Influence of unloading orifice size on the production of microsized ore particles by gas rapid unloading
Source abstract
Abstract
Gas rapid unloading (GRU) is an innovative technology for ore comminution. Increasing the production of fine powder in each ore grinding cycle is vital for scaling up the GRU method to industrial applications. This study utilizes laboratory experiments to demonstrate that moderately reducing the orifice size significantly enhances pulverization and increases fine particle yield. Numerical simulations suggest that smaller orifices improve pulverization by increasing jet speed, reducing pressure drop, and creating a larger pressure difference inside and outside the unloading orifice. The orifice size should be optimized based on feed size to ensure efficient ore discharge. Reducing the unloading orifice size improves GRU grinding efficiency and energy use, offering guidance for the design of ore discharge ports in future industrial-scale equipment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mineral Processing and Grinding · Minerals Flotation and Separation Techniques · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. P.C. Sauer and S. Seuring, Sustainable supply chain management for minerals, J. Cleaner Prod., 151(2017), p. 235.10.1016/j.jclepro.2017.03.049 ↗
2. S.H. Ali, D. Giurco, N. Arndt, et al., Mineral supply for sustainable development requires resource governance, Nature, 543(2017), No. 7645, p. 367.10.1038/nature21359 ↗
3. M.C. Fuerstenau and K.N. Han, Principles of Mineral Processing, Society for Mining, Metalluryy, and Exploration, Englewood, 2003.
4. J.P. Duroudier, Size Reduction of Divided Solids, Elsevier, Amsterdam, 2016.
5. United Nations Framework Convention on Climate Change, The Paris Agreement, PhoenixDesignAid, Denmark [2018-11-25]. https://unfccc.int/documents/184656
6. Y.K. Liu, Y.M. Wang, and Q.S. Chen, Using cemented paste backfill to tackle the phosphogypsum stockpile in China: A down-to-earth technology with new vitalities in pollutant retention and CO2 abatement, Int. J. Miner. Metall. Mater., 31(2024), No. 7, p. 1480.10.1007/s12613-023-2799-y ↗
7. T. Ou, J. Liu, W. Chen, Z.P. Ma, and Y.W. Xiong, A novel IoT sensor and evolution model for grinding mill liner wear monitoring, Miner. Eng., 217(2024), art. No. 108959.10.1016/j.mineng.2024.108959 ↗
8. Y.W. Liu, G.W. Yan, R. Li, S.Y. Xiao, M.F. Ren, and L. Cheng, Multi- source unsupervised domain adaptive mill load forecasting method based on deep learning and fusion features, Miner. Eng., 209(2024), art. No. 108650.10.1016/j.mineng.2024.108650 ↗
9. N. Matsanga, W. Nheta, and N. Chimwani, A review of the grinding media in ball mills for mineral processing, Minerals, 13(2023), No. 11, art. No. 1373.10.3390/min13111373 ↗
10. A. Valero and A. Valero, Exergy of comminution and the thanatia earth’s model, Energy, 44(2012), No. 1, p. 1085.10.1016/j.energy.2012.04.021 ↗
11. J. Jeswiet and A. Szekeres, Energy consumption in mining comminution, Procedia CIRP, 48(2016), p. 140.10.1016/j.procir.2016.03.250 ↗
12. D.W. Fuerstenau and A.Z.M. Abouzeid, The energy efficiency of ball milling in comminution, Int. J. Miner. Process., 67(2002), No. 1–4, p. 161.10.1016/S0301-7516(02)00039-X ↗
13. B.P. Numbi, J. Zhang, and X. Xia, Optimal energy management for a jaw crushing process in deep mines, Eergyy, 68(2014), p. 337.
