journal article·2024-10-11Open access

Determination of Compressed Liquid Densities for CO2 + n-Decane Using a Vibrating Tube Densimeter

Tao Jia, Jinpeng Yang, Jia Yu

Applied Sciences· Volume 14· Issue 20

Abstract

Understanding the density of CO2 + n-decane is crucial for designing and operating CO2 capture, transport, and storage. The safety and effectiveness of CO2 burial is directly affected by the density of CO2 + n-decane mixtures. The liquid densities of CO2(1) + n-decane(2) mixtures with mole fractions of CO2 x1 = 0, 0.2032, 0.4434, 0.7589, and 0.8947 were measured using a vibrating tube densimeter. The combined expanded uncertainties of density with a level of confidence of 0.95 are estimated to be 0.6 kg·m−3. A total of 221 compressed liquid densities of CO2(1) + n-decane(2) mixtures along the five isotherms between T = (283 and 363) K with pressures up to 100 MPa were presented. The densities of mixtures were correlated by the modified Tait equation, resulting in absolute average deviations between the experimental and calculated values of 0.028%, 0.013%, 0.017%, 0.044%, and 0.042%. In addition, the isothermal compressibility, isobaric thermal expansivity, and excess molar volume were derived from the modified Tait equation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Phase Equilibria and Thermodynamics · Carbon Dioxide Capture Technologies · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Engineering Research Center of Building Energy Efficiency Control and Evaluation, Ministry of Education, Hefei 230022, China

College of Electrical, Energy and Power Engineering, Yangzhou University, Yangzhou 225127, China

Key Laboratory of Thermo-Fluid Science and Engineering of MOE, Xi’an Jiaotong University, Xi’an 710049, China

Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China

Funding

Open Project Program of Engineering Research Center of Building Energy Efficiency Control and Evaluation, Ministry of Education · Natural Science Foundation of Jiangsu Province, China · Natural Science Research of the Jiangsu Higher Education Institutions of China · CAS Key Laboratory of Cryogenics, TIPC · Key Laboratory of Thermo-Fluid Science and Engineering (Xi’an Jiaotong University), Ministry of Education, Xi’an 710049, P.R. China

References (44)

