Dynamic analysis of rectangular cut-out plates resting on elastic foundation
Source abstract
Abstract
A finite element method using a 9-node isoparametric plate bending element, incorporating the effects of transverse shear based on the first-order shear deformation theory, is proposed for the free vibration analysis of rectangular cut-out plates resting on an elastic foundation. The elastic foundation is modeled on the Winkler and the Pasternak type, and equations of motion are obtained using the principle of virtual work. To account for the parabolic strain variation through the thickness, a shear correction factor of 5/6 is used, and the effect of rotary inertia has been included in the formulation. The present formulation is compared with established results obtained using analytical methods, with and without rotary inertia, and the max variation observed is 2.24% without rotary inertia and 0.02% with rotary inertia. Cut-out plates are validated with results obtained using the finite element method, and the max variation observed between established results and present formulation is 1.3%. Establishing the accuracy of the current formulation, new results are obtained for rectangular cut-out plates resting on an elastic foundation of various stiffness parameters. The effect of incrementing cut-out dimensions and different layouts of cut-outs in the plate on the free vibration response of plates resting on an elastic foundation is investigated, along with the effects of varying aspect ratios and thickness-to-side ratios.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Structural Load-Bearing Analysis · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Akhavan, H., Hashemi, S.H., Taher, H.R.D., Alibeigloo, A., Vahabi, S.: Exact solutions for rectangular Mindlin plates under in-plane loads resting on Pasternak elastic foundation. Part II: frequency analysis. Comput. Mater. Sci. 44(3), 951–961 (2009). https://doi.org/10.1016/j.commatsci.2008.07.00110.1016/j.commatsci.2008.07.001 ↗
2. Aksu, G.: Free vibration analysis of rectangular plates with cutouts allowing for transverse shear deformation and rotary inertia. Earthq. Eng. Struct. Dyn. 12(5), 709–714 (1984). https://doi.org/10.1002/eqe.429012051010.1002/eqe.4290120510 ↗
3. Ali, R., Atwal, S.J.: Prediction of natural frequencies of vibration of rectangular plates with rectangular cutouts. Comput. Struct. 12(6), 819–823 (1980). https://doi.org/10.1016/0045-7949(80)90019-X10.1016/0045-7949(80)90019-X ↗
4. Alipour, M.M., Shariyat, M., Shaban, M.: A semi-analytical solution for free vibration of variable thickness two-directional-functionally graded plates on elastic foundations. Int. J. Mech. Mater. Des. 6(4), 293–304 (2010). https://doi.org/10.1007/s10999-010-9134-210.1007/s10999-010-9134-2 ↗
5. Alsebai, F., Al Mukahal, F.H.H., Sobhy, M.: Semi-analytical solution for thermo-piezoelectric bending of FG porous plates reinforced with graphene platelets. Mathematics 10(21), 1–30 (2022). https://doi.org/10.3390/math1021410410.3390/math10214104 ↗
