Reliability-based topology optimization of vibrating structures with frequency constraints
Source abstract
Abstract
There are many inevitable uncertain parameters in engineering systems, and the ignorance of these random factors results in a remarkable reduction in the dynamical system’s performance for the eigenvalue topology optimization problem. To address the problem, a reliability-based topology optimization (RBTO) model for lightweight design with frequency constraints is established, which aims to account the probabilistic behavior incurred by material properties and geometric dimensions. Then, the single loop approach is used to tackle the RBTO problem. The sensitivities of eigenvalues with respect to the design and random variables are also deduced, in which the simple and multiple eigenfrequencies are simultaneously considered. Moreover, the threshold projection approach is used to eliminate the checkerboard phenomena and grey elements for the eigenvalue topology optimization problem. Three examples are discussed to exhibit the validity of the proposed RBTO methodology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Topology Optimization in Engineering · Probabilistic and Robust Engineering Design · Advanced Multi-Objective Optimization Algorithms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. An, H., Chen, S., Huang, H.: Multi-objective optimal design of hybrid composite laminates for minimum cost and maximum fundamental frequency and frequency gaps. Compos. Struct. 209, 268–276 (2019)10.1016/j.compstruct.2018.10.075 ↗
2. Bendsøe, M.P., Sigmund, O.: Material interpolation schemes in topology optimization. Arch. Appl. Mech. 69, 635–654 (1999)10.1007/s004190050248 ↗
3. Chen, J., Du, L., Cui, M., Wang, X., Hu, T.: Topology optimization for continuum structures with frequency probability constraint. Acta Mech. Solida Sin. 27, 71–76 (2006)
4. Cornwell, R.E., Craig, R.R., Johnson, C.P.: On the application of the mode-acceleration method to structural engineering problems. Earthquake Eng. Struct. Dynam. 11, 679–688 (1983)10.1002/eqe.4290110507 ↗
5. Díaaz, A.R., Kikuchi, N.: Solutions to shape and topology eigenvalue optimization problems using a homogenization method. Int. J. Numer. Meth. Eng. 35, 1487–1502 (1992)10.1002/nme.1620350707 ↗
6. Dou, S., Strachan, B.S., Shaw, S.W., Jensen, J.S.: Structural optimization for nonlinear dynamic response. Philosoph. Trans. Royal Soc. A Math. Phys. Eng. Sci. 373, 201 (2015)
7. Du, X., Chen, W.: Sequential optimization and reliability assessment method for efficient probabilistic design. J. Mech. Des. 126, 225–233 (2004)10.1115/1.1649968 ↗
8. Du, J., Olhoff, N.: Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gaps. Struct. Multidiscip. Optim. 34, 91–110 (2007)10.1007/s00158-007-0101-y ↗
9. Duan, Z., Wang, J., Xu, B., Liu, Y., Yan, J.: A new method for concurrent multi-scale design optimization of fiber-reinforced composite frames with fundamental frequency constraints. Struct. Multidiscip. Optim. 64, 3773–3795 (2021)10.1007/s00158-021-03054-3 ↗
10. Dunning, P.D., Kim, H.A., Mullineux, G.: Introducing loading uncertainty in topology optimization. AIAA J. 49, 760–768 (2011)10.2514/1.J050670 ↗
11. Gao, J., Xiao, M., Zhang, Y., Gao, L.: A comprehensive review of isogeometric topology optimization: Methods, applications and prospects. Chin. J. Mech. Eng.. 33, 1–12 (2020)10.1186/s10033-020-00503-w ↗
12. Gu, J., Ma, Z.D., Hulbert, G.M.: A new load-dependent Ritz vector method for structural dynamics analyses: quasi-static Ritz vectors. Finite Elem. Anal. Des. 36, 261–278 (2000)10.1016/S0168-874X(00)00036-6 ↗
13. Guo, X., Zhang, W., Zhang, L.: Robust structural topology optimization considering boundary uncertainties. Comput. Methods Appl. Mech. Eng. 253, 356–368 (2013)10.1016/j.cma.2012.09.005 ↗
14. Haftka, R.T.: Simultaneous analysis and design. AIAA J. 23, 1099–1103 (1985)10.2514/3.9043 ↗
15. He, Z., Wu, Y., Li, E.: Topology optimization of structure for dynamic properties considering hybrid uncertain parameters. Struct. Multidiscip. Optim. 57, 625–638 (2018)10.1007/s00158-017-1769-2 ↗
16. Jang, H.H., Lee, H., Lee, J., Park, G.: Dynamic response topology optimization in the time domain using equivalent static loads. AIAA J. 50, 226–234 (2012)10.2514/1.J051256 ↗
17. Jensen, J.S., Pedersen, N.L.: On maximal eigenfrequency separation in two-material structures: the 1D and 2D scalar cases. J. Sound Vib. 289, 967–986 (2006)10.1016/j.jsv.2005.03.028 ↗
