Stator Design Method in Rotor–Stator Interference Flow Fields in Order to Suppress the Vibration of Bladed Disks
Source abstract
Abstract
Based on the computation and analysis of three-dimensional unsteady flow induced by rotor/stator interactions, the characteristics of flow excitation towards bladed disks were studied, including frequency components and circumferential wave components. By combining the resonant condition of bladed disks, a design principle was derived for determining the stator structural period from the view of averting resonance. The influences of different topologies on mistuned stators are also studied, for which the sectional non-uniform mistuned stator showed a clear effect in lowering the amplitude of formal excitation characteristics compared to tuned cases. A formula was developed to predict frequency components and circumferential wave components in the wake of both tuned and mistuned stators, making it easier to determine stator structural topologies in the design phase without performing three-dimensional unsteady CFD.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bladed Disk Vibration Dynamics · Turbomachinery Performance and Optimization · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072, China
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
References (32)
Show source-provided references
1. Kielb, J.J., Abhari, R.S., and Dunn, M.G. (2001, January 4–7). Experimental and numerical study of forced response in a full-scaled rotating turbine. Proceedings of the ASME Turbo Expo 2001: Power for Land, Sea, and Air, New Orleans, LA, USA.10.1115/2001-GT-0263 ↗
2. An integrated nonlinear approach for turbomachinery forced response prediction. part I:formulation10.1006/jfls.1999.0253 ↗
3. A finite element analysis for the vibration modes of a bladed disc10.1016/0022-460X(76)90829-4 ↗
4. Wang, P.-Y. (2014). Research on Vibration Suppression Theory of Bladed Disk of Aeroengine under Fluid Excitation, Beijing University of Aeronautics and Astronautics.
5. Xin, J.-Q. (2011). Researches on Typical Problems of Blisk Rotor Vibration in Turbomachinery, Beijing University of Aeronautics and Astronautics.
6. Yao, J.-Y. (2010). Forced Response Analysis of Bladed Disk under Fluid Excitation, Beijing University of Aeronautics and Astronautics.
7. Excitation of rotationally periodic structures10.1115/1.3424671 ↗
8. Zhao, Z., Song, W., Jin, Y., and Lu, J. (2021). Effect of Rotational Speed Variation on the Flow Characteristics in the Rotor-Stator System Cavity. Appl. Sci., 11.10.3390/app112211000 ↗
9. An experimental study of the instability of the laminar Ekman boundary layer10.1017/S0022112063000458 ↗
10. Flow between a Rotating and a Stationary Disc10.1017/S000192590000514X ↗
11. Owen, J.M. (1989). Flow and Heat Transfer in Rotating-Disc Systems, JohnWiley Sons Inc.
12. Low-Engine-Order Excitation Mechanisms in Axial-Flow Turbomachinery
13. An Integrated Time-Domain Aeroelasticity Model for the Prediction of Fan Forced Response due to Inlet Distortion10.1115/1.1416151 ↗
14. Leakage-Induced Compressor Blade Excitation due to Inter-Segment Gaps
15. Asymmetry stator mistuned blade design and research
16. Study on the influence of aerodynamic mistuned on unsteady aerodynamic force of blade
17. Forced response characteristic of bladed disk with aerodynamic mistuning
18. Kemp, R.H., and Hirschberg, M.H. (1958). Theoretical and Experimental Analysis of the Reduction of Rotor Blade Vibration in Turbomachinery Through the Use of Modified Stator Vane Spacing, NACA.
19. Transient analytical method of vane forcing response under stator-rotor wake influence
20. Numerical study on the stator solidity characteristics of axial turbine element stages
21. The effects of radial inlet with splitters on the performance of variable inlet guide vanes in a centrifugal compressor stage10.1177/0954406211407799 ↗
22. Experiment on treating block number of non-axisymmetric casing treatment
23. Gottfried, D., and Fleeter, S. (2002, January 7–10). Passive detuning for HCF reduction. Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Indianapolis, Indiana.10.2514/6.2002-3634 ↗
24. Figaschewsky, F., Giersch, T., and Kühhorn, A. (2014, January 16–20). Forced response prediction of an axial turbine rotor with regard to aero-dynamically mistuned excitation. Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany.10.1115/GT2014-25896 ↗
25. A subjective test of modulated blade spacing for helicopter main rotors10.4050/1.3092840 ↗
26. Edwards, B., and Booth, E.R. (2002). Psychoacoustic Testing of Modulated Blade Spacing for Main Rotors, NASA. Contractor Report.
27. A Review of Aeroelasticity Methods with Emphasis on Turbomachinery Applications10.1006/jfls.1996.0015 ↗
28. Flutter and Resonant Vibration Characteristics of Engine Blades10.1115/1.2817053 ↗
29. Investigation of Mistuning Effects on Cascade Flutter Using a Coupled Method10.2514/1.18876 ↗
30. Supersonic turbomachinery rotor flutter control by aerodynamic detuning10.2514/3.23659 ↗
31. Forced response analysis of an aerodynamically detuning supersonic turbomachine rotor10.1115/1.3269311 ↗
32. The effect of circumferential aerodynamic detuning on coupled bending-torsion unstalled supersonic flutter10.1115/1.3262045 ↗