Convergence-Related Serviceability Limit States of Segmental Tunnel Rings: Lessons Learned from Structural Analysis of Real-Scale Tests

An extended hybrid method for the analysis of the symmetric structural behavior of segmental tunnel linings is proposed. Their deformations cannot be determined by the traditional hybrid methods when the convergences are close to the serviceability limit states (SLSs). Two real-scale tests are employed for the validation of the proposed method. It involves structural analysis that is based on transfer relations. They represent analytical solutions of the linear theory of thin circular arches, and they contain the symmetric mode of rigid-body displacements. The method is termed hybrid because it is based on two types of input, namely the external loading and experimental data of displacements monitored during the test. It is termed extended because, additionally, the vertical and horizontal convergences are employed to produce more accurate structural deformations than obtained by the traditional hybrid method. The latter is found to be unsuitable for structural analysis after sudden failure has occurred in the vicinity of segmental interfaces. At the respective load steps, the structures were in convergence-related serviceability class C, referring to endangered serviceability. The local failures occurring at these load steps resulted in a rapid increase in the structural deformations and fast attainment of the SLS. If, in convergence-related serviceability class C, local failures at segmental interfaces are detected, the strengthening of the structure is necessary. This cannot be delayed to the attainment of serviceability class D, i.e., to reaching the SLS.