6. Atmane, H.A., Tounsi, A., Mechab, I., Bedia, E.A.A.: Free vibration analysis of functionally graded plates resting on Winkler-Pasternak elastic foundations using a new shear deformation theory. Int. J. Mech. Mater. Des. 6(2), 113–121 (2010). https://doi.org/10.1007/s10999-010-9110-x10.1007/s10999-010-9110-x ↗
7. Datta, P., Ray, M.C.: Finite element analysis of laminated composite plates using zeroth-order shear deformation theory. Int. J. Mech. Mater. Des. 12(3), 387–400 (2016). https://doi.org/10.1007/s10999-015-9307-010.1007/s10999-015-9307-0 ↗
8. Dehghan, M., Baradaran, G.H.: Buckling and free vibration analysis of thick rectangular plates resting on elastic foundation using mixed finite element and differential quadrature method. Appl. Math. Comput. 218(6), 2772–2784 (2011). https://doi.org/10.1016/j.amc.2011.08.02010.1016/j.amc.2011.08.020 ↗
9. Guo, H., Zheng, H.: The linear analysis of thin shell problems using the numerical manifold method. Thin Walled Struct. 124(December), 366–383 (2018). https://doi.org/10.1016/j.tws.2017.12.02710.1016/j.tws.2017.12.027 ↗
10. Guo, H., Zheng, H., Zhuang, X.: Numerical manifold method for vibration analysis of Kirchhoff’s plates of arbitrary geometry. Appl. Math. Model. 66, 695–727 (2019a). https://doi.org/10.1016/j.apm.2018.10.00610.1016/j.apm.2018.10.006 ↗
11. Guo, H., Zhuang, X., Rabczuk, T.: A deep collocation method for the bending analysis of Kirchhoff plate. Comput. Mater. Contin. 59(2), 433–456 (2019b). https://doi.org/10.32604/cmc.2019.0666010.32604/cmc.2019.06660 ↗
12. Guo, H., Lin, S., Zheng, H.: GMLS-based numerical manifold method in mechanical analysis of thin plates with complicated shape or cutouts. Eng. Anal. Bound. Elem. 151(January), 597–623 (2023). https://doi.org/10.1016/j.enganabound.2023.03.02810.1016/j.enganabound.2023.03.028 ↗
13. Haldar, S.: Free vibration of composite skewed cylindrical shell panel by finite element method. J. Sound Vib. 311(1–2), 9–19 (2008). https://doi.org/10.1016/j.jsv.2007.08.02210.1016/j.jsv.2007.08.022 ↗
14. Haldar, S., Sheikh, A.H.: Free vibration analysis of isotropic and composite folded plates using a shear flexible element. Finite Elem. Anal. Des. 42(3), 208–226 (2005). https://doi.org/10.1016/j.finel.2005.06.00310.1016/j.finel.2005.06.003 ↗
15. Huang, M.H., Thambiratnam, D.P.: Analysis of plate resting on elastic supports and elastic foundation by finite strip method. Comput. Struct. 79(29–30), 2547–2557 (2001). https://doi.org/10.1016/S0045-7949(01)00134-110.1016/S0045-7949(01)00134-1 ↗
16. Iosilevich, A., Bathe, K.-J., Brezzi, F.: On evaluating the inf-sup condition for plate bending elements. Int. J. Numer. Methods Eng. 40(19), 3639–3663 (1997). https://doi.org/10.1002/(SICI)1097-0207(19971015)40:19%3c3639::AID-NME232%3e3.0.CO;2-H10.1002/(SICI)1097-0207(19971015)40:19<3639::AID-NME232>3.0.CO;2-H ↗
17. Jahromi, H.N., Aghdam, M.M., Fallah, A.: Free vibration analysis of Mindlin plates partially resting on Pasternak foundation. Int. J. Mech. Sci. 75, 1–7 (2013). https://doi.org/10.1016/j.ijmecsci.2013.06.00110.1016/j.ijmecsci.2013.06.001 ↗
18. Joodaky, A., Joodaky, I.: A semi-analytical study on static behavior of thin skew plates on Winkler and Pasternak foundations. Int. J. Mech. Sci. 100, 322–327 (2015). https://doi.org/10.1016/j.ijmecsci.2015.06.02510.1016/j.ijmecsci.2015.06.025 ↗
