Evaluation of piezoelectric energy harvester under dynamic bending by means of hybrid mathematical/isogeometric analysis
Source abstract
Abstract
In this paper, a novel hybrid mathematical/isogeometric analysis (IGA) scheme is implemented to evaluate the energy harvesting of the piezoelectric composite plate under dynamic bending. The NURBS-based IGA is applied to obtain the structural response exerted by the mechanical loading. The dynamic responses conveniently coupled with the governing voltage differential equations to estimate the energy harvested. The capabilities of the scheme are shown with the comparison against analytical and full electromechanical finite element results. As there is no need of fully coupled electromechanical element, the scheme provides cheaper computational cost and could be implemented with standard computational software. Thus, it gives great benefit for early design stage. Moreover, the robustness of the scheme is shown by the couple with high order IGA element which has been proven less prone to the shear locking phenomena in the literature. The computational results show greater accuracy on structural responses and energy estimation for a very thin plate compared to the couple with standard finite element method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Railway Engineering and Dynamics · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Abdelkefi, A.: Aeroelastic energy harvesting: a review. Int. J. Eng. Sci. 100, 112–135 (2016)10.1016/j.ijengsci.2015.10.006 ↗
2. Akbar, M., Curiel-Sosa, J.: Piezoelectric energy harvester composite under dynamic bending with implementation to aircraft wingbox structure. Compos. Struct. 153, 193–203 (2016)10.1016/j.compstruct.2016.06.010 ↗
3. Allik, H., Hughes, T.J.R.: Finite element method for piezoelectric vibration. Int. J. Num. Methods Eng. 2(2), 151–157 (1970)10.1002/nme.1620020202 ↗
4. Ballas, R.G.: Piezoelectric Multilayer Beam Bending Actuators: Static and Dynamic Behavior and Aspects of Sensor Integration. Microtechnology and MEMS. Springer, Berlin (2007)
5. Barbero, E.J.: Finite Element Analysis of Composite Materials. CRC Press, Boca Raton (2008)
6. Bazilevs, Y., Calo, V.M., Hughes, T.J.R., Zhang, Y.: Isogeometric fluid-structure interaction: theory, algorithms, and computations. Comput. Mech. 43(1), 3–37 (2008)10.1007/s00466-008-0315-x ↗
7. Benjeddou, A.: Advances in piezoelectric finite element modeling of adaptive structural elements: a survey. Comput. Struct. 76(1), 347–363 (2000)10.1016/S0045-7949(99)00151-0 ↗
8. Bruni, C., Gibert, J., Frulla, G., Cestino, E., Marzocca, P.: Energy harvesting from aeroelastic vibrations induced by discrete gust loads. J. Intell. Mater. Syst. Struct. 28(1), 47–62 (2017)10.1177/1045389X16642533 ↗
9. Bui, T.Q.: Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using NURBS. Comput. Methods Appl. Mech. Eng. 295, 470–509 (2015)10.1016/j.cma.2015.07.005 ↗
10. Bui, T.Q., Nguyen, M.N., Zhang, C., Pham, D.A.K.: An efficient meshfree method for analysis of two-dimensional piezoelectric structures. Smart Mater. Struct. 20(6), 065,016 (2011)10.1088/0964-1726/20/6/065016 ↗
11. Bui, T.Q., Hirose, S., Zhang, C., Rabczuk, T., Wu, C.T., Saitoh, T., Lei, J.: Extended isogeometric analysis for dynamic fracture in multiphase piezoelectric/piezomagnetic composites. Mech. Mater. 97, 135–163 (2016a)10.1016/j.mechmat.2016.03.001 ↗
12. Bui, T.Q., Nguyen, D.D., Zhang, X., Hirose, S., Batra, R.C.: Analysis of 2-dimensional transient problems for linear elastic and piezoelectric structures using the consecutive-interpolation quadrilateral element (CQ4). Eur. J. Mech. A Solid 58, 112–130 (2016b)10.1016/j.euromechsol.2016.01.010 ↗
13. Collier, N., Pardo, D., Dalcin, L., Paszynski, M., Calo, V.: The cost of continuity: a study of the performance of isogeometric finite elements using direct solvers. Comput. Methods Appl. Mech. Eng. 213–216, 353–361 (2012)10.1016/j.cma.2011.11.002 ↗
