An Interactive Transient Model Correction Active Sonar Target Tracking Method

Active sonar can usually only directly measure the distance and bearing information of underwater targets, and cannot directly obtain target velocity, acceleration and other information. Therefore, the amount of information is relatively small, making it difficult to support the construction of complex motion models. At the same time, the motion state of underwater maneuvering targets is changeable. In response to the problem of detecting and tracking underwater moving targets by active sonar, this paper proposes a target transient model correction (TMC) filtering tracking method. Based on the conventional Kalman filter (KF) estimation, residual covariance is used as a signal quantity. When there is a large change in it, a transient filter with constant gain is adopted to filter the measurement value. The filtered output is used to correct the KF gain matrix and the target motion state model, to avoid the problem of increasing or even diverging KF estimation errors caused by changes in process noise. Using this method can solve the problem of maintaining stability and filtering estimation accuracy of active sonar tracking of underwater maneuvering targets with less computational and engineering costs.