19. Kalita, K., Haldar, S.: Parametric study on thick plate vibration using FSDT (2015).
20. Kalita, K., Haldar, S.: Natural frequencies of rectangular plate with- and without-rotary inertia. J. Inst. Eng. Ser. C 99(5), 539–555 (2018). https://doi.org/10.1007/s40032-016-0327-910.1007/s40032-016-0327-9 ↗
21. Lee, L.T., Lee, D.C.: Free vibration of rectangular plates on elastic point supports with the application of a new type of admissible function. Comput. Struct. 65(2), 149–156 (1997). https://doi.org/10.1016/S0045-7949(96)00426-910.1016/S0045-7949(96)00426-9 ↗
22. Lee, H.P., Lim, S.P., Chow, S.T.: Effect of transverse shear deformation and rotary inertia on the natural frequencies of rectangular plates with cutouts. Int. J. Solids Struct. 29(11), 1351–1359 (1992). https://doi.org/10.1016/0020-7683(92)90083-610.1016/0020-7683(92)90083-6 ↗
23. Li, J., Huo, Q., Li, X., Kong, X., Wu, W.: Vibration analyses of laminated composite beams using refined higher-order shear deformation theory. Int. J. Mech. Mater. Des. 10(1), 43–52 (2014). https://doi.org/10.1007/s10999-013-9229-710.1007/s10999-013-9229-7 ↗
24. Matsunaga, H.: Vibration and stability of thick plates on elastic foundations. J. Eng. Mech. 126(1), 27–34 (2000). https://doi.org/10.1061/(ASCE)0733-9399(2000)126:1(27)10.1061/(ASCE)0733-9399(2000)126:1(27) ↗
25. Nagino, H., Mikami, T., Mizusawa, T.: Three-dimensional free vibration analysis of isotropic rectangular plates using the B-spline Ritz method. J. Sound Vib. 317(1–2), 329–353 (2008). https://doi.org/10.1016/j.jsv.2008.03.02110.1016/j.jsv.2008.03.021 ↗
26. Ovesy, H.R., Fazilati, J.: Buckling and free vibration finite strip analysis of composite plates with cutout based on two different modeling approaches. Compos. Struct. 94(3), 1250–1258 (2012). https://doi.org/10.1016/j.compstruct.2011.11.00910.1016/j.compstruct.2011.11.009 ↗
27. Pal, S., Haldar, S., Kalita, K.: Dynamic analysis of plates with cut-out carrying concentrated and distributed mass. Int. J. Marit. Eng. 162(A3), 263–276 (2021a). https://doi.org/10.5750/ijme.v162ia3.113610.5750/ijme.v162ia3.1136 ↗
28. Pal, S., Bose, C., Haldar, S.: Free vibration analysis of laminated composite plate with cut-out carrying concentrated and distributed mass. J. Inst. Eng. Ser. C 102(6), 1447–1460 (2021b). https://doi.org/10.1007/s40032-021-00747-y10.1007/s40032-021-00747-y ↗
29. Qin, X., Jin, G., Chen, M., Yin, S.: Free in-plane vibration analysis of circular, annular, and sector plates using isogeometric approach. Shock Vib. 100, 200 (2018). https://doi.org/10.1155/2018/431476110.1155/2018/4314761 ↗
30. Rajamani, A., Prabhakaran, R.: Dynamic response of composite plates with cut-outs, part I: simply-supported plates. J. Sound Vib. 54(4), 549–564 (1977). https://doi.org/10.1016/0022-460X(77)90612-510.1016/0022-460X(77)90612-5 ↗
31. Ray, M.C.: Three-dimensional exact elasticity solutions for antisymmetric angle-ply laminated composite plates. Int. J. Mech. Mater. Des. 17(4), 767–782 (2021). https://doi.org/10.1007/s10999-021-09536-y10.1007/s10999-021-09536-y ↗
32. Reddy, J.N.: Large amplitude flexural vibration of layered composite plates with cutouts. J. Sound Vib. 83(1), 1–10 (1982). https://doi.org/10.1016/S0022-460X(82)80071-010.1016/S0022-460X(82)80071-0 ↗
33. Reddy, J.N.: A Simple Higher-Order Theory for Laminated Composite Plates. J. Appl. Mech. 51(4), 745–752 (1984). https://doi.org/10.1115/1.316771910.1115/1.3167719 ↗