14. Cottrell, J., Reali, A., Bazilevs, Y., Hughes, T.: Isogeometric analysis of structural vibrations. Comput. Methods Appl. Mech. Eng. 195(41), 5257–5296 (2006). John H. Argyris Memorial Issue. Part II10.1016/j.cma.2005.09.027 ↗
15. De Marqui Jr, C., Maria, M.J.: Effect of piezoelectric energy harvesting on the response of a generator wing to a turbulence gust. In: 27th Congress of the International Council of The Aeronautical Sciences (2010)
16. De Marqui, J.C., Erturk, A., Inman, D.J.: An electromechanical finite element model for piezoelectric energy harvester plates. J. Sound Vib. 327(1), 9–25 (2009)10.1016/j.jsv.2009.05.015 ↗
17. Erturk, A., Inman, D.J.: A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. J. Vib. Acoust. 130(4), 041,002 (2008)10.1115/1.2890402 ↗
18. Erturk, A., Inman, D.J.: An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater. Struct. 18(2), 025,009 (2009)10.1088/0964-1726/18/2/025009 ↗
19. Erturk, A., Inman, D.J.: Piezoelectric Energy Harvesting. Wiley, New York (2011)10.1002/9781119991151 ↗
20. Erturk, A., Vieira, W.G.R., De Marqui, J.C., Inman, D.J.: On the energy harvesting potential of piezoaeroelastic systems. Appl. Phys. Lett. 96(18), 184103 (2010)10.1063/1.3427405 ↗
21. Evans, J.A., Bazilevs, Y., Babuka, I., Hughes, T.J.: n-widths, supinfs, and optimality ratios for the k-version of the isogeometric finite element method. Comput. Methods Appl. Mech. Eng. 198(21), 1726–1741 (2009). Advances in Simulation-Based Engineering Sciences Honoring J. Tinsley Oden10.1016/j.cma.2009.01.021 ↗
22. Fischer, P., Klassen, M., Mergheim, J., Steinmann, P., Müller, R.: Isogeometric analysis of 2D gradient elasticity. Comput. Mech. 47(3), 325–334 (2011)10.1007/s00466-010-0543-8 ↗
23. Hammami, W., Padmanabhan, R., Oliveira, M.C., BelHadjSalah, H., Alves, J.L., Menezes, L.F.: A deformation based blank design method for formed parts. Int. J. Mech. Mater. Des. 5(4), 303 (2009)10.1007/s10999-009-9103-9 ↗
24. Hughes, T., Cottrell, J., Bazilevs, Y.: Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Comput. Methods Appl. Mech. Eng. 194(3941), 4135–4195 (2005)10.1016/j.cma.2004.10.008 ↗
25. Khakalo, S., Niiranen, J.: Isogeometric analysis of higher-order gradient elasticity by user elements of a commercial finite element software. Comput. Aided Des. 82, 154–169 (2017)10.1016/j.cad.2016.08.005 ↗
26. Kwon, Y., Bang, H.: The Finite Element Method Using MATLAB. Mechanical and Aerospace Engineering Series, 2nd edn. CRC Press, Boca Raton (2000)
27. Lai, W., Yu, T., Bui, T.Q., Wang, Z., Curiel-Sosa, J.L., Das, R., Hirose, S.: 3-D elasto-plastic large deformations: IGA simulation by Bezier extraction of NURBS. Adv. Eng. Softw. 108, 68–82 (2017a)10.1016/j.advengsoft.2017.02.011 ↗
28. Lai, Y., Zhang, Y.J., Liu, L., Wei, X., Fang, E., Lua, J.: Integrating CAD with Abaqus: a practical isogeometric analysis software platform for industrial applications. Comput. Math. Appl. 74(7), 1648–1660 (2017b)10.1016/j.camwa.2017.03.032 ↗
29. Li, D., Wu, Y., Ronch, A.D., Xiang, J.: Energy harvesting by means of flow-induced vibrations on aerospace vehicles. Prog. Aerosp. Sci. 86, 28–62 (2016)10.1016/j.paerosci.2016.08.001 ↗
30. Lipton, S., Evans, J., Bazilevs, Y., Elguedj, T., Hughes, T.: Robustness of isogeometric structural discretizations under severe mesh distortion. Comput. Methods Appl. Mech. Eng. 199(5), 357–373 (2010)10.1016/j.cma.2009.01.022 ↗
31. Nguyen, V.P., Anitescu, C., Bordas, S.P., Rabczuk, T.: Isogeometric analysis: an overview and computer implementation aspects. Math. Comput. Simul. 117, 89–116 (2015)10.1016/j.matcom.2015.05.008 ↗
32. Ochoa, O., Reddy, J.: Finite Element Analysis of Composite Laminates. Solid Mechanics and Its Applications. Kluwer, Dordrecht (1992)10.1007/978-94-015-7995-7 ↗
