of development of the technology of geometric recycling of polymer powders in 3D additive manufacturing, the need to control the geometric quality of the powders, and the quality of the design of machines for their processing in a closed circuit. The method was aimed at creating a strategy and verifying the stages of development of a new idea for stabilizing the geometric and dynamic design features of polymer powders for additive manufacturing (3D printing). Connections and relationships of the variable design features of powders, machines and devices with variable postulated states of products and processes allowed for the analysis, knowledge, description and development of variables for stabilizing geometric features of polymer powders in recycling. The results show the possibilities of supporting innovative creativity according to the adopted method, allow for determining the level of compliance of the quality of the products of the technical system, the effectiveness of preparatory processes for recycling and the non-toxicity of the products and processes of the new technology and their closed loop. The goal of developing useful design values, according to an integrated method of analysis, assessment and environmental development, was achieved, including the proposal of design features of razor blade shredders, supported by genetic algorithms, and devices for stabilizing polymer powders in additive manufacturing with recycling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Bakery Industry Research Plant Ltd. (Zakład Badawczy Przemysłu Piekarskiego Spółka z o.o.), Startowa 2, 85-744 Bydgoszcz, Poland
Department of Renewable Energy Sources Engineering and Technical Systems, Faculty of Mechanical Engineering, Bydgoszcz University of Science and Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
Funding
National Centre for Research and Development
References (36)
Show source-provided references
1. Additive manufacturing research landscape: A literature review10.1017/pds.2021.34 ↗
2. Intelligent Grinding System
3. Bojar, W., Burduk, A., Dostatni, E., Duda, J., Jardzioch, A., Macko, M., Niewiadomski, P., Oleszek, S., Pietrusewicz, K., and Rojek, I. (2023). Przemysł 4.0 w Przedsiębiorstwach z Branży Motoryzacyjnej, Stan Obecny i Perspektywy Rozwoju, Polish Academy of Science. Available online: https://publikacje.pan.pl/book/147336/przemysl-4-0-w-przedsiebiorstwach-z-branzy-motoryzacyjnej-stan-obecny-i-perspektywy-rozwoju.
4. Kowalski, Ł. (2023). Badania Wpływu Zjawisk Cieplnych Zachodzących Podczas Formowania Addytywnego Wyrobów z PET-G na ich Właściwości Wytrzymałościowe, AGH.
5. Sadkiewicz, J. (2013). Prowdrożeniowe Badanie Efektywności Pracy Wielotarczowego Rozdrabniacza Ziaren Zbóż. Rozprawa Doktorska, Rozprawa doktorska, University of Science and Technology in Bydgoszcz.
6. Zimniak, P. (2016). Wpływ Cech Geometrycznych i Ruchowych Walca w Technologii SLS Na Charakterystyki Użytkowe Elementów Termoplastycznych z Napełniaczem Włóknistym. Rozprawa Doktorska, Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy. Available online: https://dlibra.pbs.edu.pl/publication/921.
7. Inteligentne Monitorowanie Jako Skuteczna Metoda Podwyższania Efektywności i Jakości Procesu Rozdrabniania
8. Flizikowski, J., and Bielinski, K. (2012). Technology and Energy Sources Monitoring: Control, Efficiency, and Optimization, IGI Global.10.4018/978-1-4666-2664-5 ↗
9. Kruszelnicka, W. (2023). Zintegrowana Inżynieria Maszyn i Urzadzeń Procesów Rozdrabniania Ziaren Biomasy, Wydawnictwa Uczelniane Politechniki Bydgoskiej.
10. Tomporowski, A. (2018). Rozdrabnianie Alternatywnych Nośników Energii, Wydawnictwa Uczelniane Uniwersytetu Technologiczno-Przyrodniczego w Bydgoszczy.
11. Tyszczuk, K. (2006). Badania Efektywności Rozdrabniania Nasion Lnu, Rozprawa Doktorska, Politechnika Poznańska.
12. Piasecka, I. (2014). Badanie i Ocena Cyklu Życia Zespołów Elektrowni Wiatrowych, Rozprawa Doktorska, Politechnika Poznańska.
13. Macko, M. (2011). Metoda Doboru Rozdrabniaczy Wielokrawędziowych Do Przeróbki Materiałów Polimerowych, Wydawnictwo Uniwersytetu Kazimierza Wielkiego.