34. Sayyad, A.S., Ghugal, Y.M.: A new shear and normal deformation theory for isotropic, transversely isotropic, laminated composite and sandwich plates. Int. J. Mech. Mater. Des. 10(3), 247–267 (2014). https://doi.org/10.1007/s10999-014-9244-310.1007/s10999-014-9244-3 ↗
35. Sivakumar, K., Iyengar, N.G.R., Deb, K.: Free vibration of laminated composite plates with cutout. J. Sound Vib. 221(3), 443–470 (1999). https://doi.org/10.1006/jsvi.1998.203410.1006/jsvi.1998.2034 ↗
36. Sun, X., Zhang, P., Qiao, H., Lin, K.: High-order free vibration analysis of elastic plates with multiple cutouts. Arch. Appl. Mech. 91(4), 1837–1858 (2021). https://doi.org/10.1007/s00419-020-01857-210.1007/s00419-020-01857-2 ↗
37. Thai, H.T., Park, M., Choi, D.H.: A simple refined theory for bending, buckling, and vibration of thick plates resting on elastic foundation. Int. J. Mech. Sci. 73, 40–52 (2013). https://doi.org/10.1016/j.ijmecsci.2013.03.01710.1016/j.ijmecsci.2013.03.017 ↗
38. Van Vu, T., Curiel-Sosa, J.L., Bui, T.Q.: A refined sin hyperbolic shear deformation theory for sandwich FG plates by enhanced meshfree with new correlation function. Int. J. Mech. Mater. Des. 15(3), 647–669 (2019). https://doi.org/10.1007/s10999-018-9430-910.1007/s10999-018-9430-9 ↗
39. Xiang, Y.: Vibration of rectangular Mindlin plates resting on non-homogenous elastic foundations. Int. J. Mech. Sci. 45(6–7), 1229–1244 (2003). https://doi.org/10.1016/S0020-7403(03)00141-310.1016/S0020-7403(03)00141-3 ↗
40. Xue, Y., Jin, G., Ding, H., Chen, M.: Free vibration analysis of in-plane functionally graded plates using a refined plate theory and isogeometric approach. Compos. Struct. 192(December), 193–205 (2018). https://doi.org/10.1016/j.compstruct.2018.02.07610.1016/j.compstruct.2018.02.076 ↗
41. Ye, T., Jin, G., Su, Z., Chen, Y.: A modified Fourier solution for vibration analysis of moderately thick laminated plates with general boundary restraints and internal line supports. Int. J. Mech. Sci. 80, 29–46 (2014). https://doi.org/10.1016/j.ijmecsci.2014.01.00110.1016/j.ijmecsci.2014.01.001 ↗
42. Zarouni, E., Jalilian Rad, M., Tohidi, H.: Free vibration analysis of fiber reinforced composite conical shells resting on Pasternak-type elastic foundation using Ritz and Galerkin methods. Int. J. Mech. Mater. Des. 10(4), 421–438 (2014). https://doi.org/10.1007/s10999-014-9254-110.1007/s10999-014-9254-1 ↗
43. Zenkour, A.M., Allam, M.N.M., Shaker, M.O., Radwan, A.F.: On the simple and mixed first-order theories for plates resting on elastic foundations. Acta Mech. 220(1–4), 33–46 (2011). https://doi.org/10.1007/s00707-011-0453-710.1007/s00707-011-0453-7 ↗
44. Zenkour, A.M., Allam, M.N.M., Radwan, A.F.: Bending of cross-ply laminated plates resting on elastic foundations under thermo-mechanical loading. Int. J. Mech. Mater. Des. 9(3), 239–251 (2013). https://doi.org/10.1007/s10999-012-9212-810.1007/s10999-012-9212-8 ↗
45. Zhou, D., Cheung, Y.K., Lo, S.H., Au, F.T.K.: Three-dimensional vibration analysis of rectangular thick plates on Pasternak foundation. Int. J. Numer. Methods Eng. 59(10), 1313–1334 (2004). https://doi.org/10.1002/nme.91510.1002/nme.915 ↗
46. Zhuang, X., Guo, H., Alajlan, N., Zhu, H., Rabczuk, T.: Deep autoencoder based energy method for the bending, vibration, and buckling analysis of Kirchhoff plates with transfer learning. Eur. J. Mech. A Solids 87(January), 104225 (2021). https://doi.org/10.1016/j.euromechsol.2021.10422510.1016/j.euromechsol.2021.104225 ↗