33. Pasharavesh, A., Ahmadian, M.T., Zohoor, H.: Electromechanical modeling and analytical investigation of nonlinearities in energy harvesting piezoelectric beams. Int. J. Mech. Mater. Des. 13(4), 499–514 (2016)10.1007/s10999-016-9353-2 ↗
34. Phung-Van, P., Lorenzis, L.D., Thai, C.H., Abdel-Wahab, M., Nguyen-Xuan, H.: Analysis of laminated composite plates integrated with piezoelectric sensors and actuators using higher-order shear deformation theory and isogeometric finite elements. Comput. Mater. Sci. 96(Part B), 495–505 (2015). special Issue Polymeric Composites10.1016/j.commatsci.2014.04.068 ↗
35. Rogers, D.F.: An Introduction to NURBS: B-spline. The Morgan Kaufmann Series in Computer Graphics. Morgan Kaufmann, San Francisco (2001)
36. Sartorato, M., de Medeiros, R., Tita, V.: A finite element formulation for smart piezoelectric composite shells: mathematical formulation, computational analysis and experimental evaluation. Compos. Struct. 127, 185–198 (2015)10.1016/j.compstruct.2015.03.009 ↗
37. Shumaker, T., Madsen, D., Laurich, J., Black, C., Malitzke, J.: AutoCAD and Its Applications Advanced 2016. Goodheart-Willcox Publisher, Tinley Park (2015)
38. Standards Committee of the IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society IEEE Standard on Piezoelectricity. ANSI/IEEE Std 176-1987 (1988)
39. Stanton, S.C., Erturk, A., Mann, B.P., Inman, D.J.: Nonlinear piezoelectricity in electroelastic energy harvesters: modeling and experimental identification. J. Appl. Phys. 108(7), 074,903 (2010)10.1063/1.3486519 ↗
40. Thai, C.H., Nguyen-Xuan, H., Nguyen-Thanh, N., Le, T.H., Nguyen-Thoi, T., Rabczuk, T.: Static, free vibration, and buckling analysis of laminated composite Reissner–Mindlin plates using NURBS-based isogeometric approach. Int. J. Numer. Methods Eng. 91(6), 571–603 (2012)10.1002/nme.4282 ↗
41. Tsushima, N., Su, W.: Modeling of highly flexible multifunctional wings for energy harvesting. J. Aircr. 53(4), 1033–1044 (2016)10.2514/1.C033496 ↗
42. Wang, D., Liu, W., Zhang, H.: Novel higher order mass matrices for isogeometric structural vibration analysis. Comput. Methods Appl. Mech. Eng. 260, 92–108 (2013)10.1016/j.cma.2013.03.011 ↗
43. Wang, D., Liu, W., Zhang, H.: Superconvergent isogeometric free vibration analysis of Euler Bernoulli beams and Kirchhoff plates with new higher order mass matrices. Comput. Methods Appl. Mech. Eng. 286, 230–267 (2015)10.1016/j.cma.2014.12.026 ↗
44. Willberg, C., Gabbert, U.: Development of a three-dimensional piezoelectric isogeometric finite element for smart structure applications. Acta. Mech. 223(8), 1837–1850 (2012)10.1007/s00707-012-0644-x ↗
45. Xiang, J., Wu, Y., Li, D.: Energy harvesting from the discrete gust response of a piezoaeroelastic wing: modeling and performance evaluation. J. Sound Vib. 343, 176–193 (2015)10.1016/j.jsv.2014.12.023 ↗
46. Yin, S., Yu, T., Bui, T.Q., Xia, S., Hirose, S.: A cutout isogeometric analysis for thin laminated composite plates using level sets. Compos. Struct. 127, 152–164 (2015)10.1016/j.compstruct.2015.03.016 ↗
47. Yin, S., Yu, T., Bui, T.Q., Liu, P., Hirose, S.: Buckling and vibration extended isogeometric analysis of imperfect graded Reissner–Mindlin plates with internal defects using NURBS and level sets. Comput. Struct. 177, 23–38 (2016)10.1016/j.compstruc.2016.08.005 ↗
48. Yin, S., Yu, T., Bui, T.Q., Zheng, X., Yi, G.: Rotation-free isogeometric analysis of functionally graded thin plates considering in-plane material inhomogeneity. Thin Walled Struct. 119, 385–395 (2017)10.1016/j.tws.2017.06.033 ↗
49. Yu, T., Yin, S., Bui, T.Q., Hirose, S.: A simple FSDT-based isogeometric analysis for geometrically nonlinear analysis of functionally graded plates. Finite Elem. Anal. Des. 96, 1–10 (2015)10.1016/j.finel.2014.11.003 ↗
50. Yu, T., Yin, S., Bui, T.Q., Liu, C., Wattanasakulpong, N.: Buckling isogeometric analysis of functionally graded plates under combined thermal and mechanical loads. Compos. Struct. 162, 54–69 (2017)10.1016/j.compstruct.2016.11.084 ↗