Buckling Capacity of Steel Spherical Shells According to B&M Procedure Compared to Selected Experimental Studies
Source abstract
Abstract
This article compares the results of estimating the buckling capacity of steel spherical shells using simple engineering formulas with the results of selected experimental studies that have been conducted over the past 70 years. It is worth noting that these studies were conducted by research centers from all over the world, and the tested coatings differed in material, manufacturing method, radius R, and thickness t. The test methods, procedures, and measurement tools were also different. The convergence of the results obtained between the proposed simple engineering approach, which is based on the provisions of EN-1993-1-6 and the recommendations in EDR5th, and the experimental studies is satisfactory, and in many cases the results obtained are almost identical. Therefore, it is possible to practically apply the developed algorithms for estimating the buckling capacity of steel spherical shells without worrying too much about the capacity reserve.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser and Thermal Forming Techniques · Structural Load-Bearing Analysis · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Civil Engineering, University of Zielona Góra, Licealna 9, 65-417 Zielona Góra, Poland
References (14)
Show source-provided references
1. Błażejewski, P., and Marcinowski, J. (2013, January 16–18). A new approach to the buckling resistance assessment of pressurized spherical shells; W: Shell Structures, Theory and Applications. Proceedings of the 10th SSTA Conference, Gdańsk, Polska.10.1201/b15684-43 ↗
2. Błażejewski, P., and Marcinowski, J. (2016, January 15–17). Buckling capacity curves for pressurized spherical shells; W: Recent Progress in Steel and Composite Structures. Proceedings of the XIII International Conference on Metal Structures-ICMS 2016, Zielona Góra, Polska.10.1201/b21417-55 ↗
3. Błażejewski, P. (2021). Development of a Procedure for the Determination of the Buckling Resistance of Steel Spherical Shells According to EC 1993-1-6. Materials, 15.10.3390/ma15010025 ↗
4. (2006). Eurocode 3: Design of Steel Structures, Part 1.6: Strength and Stability of Shell Structures (Standard No. EN1993-1-6).
5. Rotter, J.M., and Schmidt, H. (2008). Buckling of Steel Shells. European Design Recommendations, ECCS. [5th ed.].
6. Buckling of spherical shells subjected to external pressure: A comparison of experimental and theoretical data10.1016/j.tws.2016.11.012 ↗
7. Buckling of stainless steel spherical caps subjected to uniform external pressure10.1080/17445302.2018.1459358 ↗
8. Ultimate Strength Assessment of Steel-Welded Hemispheres under External Hydrostatic Pressure10.1007/s11804-020-00178-8 ↗
9. Kaplan, A., and Fung, Y.C. (1954). A Nonlinear Theory of Bending and Buckling of Thin Elastic Shallow Spherical Shells, California Institute of Technology. Technical Note 3112.
10. Seaman, L. (1962). The Nature of Buckling in Thin Spherical Shells, Watertown Arsenal Laboratories.
11. Elastic Stability of Near-Perfect Shallow Spherical Shells10.2514/3.2187 ↗
12. Blachut, J. (2004, January 15–21). Shallow spherical caps under external pressure. Proceedings of the XXI International Congress of Theoretical and Applied Mechanics, Warsaw, Poland.
13. Experimental investigations of buckling of pressurized spherical caps; W: Shell Structures: Theory and Applications
14. Experimental and numerical analyses of the buckling of steel, pressurized, spherical shells10.1177/1369433218774371 ↗