journal article·2024-04-21Open access

Performance of Pile–Wall System Adjacent to Footings

Ghassan A. Sudani, Mien Jao

Applied Sciences· Volume 14· Issue 8

Abstract

The performance of a retaining wall is dependent on multiple factors including lateral earth pressure, which results from backfill soils and adjacent footings located behind a retaining wall. The prediction of a retaining wall’s performance in a footing–soil–wall system (FSPS) must incorporate the influences caused by the movement of a retaining wall. This study examines the performance of a retaining wall formed by driven, precast, concrete piles located adjacent to a concrete footing using two- and three-dimensional finite element analysis (2D and 3D FEA) by ANSYS 13.0 software. Both soil and concrete are assumed to behave as non-linear, elastic-perfectly plastic and rate-independent materials in compliance with the upper-bound model of Drucker–Prager yield criterion. Three backfill and foundation soils are considered: kaolin, silty clay, and kaolin–sand. Various conditions of soil type, footing shape ratio, pile width, and footing–pile distance through 180 FEA runs are investigated. The effects of 2D and 3D FEA on the behavior of the pile–wall system are compared. The lateral deflection and pressure distribution profiles along the pile–wall are studied and presented. Two empirical equations predicting lateral deflections at the pile toe and pile head and useful for pile structural design are developed under the ultimate pressure of the adjacent footing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures · Civil and Structural Engineering Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Independent Researcher, West Chester, OH 45069, USA

Department of Civil and Environmental Engineering, Lamar University, 4400 MLK Blvd., Beaumont, TX 77710, USA

References (40)

