journal article·2021-08-09Open access

The Breakage of Shape-Anisotropic Particles under Normal Contact with Different Particle Shape Parameters

Yanwei Zhang, Qiwei Jian, Jian Zhou, Qinglin Huang, Lin Li, Yiran Niu

Applied Sciences· Volume 11· Issue 16

Abstract

This paper elaborates the cone–hemispherical gypsum particle breakages under normal contact with different particle shape parameters (contact diameter d, cone angle θ and sphere diameter D) and proposes a simple quantitative approach to discriminate breakage modes. The effects of the particle shape parameters on particle breakage are investigated through analyzing breakage processes, breakage modes and force–displacement curves. Three breakage modes are formed during the breakage experiments: peeling, peeling–splitting and splitting, corresponding to three different normal force–displacement curves. The formation of a conical core is deemed as the precondition for particle splitting. The particle breakage mode transfers from peeling to splitting with the increase in contact diameter d and cone angle θ, but a decrease in sphere diameter D. The critical normal force Fcr is positively linearly related to contact diameter d and cone angle θ, but the relationship between Fcr and sphere diameter D heavily depends on the breakage mode. Furthermore, the critical contact diameter dcr described by cone angle θ and sphere diameter D is proposed to discriminate breakage modes of the cone–hemispherical gypsum particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China

School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China

Key Laboratory of Geotechnical and Underground Engineering, Ministry of Education, Tongji University, Shanghai 200092, China

Engineering Department, Yantai Longfor Properties Co., Ltd., Yantai 264100, China

Funding

National Natural Science Foundation of China

References (33)

Show source-provided references
1. Significance of particle crushing in granular materials10.1061/(ASCE)0733-9410(1996)122:4(309) ↗
2. Review of wetting-induced collapse in compacted soil10.1061/(ASCE)0733-9410(1992)118:9(1376) ↗
3. Settlement and slaking problems in the world’s fourth largest rock-fill dam, the Ataturk Dam in Turkey10.1016/S0013-7952(99)00049-6 ↗
4. A review of Beliche dam10.1680/geot.2005.55.4.267 ↗
5. Joint back analysis of the creep deformation and wetting deformation parameters of soil used in the Guanyinyan composite dam10.1016/j.compgeo.2017.10.018 ↗
6. Effect of particle morphology and contacts on particle breakage in a granular assembly studied using X-ray tomography10.1007/s10035-019-0898-2 ↗
7. Particle breakage of rockfill material during triaxial tests under complex stress paths
8. Characteristics of direct shear and particle breakage of pebble gravel materials10.1155/2020/8820045 ↗
9. Dilatancy and critical state of calcareous sand incorporating particle breakage
10. Effect of particle breakage and shape on the mechanical behaviors of granular materials
11. Effect of particle shape and confining pressure on breakage and deformation of artificial rockfill10.1007/s40891-019-0164-z ↗
12. Evolution of impact breakage characterisation: Redefining t-family relationship10.1016/j.minpro.2017.10.001 ↗
13. Impact of particle shape on breakage of recycled construction and demolition aggregates10.1016/j.powtec.2016.11.043 ↗
14. Discrete element modeling of crushable sands considering realistic particle shape effect10.1016/j.compgeo.2017.07.016 ↗
15. A boundary-spheropolygon element method for modelling sub-particle stress and particle breakage10.1016/j.compgeo.2019.05.002 ↗
16. Imaging indices for quantification of shape, angularity, and surface texture of aggregates10.3141/1721-07 ↗
17. Evaluation of image analysis techniques for quantifying aggregate shape characteristics10.1016/j.conbuildmat.2006.03.005 ↗
18. Effects of coarse aggregate form, angularity, and surface texture on concrete mechanical performance10.1061/(ASCE)MT.1943-5533.0002849 ↗
19. The independent characterization and experimental study of coarse aggregate angularity10.1080/02726351.2019.1675111 ↗
20. Effects of size and shape on the crushing strength of coral sand particles under diametral compression test
21. Effect of particle characteristics stress on the mechanical properties of cement mortar with coral sand10.1016/j.conbuildmat.2020.119836 ↗
22. Effects of particle size and confining pressure on breakage factor of rockfill materials using medium triaxial test10.1016/j.jrmge.2015.12.005 ↗
23. Influence of particle size on particle breakage and shear strength of weak rockfill10.1007/s10064-020-01889-6 ↗
24. Particle breakage of granular materials during sample preparation10.1016/j.jrmge.2018.12.001 ↗
25. Particle size effects on breakage of ACT aggregates under physical and environmental loadings10.1061/(ASCE)HZ.2153-5515.0000468 ↗
26. The effect of size on the strength of coarse rock aggregates and large rockfill samples through experimental data10.1007/s00707-014-1127-z ↗
27. The relevance of roundness to the crushing strength of granular materials10.1680/jgeot.15.P.226 ↗
28. Experimental study on particle breakage of coarse-grained soil considering normal contact force
29. An investigation of breakage behavior of single sand particles using a high-speed microscope camera10.1680/jgeot.15.P.247 ↗
30. A particle model for rockfill behavior10.1680/jgeot.14.P.170 ↗
31. Yu, S., Jia, M., Zhou, J., Zhao, C., and Li, L. (2019). Micro-mechanism of spherical gypsum particle breakage under ball–plane contact condition. Appl. Sci., 9.10.3390/app9224795 ↗
32. Niu, Y., Li, L., Zhang, Y., Yu, S., and Zhou, J. (2021). Micromechanism of the breakage of two spherical gypsum particles under normal–tangential contact conditions. Appl. Sci., 11.10.3390/app11094039 ↗
33. An investigation of single sand particle fracture using X-ray micro-tomography10.1680/geot.4.P.157 ↗