Determination of the Operating Temperature of the Gas-Insulated Transmission Line
Source abstract
Abstract
Gas-insulated lines (GILs) have been increasingly used as high-current busducts for high-power transmission. Temperature is one of the most important factors affecting the performance and ampacity of GILs. In this paper, an analytical method was proposed to determine the temperature of a three-phase high-current busduct in the form of a single pole GIL. First, power losses in the phase conductors and enclosures were determined analytically with the skin, and proximity effects were taken into account. The determined power losses were used as heat sources in thermal analysis. Considering the natural convection and radiation heat transfer effects, the heat balance equations on the surface of the phase conductors and the screens were established, respectively. Subsequently, the temperature of the phase conductors and the enclosures were determined. The validation of the proposed method was carried out using the finite element method and laboratory measurements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Thermal Analysis in Power Transmission · Lightning and Electromagnetic Phenomena · High voltage insulation and dielectric phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Automation, Electrical Engineering and Optoelectronics, Faculty of Electrical Engineering, Czestochowa University of Technology, Armii Krajowej 17, 42-200 Czestochowa, Poland
References (34)
Show source-provided references
1. Alter, J., Ammann, M., Boeck, W., Degen, W., Diessner, A., Koch, H., Renaud, F., and Poehler, S. (2002). N2/SF6 Gas-Insulated Line of a New GIL Generation in Service, CIGRE. CIGRE Session No. 39.
2. Solving for three phase conductively isolated busbar voltages using phase component analysis10.1109/59.373932 ↗
3. Effectiveness of optimization methods in heavy-current equipment designing
4. High-capability applications of long gas-insulated lines in structures10.1109/TPWRD.2006.887094 ↗
5. Solution of coupled electromagnetic and thermal problems in gas insulated transmission lines10.1109/TMAG.2003.810393 ↗
6. Proximity effect and magnetic field calculation in GIL and in isolated phase bus ducts10.1109/20.996202 ↗
7. CIGRE (2003). Gas Insulated Transmission Lines (GIL), CIGRE. TB 218.
8. CIGRE (2008). Application of Long High Capacity Gas Insulated Lines (GIL), CIGRE. TB 351.
9. Analysis of field and losses in a three phase gas cable with thick walls, part I field analysis10.1109/TPAS.1984.318247 ↗
10. Analysis of field and losses in a three phase gas cable with thick walls, part II calculation of losses and results10.1109/TPAS.1985.318851 ↗
11. Analytical calculation of the magnetic field produced by electric power lines10.1109/TPWRD.2004.839184 ↗
12. Analyses of the three-dimensional eddy current field and thermal problems in an isolated phase bus10.1109/TMAG.2003.810403 ↗
13. Calculations of eddy current, fluid and thermal fields in an air insulated bus duct system10.1109/TMAG.2007.892454 ↗
14. Electromagnetic-thermal scale model of gas-insulated bus bars
15. Analysis of electromagnetic and thermal fields for a bus duct system10.1016/S0378-7796(97)01220-0 ↗
16. Jajczyk, J., and Kasprzyk, L. (2008, January 20–22). The use of coupled temperature and electromagnetic fields in optimization problems. Proceedings of the 6th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (THE’08), Rhodes, Greece.
17. Calculation of the temperature rise in the gas insulated busbar by coupled magneto-thermal-fluid analysis10.5370/JEET.2009.4.4.510 ↗
18. Koch, H. (2012). Gas-Insulated Transmission Lines (GIL), John Wiley & Sons.10.1002/9781119953081 ↗
19. Gas-insulated transmission line (GIL) an overview
20. Koch, H. (2003, January 22–26). Experience with 2nd generation gas-insulated transmission lines GIL. Proceedings of the JICABLE 03, Versailles, France.
21. Finite element computation of field, forces and inductances in underground SF6 insulated cables using a coupled magneto-thermal formulation10.1109/20.305540 ↗
22. Finite element computation of field, losses and forces in a three-phase gas cable with non-symmetrical conductor arrangement10.1109/61.193927 ↗
23. Murusawa, I., Ichihara, M., Kawai, T., Miyazaki, A., and Takinami, N. (1995, January 11–15). Development of long-distance 275 kV gas insulated transmission line (GIL). Proceedings of the 11th International Conference on Gas Discharge and Their Applications, Tokio, Japan.
24. Piątek, Z. (2008). Impedances of Tubular High Current Busducts, Polish Academy of Sciences.
25. Self and mutual impedances of a finite length gas insulated transmission line (GIL)10.1016/j.epsr.2006.02.017 ↗
26. Discussion of “Insulation coordination for gas-insulated transmission lines (GIL)” and closure10.1109/61.956782 ↗
27. Numerical analysis of the magnetic field of high-current busduct and GIL systems10.3390/en4122196 ↗
28. Analytical calculation of coupled magnetothermal problem in gas insulated transmission lines
29. Power losses in a three-phase single-pole gas-insulated transmission line (GIL)
30. Insulation co-ordination for gas-insulated transmission lines (GIL)10.1109/61.905613 ↗
31. Thermal analysis in gas insulated transmission lines using an improved finite-element model
32. Mc Lachlan, N.W. (1964). Bessel Functions for Engineers, PWN. [2nd ed.]. (In Polish).
33. Hering, M. (1980). Termokinetics for Electricians, WNT. (In Polish).
34. Hilsenrath, J. (1955). Tables of Thermal Properties of Gases, NBS Circular.