Special Issue on Manufacturing Metrology
Source abstract
Abstract
Metrology is the science of measurement and can be divided into three overlapping activities: (1) the definition of units of measurement, (2) the realization of units of measurement, and (3) the traceability of measurement units [...]
Only a short abstract or summary was supplied by the source.
Source: crossref · Quality: short
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced machining processes and optimization · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Dalian University of Technology, 2 Linggong Rd., Dalian 116023, China
Department of Mechanical Engineering, National Taiwan University, 1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan
Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough LE11 3TU, UK
References (25)
Show source-provided references
1. Gao, H., Wang, Z., Cheng, Y., Li, Y., Sun, S., and Shang, Z. (2019). A practical positioning method in end-plate surface distance measurement with Nano-meter precision. Appl. Sci., 9.10.3390/app9224970 ↗
2. Lu, Z., Zhang, B., Li, Z., and Zhao, C. (2020). A method of on-site describing the positional relation between two horizontal parallel surfaces and two vertical parallel surfaces. Appl. Sci., 10.10.3390/app10062152 ↗
3. Ren, G., Qu, X., and Chen, X. (2020). A new computational model of step gauge calibration based on the synthesis technology of multi-path laser interferometers. Appl. Sci., 10.10.3390/app10062089 ↗
4. Shih, Y., Tung, P., Jywe, W., Chang, C., Shyu, L., and Hsieh, T. (2020). Investigation on the differential quadrature Fabry–Pérot interferometer with variable measurement mirrors. Appl. Sci., 10.10.3390/app10186191 ↗
5. Liu, Z., Duan, F., Niu, G., Ma, L., Jiang, J., and Fu, X. (2020). An improved Circumferential Fourier Fit (CFF) method for blade tip timing measurements. Appl. Sci., 10.10.3390/app10113675 ↗
6. Nan, Z., Tao, W., Zhao, H., and Lv, N. (2020). A fast laser adjustment-based laser triangulation displacement sensor for dynamic measurement of a dispensing robot. Appl. Sci., 10.10.3390/app10217412 ↗
7. Kim, W., Fu, H., Lee, K., Han, S., Jang, Y., and Kim, S. (2020). Photonic microwave distance interferometry using a mode-locked laser with systematic error correction. Appl. Sci., 10.10.3390/app10217649 ↗
8. Cheng, F., Zou, J., Su, H., Wang, Y., and Yu, Q. (2020). A differential measurement system for surface topography based on a modular design. Appl. Sci., 10.10.3390/app10041536 ↗
9. Cheng, F., Fu, S., and Chen, Z. (2020). Surface texture measurement on complex geometry using dual-scan positioning strategy. Appl. Sci., 10.10.3390/app10238418 ↗
10. Shi, G., Zheng, L., Wang, W., and Lu, K. (2020). Non-scanning three-dimensional imaging system with a single-pixel detector: Simulation and experimental study. Appl. Sci., 10.10.3390/app10093100 ↗
11. Li, X., and Shi, Z. (2020). A form-free and high-precision metrological method for the twist of aeroengine blade. Appl. Sci., 10.10.3390/app10124130 ↗
12. Chen, Y., Liang, X., Ye, Z., and Hsu, Q. (2020). Development of a rapid optical measurement system for circular workpieces with irregular tooth contours after broaching process. Appl. Sci., 10.10.3390/app10134418 ↗
13. Chen, C., Shimizu, Y., Sato, R., Matsukuma, H., and Gao, W. (2020). An off-axis differential method for improvement of a femtosecond laser differential chromatic confocal probe. Appl. Sci., 10.10.3390/app10207235 ↗
14. Hovell, T., Petzing, J., Justham, L., and Kinnell, P. (2020). From light to displacement: A design framework for Optimising spectral-domain low-coherence interferometric sensors for in situ measurement. Appl. Sci., 10.10.3390/app10238590 ↗
15. Wang, J., Zhao, Q., Zhang, C., Guo, B., and Yuan, J. (2020). On-machine precision form truing and in-situ measurement of resin-bonded spherical diamond wheel. Appl. Sci., 10.10.3390/app10041483 ↗
16. Zhang, K., Cai, Y., Shimizu, Y., Matsukuma, H., and Gao, W. (2020). High-precision cutting edge radius measurement of single point diamond tools using an atomic force microscope and a reverse cutting-edge artifact. Appl. Sci., 10.10.3390/app10144799 ↗
17. Bian, X., Cui, J., Lu, Y., Zhao, Y., Cheng, Z., and Tan, J. (2020). Quantitative investigation of surface charge distribution and point probing characteristics of spherical scattering electrical field probe for precision measurement of miniature internal structures with high aspect ratios. Appl. Sci., 10.10.3390/app10155268 ↗
18. Li, Q., Shimizu, Y., Saito, T., Matsukuma, H., and Gao, W. (2020). Measurement uncertainty analysis of a stitching linear-scan method for the evaluation of roundness of small cylinders. Appl. Sci., 10.10.3390/app10144750 ↗
19. Chen, C., Li, J., Liao, W., Ciou, Y., and Chen, C. (2021). Dynamic pad surface metrology monitoring by swing-arm chromatic confocal system. Appl. Sci., 11.10.3390/app11010179 ↗
20. Chen, S., Kang, C., and Perng, D. (2020). Detecting and measuring defects in wafer die using GAN and YOLOv3. Appl. Sci., 10.10.3390/app10238725 ↗
21. Huang, Y., Fan, Y., Lou, Z., Fan, K., and Sun, W. (2020). An innovative dual-axis precision level based on light transmission and refraction for angle measurement. Appl. Sci., 10.10.3390/app10176019 ↗
22. Yao, Y., Nishizawa, K., Kato, N., Tsutsumi, M., and Nakamoto, K. (2020). Identification method of geometric deviations for multi-tasking machine tools considering the squareness of translational axes. Appl. Sci., 10.10.3390/app10051811 ↗
23. Shimizu, Y., Matsukuma, H., and Gao, W. (2020). Optical angle sensor technology based on the optical frequency comb laser. Appl. Sci., 10.10.3390/app10114047 ↗
24. Interlaboratory empirical reproducibility study based on a GD&T benchmark10.3390/app10144704 ↗
25. Lu, Y., Cui, J., Tan, J., and Bian, X. (2020). Quick response circulating water cooling of ±3 mK using dynamic thermal filtering. Appl. Sci., 10.10.3390/app10165483 ↗