Show source-provided references
1. Coulomb, C.A. (1776). Essai sur une Application des Règles de Maximis et Minimis Aquelques Problèmes de Statique, Relatifs a l’Architecture, Imprimerie Royale. (In French).
2. On the Stability of Loose Earth
3. Coduto, D.P. (2001). Foundation Design: Principles and Practices, Prentice-Hall, Inc.. [2nd ed.].
4. Bell, A.L. (1915). Minutes of the Proceedings of the Institution of Civil Engineers, ICE Publishing.
5. Terzaghi, K., Peck, R.B., and Mesri, G. (1996). Soil Mechanics in Engineering Practice, John Wiley and Sons, Inc.. [3rd ed.].
6. Reliability Analysis of Partial Safety Factor Design Method for Cantilever Retaining Walls in Granular Soils10.1061/(ASCE)GT.1943-5606.0000061 ↗
7. O’Rourke, T.D., and Jones, C.J.F.P. (1990, January 18–21). Overview of Earth Retention Systems: 1970–1990. Proceedings of the Conference of Design and Performance of Earth Retaining Structures, New York, NY, USA.
8. Teng, W.C. (1962). Foundation Design, Prentice-Hall, Inc.
9. Das, B. (2011). Principles of Foundation Engineering, Global Engineering/Cengage Learning. [7th ed.].
10. Li, R.-P. (2009, January 3–6). Stability Analysis of Cutting Slope Reinforced with Anti-slide Piles by FEM. Proceedings of the Slope Stability, Retaining Walls, and Foundations, Changsha, China.10.1061/41049(356)24 ↗
11. Duncan, J.M., Glough, G.W., and Ebeling, R.M. (1990, January 18–21). Behavior and Design of Gravity Earth Retaining Structures. Proceedings of the Conference of Design and Performance of Earth Retaining Structures, New York, NY, USA.
13. Jiang, J., Qi, B., Zhou, J., and Zeng, Q. (2010, January 3–5). Model Test and PFC2D Numerical Analysis on Soil Arching Effects Surrounding Passive Laterally Loaded Piles. Proceedings of the Soil Behavior and Geo-Micromechanics, Geotechnical Special Publications (GSP) 200, Shanghai, China.10.1061/41101(374)36 ↗
14. Total Lateral Surcharge Pressure due to Strip Load
15. Smith, G.N., and Smith, I.G. (1998). Elements of Soil Mechanics, Blackwell Science, Inc.. [7th ed.].
16. Wang, Z., Liu, X., and Wang, W. (2022). Calculation of Nonlimit Active Earth Pressure against Rigid Retaining Wall Rotating about Base. Appl. Sci., 12.10.3390/app12199638 ↗
17. Dang, F., Wang, X., Cao, X., Gao, J., Ding, J., and Zhang, L. (2023). Calculation Method of Earth Pressure Considering Wall Displacement and Axial Stress Variations. Appl. Sci., 13.10.3390/app13169352 ↗
18. Strip Footing Behavior on Pile and Sheet Pile-Stabilized Sand Slope10.1061/(ASCE)1090-0241(2005)131:6(705) ↗
19. Sudani, G.A. (2013). Stability of Footings Adjacent to Spaced Pile-Row. [Master’s Dissertation, Lamar University].
20. Stability of Footings Adjacent to Pile Walls10.1061/(ASCE)GM.1943-5622.0000480 ↗
21. Interaction between Strip Footings and Sheet Pile Walls
22. Evaluation of Model Sheet Pile Wall Adjacent to a Strip Footing—An Experimental Investigation10.1080/19386362.2019.1581459 ↗
23. Performance of Axially Loaded-Piled Retaining Wall: Experimental and Numerical Analysis10.1061/(ASCE)GM.1943-5622.0000710 ↗
24. Ter-Martirosyan, A.Z., and Vanina, Y.V. (2023). A Mathematical Analysis of the Stress Statement of the Soil Basis under Complex Loading near the Retaining Wall. Axioms, 12.10.3390/axioms12060536 ↗
25. Fan, X., Xu, C., and Liang, L. (2023). Experimental and Theoretical Study for a Displacement-Controlled Design Method of Embedded Cantilever Retaining Walls (Piles). Sustainability, 15.10.3390/su15129831 ↗
26. A Comparative Study of Embedded Wall Displacements Using Small-Strain Hardening Soil Model10.3390/geotechnics4010016 ↗
27. ANSYS13.0 (2010). Help System//Mechanical APDL, SAS IP, Inc.
28. Soil Mechanics and Plastic Analysis in Limit Design10.1090/qam/48291 ↗
29. Badie, A. (1983). Stability of Spread Footing Supported by Clay Soil with an Underground Void. [Ph.D. Thesis, The Pennsylvania State University].
30. Baus, R.L. (1980). The Stability of Shallow Continuous Footings Located above Voids. [Ph.D. Thesis, The Pennsylvania State University].
31. Azam, G. (1988). Performance of Strip Footing on Two-Layer Soil Deposit with Void. [Master’s Thesis, The Pennsylvania State University].
32. Bearing Capacity of Strip Footing above Void10.1061/(ASCE)0733-9410(1983)109:1(1) ↗
33. Stability of Spread Footing above Void in Clay10.1061/(ASCE)0733-9410(1984)110:11(1591) ↗
34. Performance of Strip Footing on Stratified Soil Deposit with Void10.1061/(ASCE)0733-9410(1991)117:5(753) ↗
35. Azam, G. (1990). Stability of Shallow Continuous Footings Supported by Two-Layer Soil Deposits with an Underground Void. [Ph.D. Thesis, The Pennsylvania State University].
36. Bowles, J. (1996). Foundation Analysis and Design, McGraw-Hill Co., Inc.. [5th ed.].
37. Som, N., and Das, S. (2003). Theory and Practice of Foundation Design, Prentice-Hall of India.
38. Tomlinson, M., and Woodward, J. (2008). Pile Design and Construction Practice, Taylor & Francis Group. [5th ed.].10.4324/9780203964293 ↗
39. Minitab16.0 (2010). Help Manual, Minitab, Inc.
40. Montgomery, D., Runger, G., and Hubele, N. (2011). Engineering Statistics, John Wiley and Sons, Inc.