Orifice versus Converging-Nozzle Grid Turbulence: A Wavelet Perspective

Grids such as perforated plates are of fundamental importance in flow turbulence study and are commonly utilised to promote mixing. An orificed perforated plate (OPP) and its reversed counterpart, the converging-nozzle perforated plate (CNPP), were applied to produce quasi-isotropic turbulence inside a wind tunnel. The three orthogonal velocity components were measured using a triple hotwire at 10D downstream of the perforated plate for Reynolds numbers, ReD, 18,700 and 28,400, where D is the diameter of the perforated holes. The statistics of the grid-generated turbulence was analysed using the time-averaged local velocity profile and turbulence intensity, which revealed a more homogeneous distribution of the flow field with a higher level of turbulence for the OPP. Fourier and wavelet analyses were employed to investigate the energy of the eddies as a function of frequency and multiscale characteristics of the fluctuating velocity, respectively. At ReD = 18,700, the turbulent energy remains prominently with large-scale vortical structures which are non-intermittently present in the flow for both perforated plates. The thickness of the converging channels of the CNPP appears to provide the venue for spawning intermittent fluctuations. At higher ReD 28,400, the effect of this intermittent behaviour becomes evident for the CNPP, leading to a multiscale distribution of turbulent energy.