14. M. Johansson, M. Bengtsson, M. Evertsson, and E. Hulthén, A fundamental model of an industrial-scale jaw crusher, Miner. Eng., 105(2017), p. 69.10.1016/j.mineng.2017.01.012 ↗
15. A. Bahrami, M. Abdollahi, M. Mirmohammadi, F. Kazemi, A. Danesh, and M. Shokrzadeh, A process mineralogy approach to study the efficiency of milling of molybdenite circuit processing, Sci. Rep., 10(2020), No. 1, art. No. 21211.10.1038/s41598-020-78337-8 ↗
16. J.P. Duroudier, Ball and rod mills, [in] Size Reduction of Divided Solids, Elsevier, Vol. 3, Amsterdam, 2016, p. 73.10.1016/B978-1-78548-185-7.50003-5 ↗
17. A.S. Yamashita, A. Thivierge, and T.A.M. Euzébio, A review of modeling and control strategies for cone crushers in the mineral processing and quarrying industries, Miner. Eng., 170(2021), art. No. 107036.10.1016/j.mineng.2021.107036 ↗
18. P.W. Cleary and R.D. Morrison, Geometric analysis of cone crusher liner shape: Geometric measures, methods for their calculation and linkage to crusher behaviour, Miner. Eng., 160(2021), art. No. 106701.10.1016/j.mineng.2020.106701 ↗
19. P. Gao, W.T. Zhou, Y.X. Han, Y.J. Li, and W.L. Ren, Enhancing the capacity of large-scale ball mill through process and equipment optimization: An industrial test verification, Adv. Powder Technol., 31(2020), No. 5, p. 2079.10.1016/j.apt.2020.03.001 ↗
20. M. Laurence, M. Rujeko, K. Tatenda, and C. Kudzanayi, Ball mill energy efficiency optimization techniques: A review, i-Manag. J. Mech. Eng., 13(2023), No. 4, art. No. 41.10.26634/jme.13.4.20053 ↗
21. L.X. Li, B. Wei, Q. Zhang, et al., Evaluating the performance of an industrial-scale high pressure grinding rolls (HPGR)-tower mill comminution circuit, Miner. Eng., 191(2023), art. No. 107973.10.1016/j.mineng.2022.107973 ↗
22. C.W. Zhang, Y.D. Zou, D.Z. Gou, A.B. Yu, and R.Y. Yang, Experimental and numerical investigation of particle size and particle strength reduction in high pressure grinding rolls, Powder Technol., 410(2022), art. No. 117892.10.1016/j.powtec.2022.117892 ↗
23. C. Cooper, P. Wang, J.J. Zhang, et al., Convolutional neural network-based tool condition monitoring in vertical milling operations using acoustic signals, Procedia Manaf., 49(2020), p. 105.
24. C.T. Jayasundara, R.Y. Yang, and A.B. Yu, Effect of the size of media on grinding performance in stirred mills, Miner. Eng., 33(2012), p. 66.10.1016/j.mineng.2011.10.012 ↗
25. L. Taylor, D. Skuse, S. Blackburn, and R. Greenwood, Stirred media mills in the mining industry: Material grindability, energy-size relationships, and operating conditions, Powder Technol., 369(2020), p. 1.10.1016/j.powtec.2020.04.057 ↗
26. M. Can and O. Altun, Performance comparison of the vertical and horizontal oriented stirred mill: Pilot scale IsaMill vs. full-scale HIGMill, Minerals, 13(2023), No. 3, art. No. 315.10.3390/min13030315 ↗
27. K.R. Rajaonarivony, C. Mayer-Laigle, B. Piriou, and X. Rouau, Comparative comminution efficiencies of rotary, stirred and vibrating ball-mills for the production of ultrafine biomass powders, Energy, 227(2021), art. No. 120508.10.1016/j.energy.2021.120508 ↗
28. W. Huang and Y.M. Chen, The application of high voltage pulses in the mineral processing industry - A review, Powder Technol., 393(2021), p. 116.10.1016/j.powtec.2021.07.003 ↗
