Experimental Study of the Self-Potential Response Characteristics of Anisotropic Bituminous Coal during Deformation and Fracturing
Source abstract
Abstract
The deformation and fracturing of coal rock is a crucial part of coal and rock dynamic disasters and is accompanied by variations in the electrical field of the rock. In this study, the self-potential characteristics of coal rock were measured to dynamically monitor the spatiotemporal evolution of coal rock deformation and fracturing. By using an MTS816 rock mechanics test system, an AE acoustic emission system and a self-developed SEMOS-LAB experimental system, synchronous measurements of the self-potential, stress and acoustic emission of anisotropic bituminous coal under uniaxial compression were obtained. The self-potential of anisotropic bituminous coal exhibited a good correspondence with the stress and acoustic emission counts during the damage and fracturing. As the stress gradually increased, the bedding-perpendicular coal samples exhibited a stronger linear relationship with the stress during initial loading than the bedding-parallel samples. The amplitude of the self-potential and stress of the bedding-perpendicular samples were higher than those of the bedding-parallel samples. Anisotropy is an important factor that affects the variation in the self-potential of a rock mass under loading. The results of this study can be applied to evaluate the stress state of coal by measuring its loading-induced electrical potential; thus, this work is important in the field for the monitoring and warning of coal and rock dynamic disasters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Earthquake Detection and Analysis · Geophysical Methods and Applications · Seismic Waves and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory for Deep Geomechanics and Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China
The National Joint Engineering Laboratory of Internet Applied Technology of Mines, China University of Mining and Technology, Xuzhou 221116, China
Internet of Things Perception Mine Research Center, China University of Mining and Technology, Xuzhou 221116, China
School of Resource and Earth Science, China University of Mining and Technology, Xuzhou 221116, China
Funding
National Natural Science Foundation Project of China · Natural Science Foundation of Jiangsu Province · Open Lab Project of CUMT · Fundamental Research Funds for the Central Universities
References (31)
Show source-provided references
1. Scientific conception of precision coal mining
2. Study on rock mechanics in deep mining engineering
3. The characteristic scientific phenomena of engineering response to deep rock mass and the implication if deepness
4. Development Trends and Strategic Research for China’s Energy Engineering Science and Technology to 203510.15302/J-SSCAE-2017.01.010 ↗
5. Electromagnetic radiation characteristics of coal and rocks during excavation in coal mine and their application10.1002/cjg2.645 ↗
6. Experimental study of charge induction of coal samples under uniaxial compression
7. Li, Z.H. (2007). Study on Surface Potential Effect and Its Mechanism of Coal during Deformation and Fracture under Load. [Ph.D. Thesis, China University of Mining & Technology].
8. Mechanism of coal-gas dynamic disasters caused by the superposition of static and dynamic loads and its control technology
9. Mechanical mechanism of coal and gas outburst process
10. State of the art review on mechanism and prevention of coal bumps in China
11. On the mechanism of seismo-electromagnetic phenomena and their possible role in the electromagnetic radiation during periods of earthquakes, foreshocks and aftershocks10.1016/0031-9201(89)90226-4 ↗
12. Studies of natural potential changes in rock sample under stress
13. Study of the electrification of granite samples under compression
14. Enomoto, Y., Shimamoto, T., and Tsutumi, A. (1993). Rapid electric charge fluctuation prior to rock fracturing: Its potential use for an immediate earthquake precursor. International Workshop on Electromagnetic Phenomena Related to Earthquake Prediction, Terra Scientific Publishing Company.
15. Electric potential changes prior to shear fracture in dry and saturated rocks10.1029/98GL01222 ↗
16. New result of the experiment on self-potential change of rocks under biaxial compression
17. Laboratory studies of electrical potential during rock failure10.1016/j.ijrmms.2005.05.018 ↗
18. Current and surface potential induced by stress-activated positive holes in igneous rocks10.1016/j.pce.2006.02.022 ↗
19. Observation of pressure stimulated voltages in rocks using an electric potential sensor10.1063/1.3236774 ↗
20. Pressure stimulated electrical emissions from cement mortar used as failure predictors10.1007/s10704-012-9701-7 ↗
21. Study on strain localization and surface potential distribution law of coal samples fracturing
22. Measurement and correlation of acoustic emissions and pressure stimulated voltages in rock using an electric potential sensor10.1016/j.ijrmms.2016.08.002 ↗
23. Experimental study on the characteristics of potential for coal rock evolution under loading
24. Self-potential characteristics in deep rock mass damage based on point discharge mechanism
25. Yang, C. (2017). Study on the Time-Frequency Electrical Properties of Coal Rock Mass. [Ph.D. Thesis, China University of Mining & Technology].
26. Experimental study on surface potential effect of coal under load
27. Characteristics of self-potential of coal samples under uniaxial compression10.1016/j.jappgeo.2019.05.016 ↗
28. Study on damage evolution and acoustic emission character of coal-rock under uniaxial compression
29. Propagation characteristics and prediction of blast-induced vibration on closely spaced rock tunnels10.1016/j.tust.2022.104416 ↗
30. Study on dynamic shear deformation behaviors and test methodology of sawtooth-shaped rock joints under impact load10.1016/j.ijrmms.2022.105210 ↗
31. Experimental study on coal resistivity changing anisotropy during uniaxial compression