Selected Properties of Overlaid Magnesium Based Composite Panels for Flooring
Source abstract
Abstract
The objective of this work was to evaluate some of the mechanical and physical properties of the flooring materials manufactured from panels having magnesia substrate overlaid with oak veneer (Querqus alba) and linoleum sheets. Commercially manufactured panels were used in this work. Bending characteristics, internal bond strength, thickness swelling, and surface quality of the samples were evaluated. The highest modulus of elasticity (MOE) value of 4406 MPa for the sample type-A2 was loaded in the direction of the substrate followed by 3478 MPa for linoleum covered samples which were loaded in the same direction. Internal bond strength values of the panels did not show any significant differences from each other. Dimensional stability of the specimens in the form of thickness swelling for both 2-h and 24-h water soaking tests resulted in values ranging from 0.11 to 0.19%. The surface quality of the samples was not substantially influenced as a function of water exposure. Based on the results in this work magnesium substrate overlaid with oak veneer and linoleum panels could have potential to be used as flooring material with accepted properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Materials Engineering and Processing · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Environmental Engineering, Near East University, Near East Blvd, Mersin 10, Turkey
Department of Civil Engineering, Near East University, Near East Blvd, Mersin 10, Turkey
Department of Natural Resource Ecology and Management, Oklahoma State University, Stillwater, OK 74078, USA
Faculty of Art and Science, Department of Geography, Near East University, Near East Blvd, Mersin 10, Turkey
References (21)
Show source-provided references
1. Évaluation of surface characteristics of laminated flooring
2. Some properties of linoleum and wood laminated flooring Panels with magnesium substrate10.15376/biores.10.1.1667-1674 ↗
3. Hiziroglu, S. (2008). Laminated veneer lumber (LVL) as a construction material. Food and Agricultural Products Center (FAPC) Fact Sheet-163, Available online: https://extension.okstate.edu/fact-sheets/laminated-veneer-lumber-lvl-as-a-construction-material.html.
4. Effect of press closing time and target thickness on surface roughness of particleboard
5. Mechanical and optical properties of clay-based nanocomposites coating for flooring10.1016/j.porgcoat.2009.12.011 ↗
6. Surface roughness analysis of wood composites: A stylus method
7. Magnesium based phosphate cement binder for composite panels: A response surface methodology for optimization of processing variables in boards produced from agricultural and wood processing industrial residual10.1016/j.indcrop.2016.09.051 ↗
8. Lojka, M., Jankosky, O., Jihckova, A., Lauermannova, A., Antoncik, F., Sedmidubsky, D., Pavlik, Z., and Pavlikova, M. (2020). Thermal stability and kinetics of formulation of magnesium oxychloride phase 3Mg(OH)2MgCl2 8H2O. Materials, 13.10.3390/ma13030767 ↗
9. Synergistic effect of curing conditions and magnesium oxide addition on the physico-mechanical properties and firing resistivity of Portland cement mortar10.1016/j.conbuildmat.2018.05.092 ↗
10. Experimental investigation on properties and microstructure of magnesium oxychoride cement prepared with caustic magnesite and dolomite10.1016/j.conbuildmat.2015.01.056 ↗
11. ASTM-D-1037 (1999). Method D.1037. Evaluating the Properties of Wood Based Fiber and Particle Panel Material, American Society for Testing and Materials (ASTM).
12. Mummery, L. (1993). Surface Texture Analysis. The Handbook, Hommelwerke.
13. On the tribological behavior of retrieved hip femoral heads affected by metallic debris. A comparative investigation by stylus and optical profilometer for a new roughness measurement protocol10.1016/j.measurement.2016.05.003 ↗
14. Particleboard manufacture from Eastern Redcedar
15. The resistance to high temperature of magnesia phosphate cement paste containing wallastonite
16. Behavior of glued fiber composite sandwich structure in flexure: Experiment and fiber model analysis10.1016/j.matdes.2012.02.052 ↗
17. New fabricated elements of lightened plaster used for partitions10.1016/j.conbuildmat.2004.07.002 ↗
18. Axial load behavior of profiled composite walls10.1023/A:1005279808658 ↗
19. Influence of curing regimes on mechanical properties of magnesium oxychloride cement based composites10.1016/j.conbuildmat.2015.10.205 ↗
20. Cement-bonded particleboard with a mixture of wheat straw and poplar wood
21. ANSI (1985). Surface Texture Surface Roughness, Waviness and Lay. B46.1, The American society of Mechanical Engineers.