29. U. Andres and R. Bialecki, Liberation of mineral constituents by high-voltage pulses, Powder Technol., 48(1986), No. 3, p. 269.10.1016/0032-5910(86)80052-3 ↗
30. P. Gao, Y.H. Qin, Y.X. Han, Y.J. Li, and S.Y. Liu, Strengthening leaching effect of Carlin-type gold via high-voltage pulsed discharge pretreatment, Int. J. Miner. Metall. Mater., 28(2021), No. 6, p. 965.10.1007/s12613-020-2012-5 ↗
31. Z.L. Ge, H.W. Zhang, Z. Zhou, et al., Experimental study on the characteristics and mechanism of high-pressure water jet fracturing in high-temperature hard rocks, Energy, 270(2023), art. No. 126848.10.1016/j.energy.2023.126848 ↗
32. Y. Natarajan, P.K. Murugesan, M. Mohan, and S.A. Liyakath Ali Khan, Abrasive water jet machining process: A state of art of review, J. Manaf. Process., 49(2020), p. 271.10.1016/j.jmapro.2019.11.030 ↗
33. A.J. Swart and P. Mendonidis, Evaluating the effect of radio-frequency pre-treatment on granite rock samples for comminution purposes, Int. J. Miner. Process., 120(2013), p. 1.10.1016/j.minpro.2013.02.002 ↗
34. A.J. Buttress, J.M. Rodriguez, A. Ure, R.S. Ferrari, C. Dodds, and S.W. Kingman, Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment, Miner. Eng., 131(2019), p. 407.10.1016/j.mineng.2018.11.025 ↗
35. Y.B. Fan, W.J. Duan, S.H. Li, and J.Y. Qiao, Experiment on micron-sized particle production of iron ore by rapid unloading of liquid CO2, Powder Technol., 327(2018), p. 449.10.1016/j.powtec.2017.12.039 ↗
36. Y.B. Fan, J.Y. Qiao, S.H. Li, and C. Feng, Micron-sized silicon carbide particle production via rapid unloading of high-pressure liquid CO2, J. Aast. Ceram. Soc., 55(2019), No. 2, p. 595.10.1007/s41779-018-0267-3 ↗
37. M. Hesse, P. Asetre, R. Anderson, et al., Experimental demonstration of comminution with transcritical carbon dioxide cycles, Powder Technol., 407(2022), art. No. 117615.10.1016/j.powtec.2022.117615 ↗
38. Y.B. Fan, C. Feng, S.H. Li, et al., Production of micron-sized particles of bauxite by circulating pulverization experiment, Adv. Mater. Sci. Eng., 2022(2022), No. 1, art. No. 6889003.10.1155/2022/6889003 ↗
39. K. Schönert, Breakage of spheres and circular discs, Powder Technol., 143–144(2004), p. 2.10.1016/j.powtec.2004.04.004 ↗
40. Q. Yin, F. Wen, Z.G. Tao, et al., Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression, Int. J. Miner. Metall. Mater., 32(2025), No. 2, p. 311.10.1007/s12613-024-3014-5 ↗
41. G.H. Zhang, Y.B. Fan, R.S. Yang, and S.H. Li, Influence of ore size on the production of micro-sized ore particles by high-pressure gas rapid unloading, Powder Technol., 427(2023), art. No. 118716.10.1016/j.powtec.2023.118716 ↗
42. P.A. Vesilind, The Rosin-Rammler particle size distribution, Resour. Recovery Conserv., 5(1980), No. 3, p. 275.10.1016/0304-3967(80)90007-4 ↗
43. R. Kumar, S.R. Gopireddy, A.K. Jana, and C.M. Patel, Study of the discharge behavior of Rosin-Rammler particle-size distributions from hopper by discrete element method: A systematic analysis of mass flow rate, segregation and velocity profiles, Powder Technol., 360(2020), p. 818.10.1016/j.powtec.2019.09.044 ↗
44. H.Y. Cheng, S.C. Wu, X.Q. Zhang, and A.X. Wu, Effect of particle gradation characteristics on yield stress of cemented paste backfill, Int. J. Miner. Metall. Mater., 27(2020), No. 1, p. 10.10.1007/s12613-019-1865-y ↗