Special Issue “Composite Materials in Design Processes”
Source abstract
Abstract
Composite materials have been used in design since antiquity, as the description of the Ulises’ arch in the Odyssey suggests [...]
Only a short abstract or summary was supplied by the source.
Source: crossref · Quality: short
Research context
OpenAlex topics: Material Selection and Properties · Natural Fiber Reinforced Composites · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering (DIN), Alma Mater Studiorum, Università di Bologna, 47121 Forlì, Italy
References (25)
Show source-provided references
1. Verity, A., and Allan, W. (2016). Homer. The Odyssey, Oxford University Press. Chapter XXI.
2. Saghafi, H., Palazzetti, R., Heidary, H., Brugo, T.M., Zucchelli, A., and Minak, G. (2020). Toughening Behavior of Carbon/Epoxy Laminates Interleaved by PSF/PVDF Composite Nanofibers. Appl. Sci., 10.10.3390/app10165618 ↗
3. Saghafi, H., Fotouhi, M., and Minak, G. (2018). Improvement of the Impact Properties of Composite Laminates by Means of Nano-Modification of the Matrix—A Review. Appl. Sci., 8.10.3390/app8122406 ↗
4. Shear mode of fracture in composite laminates toughened by polyvinylidene fluoride nanofibers10.1016/j.compstruct.2019.111327 ↗
5. Comparing various toughening mechanisms occurred in nanomodified laminates under impact loading10.1016/j.compositesb.2019.106964 ↗
6. Effect of nanofiber diameter and arrangement on fracture toughness of out of autoclave glass/phenolic composites—Experimental and numerical study10.1016/j.tws.2019.106251 ↗
7. Fotouhi, M., Fragassa, C., Fotouhi, S., Saghafi, H., and Minak, G. (2019). Damage characterization of nano-interleaved CFRP under static and fatigue loading. Fibers, 7.10.3390/fib7020013 ↗
8. Wang, Y., Li, Y., Zhang, Z., Zhao, H., and Zhang, Y. (2019). Repair Performance of Self-Healing Microcapsule/Epoxy Resin Insulating Composite to Physical Damage. Appl. Sci., 9.10.3390/app9194098 ↗
9. Townsend, P., Suárez Bermejo, J.C., Pinilla, P., and Muñoz, N. (2020). Is the Viscoelastic Sheet for Slamming Impact Ready to Be Used on Glass Fiber Reinforced Plastic Planning Hull?. Appl. Sci., 10.10.3390/app10186557 ↗
10. Troncossi, M., Taddia, S., Rivola, A., and Martini, A. (2020). Experimental Characterization of a High-Damping Viscoelastic Material Enclosed in Carbon Fiber Reinforced Polymer Components. Appl. Sci., 10.10.3390/app10186193 ↗
11. Han, Z., Jeong, S., Noh, J., and Oh, D. (2020). Comparative Study of Glass Fiber Content Measurement Methods for Inspecting Fabrication Quality of Composite Ship Structures. Appl. Sci., 10.10.3390/app10155130 ↗
12. Wang, Y., Zhang, W., Ren, H., Huang, Z., Geng, F., Li, Y., and Zhu, Z. (2020). An Analytical Model for the Tension-Shear Coupling of Woven Fabrics with Different Weave Patterns under Large Shear Deformation. Appl. Sci., 10.10.3390/app10041551 ↗
13. Magalhães, G.M.C., Fragassa, C., Lemos, R.L., Isoldi, L.A., Amico, S.C., Rocha, L.A.O., Souza, J.A., and dos Santos, E.D. (2020). Numerical Analysis of the Influence of Empty Channels Design on Performance of Resin Flow in a Porous Plate. Appl. Sci., 10.10.3390/app10114054 ↗
14. Falaschetti, M.P., Rondina, F., Zavatta, N., Gragnani, L., Gironi, M., Troiani, E., and Donati, L. (2020). Material Characterization for Reliable Resin Transfer Molding Process Simulation. Appl. Sci., 10.10.3390/app10051814 ↗
15. FE analysis and production experience of a sandwich structure component manufactured by means of vacuum assisted resin infusion process10.1016/j.compositesb.2013.04.064 ↗
16. Development of full carbon wheels for sport cars with high-volume technology10.1016/j.compstruct.2018.02.083 ↗
17. Fabrication, process simulation and testing of a thick CFRP component using the RTM process10.1016/j.compositesb.2013.08.088 ↗
18. Lai, L., Li, H., Sun, Y., Ding, G., Wang, H., and Yang, Z. (2019). Investigation of Electrodeposition External Conditions on Morphology and Texture of Ni/SiCw Composite Coatings. Appl. Sci., 9.10.3390/app9183824 ↗
19. Chen, X., Li, X., Wu, C., Ma, Y., Zhang, Y., Huang, L., and Liu, W. (2019). Optimization of Processing Parameters for Water-Jet-Assisted Laser Etching of Polycrystalline Silicon. Appl. Sci., 9.10.3390/app9091882 ↗
20. Pavlovic, A., Sintoni, D., Fragassa, C., and Minak, G. (2020). Multi-Objective Design Optimization of the Reinforced Composite Roof in a Solar Vehicle. Appl. Sci., 10.10.3390/app10082665 ↗
21. A Brief Review on Determinant Aspects in Energy Efficient Solar Car Design and Manufacturing10.1007/978-3-319-57078-5_79 ↗
22. Structural Design and Manufacturing of a Cruiser Class Solar Vehicle
23. On the structural behaviour of a CFRP safety cage in a solar powered electric vehicle10.1016/j.compstruct.2020.112698 ↗
24. On the modal behaviour of ultralight composite sandwich automotive panels10.1016/j.compstruct.2020.112523 ↗
25. Minak, G., Brugo, T.M., and Fragassa, C. (2019). Ultra-High-Molecular-Weight Polyethylene Rods as an Effective Design Solution for the Suspensions of a Cruiser-Class Solar Vehicle. Int. J. Pol. Sci., 8317093.10.1155/2019/8317093 ↗