Show source-provided references
1. Greenhouse gas emissions and reduction strategies for the world’s largest greenhouse gas emitters10.1016/j.scitotenv.2024.173895 ↗
2. Design and dynamic simulation of flue gas-molten salt heat exchanger in flexible operation coal-fired power plant10.1016/j.est.2024.112227 ↗
3. Greenhouse gases emissions and global climate change: Examining the influence of CO2, CH4, and N2O10.1016/j.scitotenv.2024.173359 ↗
4. Iakovidou, G., Itziou, A., Tsiotsias, A., Lakioti, E., Samaras, P., Tsanaktsidis, C., and Karayannis, V. (2024). Application of microalgae to wastewater bioremediation, with CO2 biomitigation, health product and biofuel development, and environmental biomonitoring. Appl. Sci., 14.10.3390/app14156727 ↗
5. Recent progress in electrochemical reduction of CO2 into formate and C2 compounds10.1007/s11814-021-1009-8 ↗
6. Evaluation of MgO as a promoter for the hydrogenation of CO2 to long-chain hydrocarbons over Fe-based catalysts10.1016/j.apcatb.2023.123052 ↗
7. Peddi, K.P., Ricci, S., and Rizzetto, L. (2024). Reduction potential of gaseous emissions in European ports using cold ironing. Appl. Sci., 14.10.3390/app14156837 ↗
8. Pathways for balancing CO2 emissions and sinks10.1038/ncomms14856 ↗
9. Monitoring the CO2 enhanced oil recovery process at the nanoscale: An in situ neutron scattering study10.1039/D1YA00058F ↗
10. Coupled optimization of carbon dioxide sequestration and CO2 enhanced oil recovery10.1016/j.petrol.2021.109257 ↗
11. Densities and volumetric characteristics of binary system of CO2 + decane from (303.15 to 353.15) K and pressures up to 19 MPa10.1021/je300388b ↗
12. High pressure densities and derived properties of biodiesel fuel produced by heterogeneous transesterification from biowaste10.2298/TSCI180723178M ↗
13. Modeling CO2 solubility in water using gradient boosting and light gradient boosting machine10.1038/s41598-024-63159-9 ↗
14. The role of supercritical carbon dioxide in modifying the phase and interfacial properties of multiphase systems relevant to combined EOR-CCS10.1016/j.fuel.2022.124271 ↗
15. Measurements and predictions of densities and viscosities in CO2 + hydrocarbon mixtures at high pressures and temperatures: CO2 + n-pentane and CO2 + n-hexane blends10.1016/j.molliq.2022.119518 ↗
16. Densities and viscosities of mixtures of carbon dioxide and n-decane from 310 to 403 K and 7 to 30 MPa10.1021/je00038a008 ↗
17. Volumetric behavior of decane + carbon dioxide at high pressures. Measurements and calculation10.1021/je010016k ↗
18. Compressed liquid densities and excess volumes of CO2 + decane mixtures from 313 to 363 K and pressures up to 25 MPa10.1021/je050020m ↗
19. High pressure densities of carbon dioxide + dipentaerythritol hexaheptanoate: New experimental setup and volumetric behavior10.1016/j.supflu.2011.06.004 ↗
20. Measurement and correlation of saturated liquid properties and gas solubility for decane, tetradecane and their binary mixtures saturated with carbon dioxide10.1016/j.fluid.2012.09.037 ↗
21. Phase composition and saturated liquid properties in binary and ternary systems containing carbon dioxide, n-decane, and n-tetradecane10.1016/j.jct.2012.08.019 ↗
22. Simulation and measurements of volumetric and phase behavior of carbon dioxide + higher alkanes at high pressure: CO2 + n-decane at temperatures (313–410) K and pressures up to 76 MPa10.1016/j.ijggc.2016.07.045 ↗
23. Volumetric behaviour of (carbon dioxide + hydrocarbon) mixtures at high pressures10.1016/j.supflu.2016.01.002 ↗
24. Yang, T., Sun, Y.K., Meng, X.Y., Wu, J.T., and Siepmann, J.I. (2021). Simultaneous measurement of the density and viscosity for n-decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa. J. Mol. Liq., 33.10.1016/j.molliq.2021.116646 ↗
25. Volumetric properties of binary mixtures of {difluoromethane (R32) + trans-1,3,3,3-tetrafluoropropene (R1234ze(E))} at temperatures from 283.15 K to 363.15 K and pressures up to 100 MPa10.1016/j.jct.2016.05.013 ↗
26. Compressed liquid densities of binary mixtures of n-decane + n-dodecane at temperatures from 283 K to 363 K and pressures up to 100 MPa10.1016/j.fluid.2017.12.010 ↗
27. Compressed liquid density measurements of dimethyl ether with a vibrating tube densimeter10.1016/j.jct.2011.04.011 ↗
28. Density measurements for 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) and trans-1,3,3,3-tetrafluoropropene (R1234ze(E))10.1016/j.jct.2013.01.006 ↗
29. Liquid density of n-pentene, n-hexene, and n-heptene at temperatures from 283.15 to 363.15 K and pressures up to 100 MPa10.1021/acs.jced.8b00229 ↗
30. Compressed liquid densities of binary mixtures of difluoromethane (R32) and 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) at temperatures from (283 to 363) K and pressures up to 100 MPa10.1016/j.jct.2019.105935 ↗
31. Liquid densities of n-octane, ethylcyclohexane and their binary mixtures {(x) n-octane) + (1 − x) ethylcyclohexane} at temperatures from (283 to 363) K and pressures up to 60 MPa10.1016/j.jct.2023.107121 ↗
32. Heat capacities and densities of liquid n-octane, n-nonane, n-decane, and n-hexadecane at temperatures from 318.15 K to 373.15 K and at pressures up to 10 MPa10.1016/S0021-9614(05)80173-9 ↗
33. Pressure dependence of the density of n-alkanes10.1007/BF00503881 ↗
34. pρTx data for the dimethyl carbonate + decane system10.1021/je0342320 ↗
35. Automated densimetric system: Measurements and uncertainties for compressed fluids10.1016/j.jct.2008.12.020 ↗
36. Thermophysical characterization of liquids using precise density and isobaric heat capacity measurements as a function of pressure10.1021/je8006875 ↗
37. Compressed liquid densities for the (n-heptane + n-decane) and (n-octane + n-decane) systems from T = (313 to 363) K10.1016/j.jct.2011.08.016 ↗
38. Phase equilibria in hydrocarbon systems the propane-n-butane system in the critical region10.1021/ie50361a026 ↗
39. Phase equilibria in hydrocarbon systems: Methane-decane systems10.1021/ie50365a034 ↗
40. Snyder, P.S., and Winnick, J. Pressure, volume, and temperature properties of liquid n-alkanes at elevated pressures. Proceedings of the 5th Symposium on Thermophysical Properties.
41. Isothermal compressibilities of n-alkanes and benzene10.1016/0021-9614(78)90144-1 ↗
42. Densities and heat capacities of 1-butanol + n-decane from 298 K to 400 K10.1016/0378-3812(86)87046-7 ↗
43. Lemmon, E.W., Bell, I.H., Huber, M.L., and McLinden, M.O. (2018). NIST reference fluid thermodynamic and transport properties database (Refprop V10.0). Standard Reference Data Program, National Institute of Standards and Technology.
44. Compressed liquid densities of binary mixtures of 1-butanol and diethylene glycol dimethyl ether from (283 to 363) K at pressures up to 100 MPa10.1021/acs.jced.7b00176 ↗