Identification of Dynamic Parameters and Frequency Response Properties of Active Hydraulic Mount with Oscillating Coil Actuator: Theory and Experiment

Active hydraulic mounts (AHMs) provide an effective solution for refining ride comfort noise and vibration in passenger cars. AHMs with inertia tracks, decoupler membranes, and oscillating coil actuators (AHM-IT-DM-OCAs) have been extensively studied owing to their compact structures and strong damping characteristics in the low-frequency band. This study focuses on the full parameter identification based on the distinct features of external dynamics, which can be used to obtain an accurate and reliable estimate of the transfer functions required for active control algorithms. A lumped parameter model was established for the AHM-IT-DM-OCAs, and the analytical frequency bands were defined by the two resonance frequencies of the fluid channel and actuator mover. Methods for nonlinear model simplification were proposed in different bands and verified theoretically. Based on the simplified models, the distinct features of the active and passive dynamics are successively revealed, which include three resonances and seven horizontal segments. Subsequently, a series of experimental studies on the distinct features were carried out, which agreed well with the theoretical results. However, owing to the limitations of the test equipment and fixture modalities, only the distinct features of one fixed point, two resonance peaks, and three horizontal segments can be used for parameter identification. Based on the validated distinct features, a procedure for full parameter identification is proposed, and all six key parameters are identified. The obtained results showed good consistency and rationality, indicating that this approach can be used for the transfer function estimation of the primary and secondary paths of the AHM-IT-DM-OCAs.