An Experimental Study on Efficient Piezoelectric Coupled Beams and Corresponding Piezoelectric Bricks

In view of the low output power density of the existing footstep harvesters, two pairs of distinctive L-shaped beams and the corresponding piezoelectric brick models are developed to improve the utilization efficiency of the piezoelectric patches bonded on the beams. A theory model of the aforesaid L-shaped beam is established to analyze its dynamic performance. Two pairs of L-shaped beams and corresponding piezoelectric brick specimens are customized. The influences of some factors on the output voltage and average power from piezoelectric patches of aforesaid piezoelectric bricks are tested and analyzed. Numerical computation based on the theory model of L-shaped beam is conducted to extend the study on the electric output performances of the proposed piezoelectric bricks. Experiment and simulation results indicate that the peak-to-peak voltage and average power can reach up to 376 V (0.15 V/mm3) and 94.72 mW (37.89 μW/mm3) for a piezoelectric patch with a dimension of 50 mm × 50 mm × 1 mm of brick specimens. This research provides novel piezoelectric bricks to harvest footstep energy and obtains some instructive conclusions for the practical design of the piezoelectric brick with ideal energy harvesting efficiency and cost-effectiveness.