Development and Performance Evaluation of Eco-Friendly POSS-Containing MQL Oil Coolant for Drilling Processes
Source abstract
Abstract
Drilling work on Inconel, a well-known super-heat-resistant alloy, requires a significant quantity of cutting oil to prevent heat-induced abrasion and damage to the cutting tool, caused by the strength and toughness of the alloy. This high requirement of cutting oil, however, negatively affects the processing environment; therefore, minimum-quantity lubrication (MQL), an eco-friendly cutting-oil-supply method, is attracting attention. The conventional MQL method, however, has the disadvantage that an oil-mist is produced along with high-pressure air; hence, the mist is scattered in the air, making the application of the oil to the cutting point inefficient and rendering the cooling effect to be less than that in wet processing. In this study, therefore, an eco-friendly compound, polyhedral oligomeric silsesquioxane (POSS)—a nanostructured organic–inorganic hybrid material that exhibits better adhesion to materials than conventional MQL-specific oil and is resistant to the heat generated during drilling—was developed by adding POSS to the conventional MQL-specific oil, and the effects were verified.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Metal and Thin Film Mechanics · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Changwon National University, 20 Changwondae-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do 51140, Korea
Department of Chemistry, Changwon National University, 20 Changwondae-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do 51140, Korea
Funding
National Research Foundation of Korea
References (24)
Show source-provided references
1. Machinability of nickel-base super alloys: A general review10.1016/S0924-0136(97)00429-9 ↗
2. The machinability of Inconel 71810.1016/S0924-0136(96)02624-6 ↗
3. The effect of coating material and geometry of cutting tool and cutting speed on machinability properties of Inconel 718 super alloys10.1016/j.matdes.2006.03.003 ↗
4. Optimization of machining parameters for end milling of Inconel 718 super alloy using Taguchi based grey relational analysis10.1016/j.proeng.2013.09.208 ↗
5. Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools10.1007/s00170-013-5206-4 ↗
6. Saw-tooth chip formation and its effect on cutting force fluctuation in turning of Inconel 71810.1007/s12541-013-0126-7 ↗
7. The effects of tool edge radius on drill deflection and hole misalignment in deep hole gundrilling of Inconel-71810.1016/j.cirp.2014.03.075 ↗
8. Ultrasonic assisted deep drilling of Inconel 738LC superalloy10.1016/j.procir.2013.03.096 ↗
9. Machining induced surface integrity in titanium and nickel alloys: A review10.1016/j.ijmachtools.2010.11.003 ↗
10. Thermal aspects in deep hole drilling of aluminium cast alloy using twist drills and MQL10.1016/j.procir.2012.07.043 ↗
11. Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining10.1007/s00170-014-5683-0 ↗
12. Minimum quantity lubrication (MQL) in automotive powertrain machining10.1016/j.procir.2014.03.044 ↗
13. The effects of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress10.1007/s12541-014-0612-6 ↗
14. Tool wear performance in face milling Inconel 182 using minimum quantity lubrication with different nozzle positions10.1007/s12541-014-0371-4 ↗
15. Tool wear analysis on coated and uncoated carbide tools in Inconel machining10.1007/s12541-015-0215-x ↗
16. Machining evaluation of a hybrid MQL-CO 2 grinding technology10.1016/j.jclepro.2010.07.002 ↗
17. Applications of advanced hybrid organic–inorganic nanomaterials: From laboratory to market10.1039/c0cs00136h ↗
18. Design, synthesis, and properties of inorganic and hybrid thin films having periodically organized nanoporosity10.1021/cm702100t ↗
19. A novel polyhedral oligomeric silsesquioxane-modified layered double hydroxide: Preparation, characterization and properties10.3762/bjnano.9.284 ↗
20. Dudziec, B., Żak, P., and Marciniec, B. (2019). Synthetic Routes to Silsesquioxane-Based Systems as Photoactive Materials and Their Precursors. Polymers, 11.10.3390/polym11030504 ↗
21. New, effective method of synthesis and structural characterization of octakis (3-chloropropyl) octasilsesquioxane10.1021/om700962x ↗
22. POSS-based luminescent hybrid material for enhanced photo-emitting properties10.1007/s10853-013-7568-2 ↗
23. Synthesis of POSS Derived Organic-Inorganic Hybrid Esters for Insulating Oil Applications10.5012/bkcs.2014.35.9.2769 ↗
24. Efficient MQL-based Drilling of Inconel 60110.14775/ksmpe.2018.17.4.001 ↗