Granular activated carbons from palm nut shells for gold di-cyanide adsorption
Source abstract
Abstract
Granular activated carbons were produced from palm nut shells by physical activation with steam. The proximate analysis of palm nut shells was investigated by thermogravimetric analysis, and the adsorption capacity of the activated carbons, produced as a result of shell pyrolysis at 600°C followed by steam activation at 900°C in varying activation times, was evaluated using nitrogen adsorption at 77 K. Applicability of the activated carbons for gold dicyanide adsorption was also investigated. Increasing the activation hold time with the attendant increase in the degree of carbon burn-off results in a progressive increase in the surface area of the activated carbons, reaching a value of 903.1 m2/g after activation for 6 h. The volumes of total pores, micropores, and mesopores in the activated carbons also increase progressively with the increasing degree of carbon burn-off, resulting from increasing the activation hold time. The gold di-cyanide adsorption of the activated carbons increases with the rise of pore volume of the activated carbons. The gold di-cyanide adsorption of palm nut shell activated carbon obtained after 6-h activation at 900°C is superior to that of a commercial activated carbon used for gold di-cyanide adsorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cassava research and cyanide · Adsorption and biosorption for pollutant removal · Clay minerals and soil interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. L.R.P. de Andrade Lima and D. Hodouin, Optimization of reactor volumes for gold cyanidation, Miner. Eng., 18(2005), No. 7, p. 671.10.1016/j.mineng.2004.12.007 ↗
2. L.R.P. de Andrade Lima and D. Hodouin, D., Analysis of the gold recovery profile through a cyanidation plant, Int. J. Miner. Process., 80(2006), No. 1, p. 15.10.1016/j.minpro.2006.01.002 ↗
3. M.A. Kononova, N.V. Vorob’ev-Desyatovskii, R.I. Ibragimova, and S.A. Kubyshkin, Effect of inorganic compounds in the activated carbon phase and in solution on the adsorption of gold (I) cyanide complex, Russ. J. Appl. Chem., 82(2009), No. 2, p. 173.10.1134/S1070427209020013 ↗
4. M. Soleimani and T. Kaghazchi, Activated hard shell of apricot stones: A promising adsorbent in gold recovery, Chin. J. Chem. Eng., 16(2008), No. 1, p. 112.10.1016/S1004-9541(08)60048-8 ↗
5. A.C. Lua and J. Guo, Preparation and characterization of activated carbons from oil-palm stones for gas phase adsorption, Colloids Surf., A, 179(2001), No. 2–3, p. 151.10.1016/S0927-7757(00)00651-8 ↗
6. W.K. Buah, A.M. Cunliffe, and P.T. Williams, Characterization of products from the pyrolysis of municipal solid waste, Process Saf. Environ. Prot., 85(2007), No. 5, p. 450.10.1205/psep07024 ↗
7. M. Yalcin and A.I. Arol, Gold cyanide adsorption characteristics of activated carbon of non-coconut shell origin, Hydrometallurgy, 63(2002), No. 2, p. 201.10.1016/S0304-386X(01)00203-1 ↗
