Evaluation of the Mineral Manganese OXMN009 and OXMN009P in the Chemical Looping Combustion (CLC) Process Using Thermogravimetry

Indirect combustion with the chemical looping combustion (CLC) of solid oxygen carriers is one of the most promising technologies for capturing carbon dioxide (CO2) in energy production from fossil fuels since the separation of the generated CO2 is inherent to the process itself. Therefore, the cost associated with capturing this gas will be significantly reduced. This technology transfers oxygen from air to fuel through a metal oxide that acts as an oxygen carrier, avoiding direct contact between air and fuel. This oxygen carrier circulates in a fluidized bed reactor called a reduction reactor and an oxidation reactor. (1) This research work has focused on evaluating the behavior of oxygen carriers based on the original and improved manganese mineral (copper-impregnated mineral) named for this study, OXMN009 and OXMN009P, respectively. (2) Equilibrium experiments were carried out on a thermogravimetric balance (TGA) to evaluate the kinetic behavior of these oxygen transporters OXMN009 and OXMN009P, using the gases methane (CH4), carbon monoxide (CO), and hydrogen (H2). (3) The enhanced solid oxygen carrier OXMN009P exhibited good performance for the CLC process with gaseous fuels in terms of reactivity and combustion efficiency, having high reactivity and oxygen transfer properties due to copper impregnation. (4) The results show that OXMN009P has comparable reactivity to other manganese-based materials reported in the literature. It may be an effective option for carbon dioxide capture, as it uses metal oxides as the oxygen transporters (TO). (5) These oxygen transporters, OXMN009 and OXMN009P, are used in a cyclic process that prevents the formation of nitrogen oxides by keeping the air and fuel separate. (6) Thermogravimetric balance (TGA) experiments were conducted to evaluate the kinetic behavior of these copper-modified oxygen transporters. (7) It was found that OXMN009P improved the reactivity and oxygen transfer properties due to copper impregnation. The kinetic parameters obtained in the TGA indicate that the reaction is non-thermal and requires less energy to initiate. (8) The results show that OXMN009P has reactivity comparable to other manganese-based materials reported in the literature and can be an effective option for carbon dioxide capture.