Microstructure and properties of laser direct deposited CuNi17Al3Fe1.5Cr alloy
Source abstract
Abstract
Thin walls of a copper-base alloy with the nominal composition CuNi17Al3Fe1.5Cr were successfully prepared by laser direct deposition additive manufacturing. The microstructure, as revealed by optical and scanning electron microscopy, indicated that the deposited material was fully dense and with a dendritic microstructure. The dendrites are parallel to the build-up direction, which is also the heat conduction direction during deposition. X-ray diffraction analysis results show that the deposited material is composed of a single phase and a copper-based solid solution. Some precipitate particles of metal silicides were observed in the interdendritic region by scanning electron microscopy. The ultimate tensile strength along the laser scanning direction reaches 735 MPa. The hardness is about Hv0.1 300.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. J.L. Chen, Z.Q. Luo, W.W. Zhang, and Y.Y. Li, Effects of Ni on the microstructure and properties of heat resistant cast Cu-Ni-Al alloy, Spec. Cast. Nonferrous Alloys, 29(2009), No.5, p.483.
2. Z.Q. Luo, W.W. Zhang, J.L. Chen, and Y.Y. Li, Microstructure and property of high-strength heat-resistant Cu-Ni-based alloy prepared by centrifugal casting, J. Mater. Eng., 2009, Suppl.1, p.146.10.1016/j.msea.2008.09.059 ↗
3. Q. Li and Q. Wang, Research and prospects on strengthening methods of high-strength and high-conductivity Cu alloy, Hot Work. Technol., 38(2009), No.36, p.8.
4. P.A. Kobryn and S.L. Semiatin, The laser additive manufacture of Ti-6Al-4V, JOM, 53(2001), No.9, p.40.10.1007/s11837-001-0068-x ↗
5. F.D. Wang, J. Mei, and X.H. Wu, Microstructure study of direct laser fabricated Ti alloys using powder and wire, Appl. Surf. Sci., 253(2006), No.3, p.1424.10.1016/j.apsusc.2006.02.028 ↗
6. L.F. Cai, Y.Z. Zhang, and L.K. Shi, Microstructure and formation mechanism of titanium matrix composites coating on Ti-6Al-4V by laser cladding, Rare Met., 26(2007), No.4, p.342.10.1016/S1001-0521(07)60226-5 ↗
7. L. Sexton, S. Lavin, G. Byrne, and A. Kennedy, Laser cladding of aerospace materials, J. Mater. Process. Technol., 122(2002), No.1, p.63.10.1016/S0924-0136(01)01121-9 ↗
8. L.J. Xue, Direct manufacturing of net-shape functional components by laser consolidation process, Chin. J. Lasers, 36(2009), No.12, p.3179.10.3788/CJL20093612.3179 ↗
9. S.Y. Zhang, X. Lin, J. Cheng, and W.D. Huang, Heat-treated microstructure and mechanical properties of laser solid forming Ti-6Al-4V alloy, Rare Met., 28(2009), No.6, p.537.10.1007/s12598-009-0104-5 ↗
10. P.L. Blackwell and A. Wisbey, Laser-aided manufacturing technologies; their application to the near-net shape forming of a high-strength titanium alloy, J. Mater. Process. Technol., 170(2005), No.1–2, p.268.10.1016/j.jmatprotec.2005.05.014 ↗
11. Y.Z. Zhang, Z.M. Wei, L.K. Shi, and M.Z. Xi, Characterization of laser powder deposited Ti-TiC composites and functional gradient materials, J. Mater. Process. Technol., 206(2008), No.1–3, p.438.10.1016/j.jmatprotec.2007.12.055 ↗
12. S.Y. Qu, Y.F. Han, and L.G. Song, Effects of alloying elements on phase stability in Nb-Si system intermetallics materials, Intermetallics, 15(2007), No.5–6, p.810.10.1016/j.intermet.2006.10.044 ↗