8. J. Marsden and I. House, The Chemistry of Gold Extraction, Ellis Horwood, New York, 1992, p. 597.
9. S.J. Gregg and K.S.W. Sing, Adsorption, Surface Area and Porosity, Academic Press, London, 1991.
10. R.G. Jordi, B.D. Young, and A.W. Bryson, Gold adsorption on activated carbon and the effect of suspended solids and dissolved silicon dioxide, Chem. Eng. Commun., 102(1991), No. 1, p. 127.10.1080/00986449108910853 ↗
11. F.E. Ahmed, B.D. Young, and A.W. Bryson, Comparison and modelling of the adsorption kinetics of gold cyanide onto activated carbon and resin in a silica slurry, Hydrometallurgy, 30(1992), p. 257.10.1016/0304-386X(92)90088-H ↗
12. C. Bouchelta, M.S. Medjram, O. Bertrand, and J.P. Bellat, Preparation and characterization of activated carbon from date stones by physical activation with steam, J. Anal. Appl. Pyrolysis, 82(2008), No. 1, p. 70.10.1016/j.jaap.2007.12.009 ↗
13. H. Teng and S.C. Wang, Preparation of porous carbons from phenol-formaldehyde resins with chemical and physical activation, Carbon, 38(2000), No. 6, p. 817.10.1016/S0008-6223(99)00160-8 ↗
14. D. Mohan, K.P. Singh, and V.K. Singh, Wastewater treatment using low cost activated carbons derived from agricultural byproducts: a case study, J. Hazard. Mater., 152(2008), No. 3, p. 1045.10.1016/j.jhazmat.2007.07.079 ↗
15. W.M.A.W. Daud and W.S.W. Ali, Comparison on pore development of activated carbon produced from palm shell and coconut shell, Bioresour. Technol., 93(2004), No. 1, p. 63.10.1016/j.biortech.2003.09.015 ↗
16. J. Laine and S. Yunes, Effect of the preparation method on the pore size distribution of activated carbon from coconut shell, Carbon, 30(1992), No. 4, p. 601.10.1016/0008-6223(92)90178-Y ↗
17. Z.H. Hu, M.P. Srinivasan, and Y.M. Ni, Novel activation process for preparing highly microporous and mesoporous activated carbons, Carbon, 39(2001), No. 6, p. 877.10.1016/S0008-6223(00)00198-6 ↗
18. P. Ariyadejwanich, W. Tanthapanichakoon, K. Nakagawa, S.R. Mukai, and H. Tamon, Preparation and characterization of mesoporous activated carbon from waste tires, Carbon, 41(2003), No. 1, p. 157.10.1016/S0008-6223(02)00267-1 ↗
19. R.C. Bansal, J.B. Donnet, and F. Stoeckli, Active Carbon, Marcel Dekker, New York, 1988.
20. W. Su, L. Zhou, and Y.P. Zhou, Preparation of microporous activated carbon from coconut shells without activating agents, Carbon, 41(2003), No. 4, p. 861.10.1016/S0008-6223(03)00003-4 ↗
21. O.W. Achaw and G. Afrane, The evolution of the pore structure of coconut shells during the preparation of coconut shell-based activated carbons, Microporous Mesoporous Mater., 112(2008), No. 1–3, p. 284.10.1016/j.micromeso.2007.10.001 ↗
22. K.S.W. Sing, D.H. Everett, R.A.W. Haul, L. Moscou, R.A. Pierotti, J. Rouquerol, and T. Siemieniewska, Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity, Pure Appl. Chem., 57(1985), No. 4, p. 603.10.1351/pac198557040603 ↗
23. R. Francoise, R. Jean, and S. Kenneth, Adsorption by Powders and Porous Solids: Principals, Methodology and Applications, Academic Press, London, 1999.
24. F. Rodríguez-reinoso, The role of carbon materials in heterogeneous catalysis, Carbon, 36(1998), No. 3, p. 159.10.1016/S0008-6223(97)00173-5 ↗
25. F. Stoeckli and L. Ballarini, Evolution of microporosity during activation of carbon, Fuel, 70(1991), No. 4, p. 557.10.1016/0016-2361(91)90036-A ↗
26. W.M.A.W. Daud, W.S.W. Ali, and M.Z. Sulaiman, The effects of carbonization temperature on pore development in palm-shell-based activated carbon, Carbon, 38(2000), No. 14, p. 1925.10.1016/S0008-6223(00)00028-2 ↗
27. Calgon Test Method 53, Determination of Gold Adsorptive Capacity (K-value) of Activated Carbon, Calgon Carbon Corporation, Pittsburgh, 1983.
28. A.J. Shipman, Laboratory Methods for the Testing of Activated Carbon for Use in Carbon in Pulp Plants for the Recovery of Gold, Mintek Communication MC1, Mintek Corporation, South Africa, 1994.
29. M.D. Adams, Influence of the surface chemistry and structure of activated carbon on the adsorption of aurocyanide, [in] 18th International Mineral Processing Congress, Sydney, 1993, p. 1175.