14. Dudziak, P. (2017). Badania Zintegrowanej Efektywności Procesu Rozdrabniania Materiałów Uziarnionych Naddźwiękowym Młynem Tarczowym, Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy.
15. Additive Manufacturing of Polymer-Based Structures by Extrusion Technologies10.1093/oxfmat/itaa004 ↗
16. Rashid, A.A., and Koç, M. (2021). Fused Filament Fabrication Process: A Review of Numerical Simulation Techniques. Polymers, 13.10.3390/polym13203534 ↗
17. Harris, M., Potgieter, J., Archer, R., and Arif, K.M. (2019). Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments. Materials, 12.10.3390/ma12101664 ↗
18. Ilyas, R.A., Sapuan, S.M., Harussani, M.M., Hakimi, M.Y.A.Y., Haziq, M.Z.M., Atikah, M.S.N., Asyraf, M.R.M., Ishak, M.R., Razman, M.R., and Nurazzi, N.M. (2021). Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications. Polymers, 13.10.3390/polym13081326 ↗
19. A Multi-Parametric Process Evaluation of the Mechanical Response of PLA in FFF 3D Printing10.1080/10426914.2022.2089895 ↗
20. Sidor, J., and Klich, A. (2018). Współczesne Maszyny Do Rozdrabniania: Kruszarki i Młyny, Instytut Techniki Górniczej KOMAG.
21. Sadkiewicz, J., Sadkiewicz, K., and Flizikowski, J. (2024). Machines and Devices for Innovative Mixing and Seasoning of Polymer Powders for 3D Technology (SLS), ZBPP. Research.
22. PlasticsEurope AISBL (2019). The Circular Economy for Plastics. A European Overview, PlasticsEurope AISBL.
23. Biological Degradation of Plastics: A Comprehensive Review10.1016/j.biotechadv.2007.12.005 ↗
24. Recycled Poly(Lactic Acid)–Based 3D Printed Sustainable Biocomposites: A Comparative Study with Injection Molding
25. Cruz, F., Lanza, S., Boudaoud, H., Hoppe, S., and Camargo, M. (2015, January 10–12). Polymer Recycling and Additive Manufacturing in an Open Source Context: Optimization of Processes and Methods. Proceedings of the 2015 Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference, Austin, TX, USA.
26. Review of Additive Manufacturing Methods10.4028/www.scientific.net/SSP.308.1 ↗
27. Serin, G., Kahya Gürgen, M., Unver, H.O., Durlu, N., Eroğul, O., and Gulec, Y. (2016, January 12–15). A Review of Additive Manufacturing Technologies. Proceedings of the 17th International Conference on Machine Design and Production, Bursa, Turkiye.
28. (2021). Additive Manufacturing-General Principles-Fundamentals and Vocabulary (Standard No. ISO/ASTM 52900:2021).
29. A Comprehensive Review of Global Production and Recycling Methods of Polyolefin (PO) Based Products and Their Post-Recycling Applications
30. (2024, July 02). Einfach Automatisieren. Available online: https://www.schmalz.com/de/karriere-unternehmen/aktuelles/news/fb-automatica-einfach-automatisieren/.
31. Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., and Ayoub, G.Y. (2023). Advancing Plastic Recycling: Challenges and Opportunities in the Integration of 3D Printing and Distributed Recycling for a Circular Economy. Polymers, 15.10.3390/polym15193881 ↗
32. 3D Printing Filament as a Second Life of Waste Plastics—A Review10.1007/s11356-020-10657-8 ↗
33. Mieszalniki MC2-S.r.l. Pewny Partner w Precyzyjnym Mieszaniu Proszków
34. Active Monitoring as Cognitive Control of Grinders Design10.1063/1.4977680 ↗
35. Peszyński, K., Perczyński, D., Smyk, E., and Kolber, P. (2017, January 15–18). Experimental verification of velocity distribution in different cross-sectional ventilation ducts. Proceedings of the 23rd International Conference Engineering Mechanics 2017, Svratka, Czech Republic. Available online: https://www.engmech.cz/improc/2017/0770.pdf.
36. (2006). Particle Size Analysis—Image Analysis Methods—Part 2: Dynamic Image Analysis Methods (Standard No. ISO 13322-2:2006).