Mechanical Behaviors and Numerical Simulation Analysis of a New Isolation System
Source abstract
Abstract
Finite element analysis is one of the key steps in evaluating the effectiveness of an isolation system. The aim of this paper is to research the mechanical properties of sliding and rolling friction systems and their application for isolating frame structures. A hybrid seismic isolation system is proposed, which aims to protect the superstructure by reducing dynamic response. The effect of different parameters on the friction coefficient of the isolation bearing was tested using a compression-shear testing machine, and the results showed that various parameters significantly affected the friction coefficient. In addition, a numerical analysis finite element model was established using SAP2000 software to compare the seismic isolation performance of the hybrid isolation system with that of traditional seismic-resistant structures. The results showed that the composite isolation system not only effectively reduced inter-story shear and acceleration, but also slightly enhanced the seismic isolation effect as the friction coefficient decreased.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Seismic Performance and Analysis · Vibration Control and Rheological Fluids · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
School of Architectural Engineering, North China University of Science and Technology, Tangshan 063210, China
References (21)
Show source-provided references
1. CNIPA (2022). A New type of Friction damping isolated Rubber Bearing. Rubber Sci. Technol., 20, 515. (In Chinese).
2. Zhang, Q., Sang, G.R., and Li, S.S. (2022). Analysis on Damping effect of laminated rubber cushion foundation isolation Structure. Jiangxi Build. Mater., 290–291. (In Chinese).
3. Huang, Z.S. (2022). Study on the Stability of Three Dimensional Vibration Isolation Rubber Bearing, Guangzhou University. (In Chinese).
4. Theoretical prediction of the dynamic behavior of rolling-ball rubber-layer isolation systems10.1002/stc.1830 ↗
5. Multi-level SMA/lead rubber bearing isolation system for seismic protection of bridges10.1088/1361-665X/ab802b ↗
6. Review on the influence of temperature on rubber isolation bearing
7. Research on equivalent Linearization parameters and isolation design method of Friction pendulum Bearing
8. On the performance of double rolling isolation systems10.1016/j.jsv.2019.02.030 ↗
9. Full scale dynamic testing of a sliding seismically isolated unibody house
10. Vertical Accelerations in Rolling Isolation Systems: Experiments and Simulations
11. Zhang, H. (2018). Experimental Study on Friction Performance of Rolling Isolation Bearing, North China University of Science and Technology.
12. Seismic performance analysis of a large-scale single-layer lattice dome with a hybrid three-directional seismic isolation system10.1016/j.engstruct.2020.110627 ↗
13. Multi-Directional Base Isolation System for Coupled Horizontal and Vertical Seismic Excitations10.1080/13632469.2020.1713925 ↗
14. Jing, X.G. (2021). Nonlinear Mechanical Properties Analysis and Experimental Study of Series Isolation Components, Hebei University of Engineering. (In Chinese).
15. Experimental study on Series laminated Rubber bearing with variable Stiffness
16. Shaking table test study on the seismic isolation effect of a hybrid passive control System10.1016/j.measurement.2020.108125 ↗
17. Effect of Friction Pressure Ratio on Isolation Performance of Parallel Composite Isolation System
18. Seismic vulnerability analysis of series isolation structural system
19. The impact of the concave distribution of rolling friction coefficient on the seismic isolation performance of a spring-rolling system10.1016/j.ijnonlinmec.2016.04.001 ↗
20. Gao, J.Y. (2018). Research on Disc Spring-High Damping Rubber Isolation Bearing, Beijing University of Technology. (In Chinese).
21. Experimental study on mechanical properties of disc-spring-stacked rubber three-dimensional composite vibration isolation bearings