18. Jog, C.S.: Topology design of structures subjected to periodic loading. J. Sound Vib. 253, 687–709 (2002)10.1006/jsvi.2001.4075 ↗
19. Kang, Z., Zhang, X., Jiang, S., Cheng, G.: On topology optimization of damping layer in shell structures under harmonic excitations. Struct. Multidiscip. Optim. 46, 51–67 (2011)10.1007/s00158-011-0746-4 ↗
20. Kang, Z., He, J.J., Shi, L., Miao, Z.H.: A method using successive iteration of analysis and design for large-scale topology optimization considering eigenfrequencies. Comput. Methods Appl. Mech. Eng. 362, 1–10 (2020)10.1016/j.cma.2020.112847 ↗
21. Keshtegar, B., Chakraborty, S.: A hybrid self-adaptive conjugate first order reliability method for robust structural reliability analysis. Appl. Math. Model. 53, 319–332 (2018)10.1016/j.apm.2017.09.017 ↗
22. Kharmanda, G., Olhoff, N., Mohamed, A., Lemaire, M.: Reliability-based topology optimization. Struct. Multidiscip. Optim. 26, 295–307 (2004)10.1007/s00158-003-0322-7 ↗
23. Kim, J., Lee, I.: Modeling of geometric uncertainties in topology optimization via the shift of design nodes. Struct. Multidiscipl. Optimizat. 65, 104265 (2022)10.1007/s00158-022-03277-y ↗
24. Krog, L.A., Olhoff, N.: Optimum topology and reinforcement design of disk and plate structures with multiple stiffness and eigenfrequency objectives. Comput. Struct. 72, 535–563 (1999)10.1016/S0045-7949(98)00326-5 ↗
25. Lagaros, N.D., Plevris, V., Papadrakakis, M.: Neurocomputing strategies for solving reliability-robust design optimization problems. Eng. Comput. 27, 819–840 (2010)10.1108/02644401011073674 ↗
26. Langelaar, M.: Topology optimization of 3D self-supporting structures for additive manufacturing. Addit. Manuf. 12, 60–70 (2016)
27. Lee, U., Lee, I.: Sampling-based weighted reliability-based design optimization. Struct. Multidiscip. Optim. 65, 1–20 (2022)10.1007/s00158-021-03133-5 ↗
28. Lee, J.K., Lee, I., Lee, J.W.: Reliability-based acoustical topology optimization of mufflers under noise frequency and temperature uncertainties. Mech. Syst. Signal Process. 160, 10452 (2021)10.1016/j.ymssp.2021.107854 ↗
29. Li, Z., Shi, T., Xia, Q.: Eliminate localized eigenmodes in level set based topology optimization for the maximization of the first eigenfrequency of vibration. Adv. Eng. Softw. 107, 59–70 (2017)10.1016/j.advengsoft.2016.12.001 ↗
30. Li, Y., Wang, Y., Ma, R., Hao, P.: Improved reliability-based design optimization of non-uniformly stiffened spherical dome. Struct. Multidiscip. Optim. 60, 375–392 (2019)10.1007/s00158-019-02213-x ↗
31. Li, J., Jiang, C., Ni, B., Zhan, L.: Uncertain vibration analysis based on the conceptions of differential and integral of interval process. Int. J. Mech. Mater. Des. 16, 225–244 (2020)10.1007/s10999-019-09470-0 ↗
32. Li, Q., Sigmund, O., Jensen, J.S., Aage, N.: Reduced-order methods for dynamic problems in topology optimization: a comparative study. Comput. Methods Appl. Mech. Eng. 387, 114149 (2021)10.1016/j.cma.2021.114149 ↗
33. Li, Q., Wu, Q., Liu, J., He, J., Liu, S.: Topology optimization of vibrating structures with frequency band constraints. Struct. Multidiscip. Optim. 63, 1203–1218 (2021b)10.1007/s00158-020-02753-7 ↗
34. Li, Q., Wu, Q., Dou, S., Wang, J., Liu, S., et al.: Nonlinear eigenvalue topology optimization for structures with frequency-dependent material properties. Mech. Syst. Signal Process. 170, 108835 (2022)10.1016/j.ymssp.2022.108835 ↗
35. Liang, J., Mourelatos, Z.P., Tu, J.: A single-loop method for reliability-based design optimisation. Int. J. Prod. Dev. 5, 76–92 (2008)10.1504/IJPD.2008.016371 ↗
36. Liu, J.K., Ma, Y.S.: A survey of manufacturing oriented topology optimization methods. Adv. Eng. Softw. 100, 161–175 (2016)10.1016/j.advengsoft.2016.07.017 ↗
37. Liu, J., Yu, Z., Zhang, D., Liu, H., Han, X.: Multimodal ellipsoid model for non-probabilistic structural uncertainty quantification and propagation. Int. J. Mech. Mater. Des. 17, 633–657 (2021)10.1007/s10999-021-09551-z ↗
38. Long, K., Yang, X.Y., Saeed, N., Tian, R.H., Wen, P., et al.: Topology optimization of transient problem with maximum dynamic response constraint using SOAR scheme. Front. Mech. Eng. 16, 593–606 (2021)10.1007/s11465-021-0636-4 ↗
39. Lü, H., Yang, K., Huang, X., Yin, H.: Design optimization of hybrid uncertain structures with fuzzy-boundary interval variables. Int. J. Mech. Mater. Des. 17, 201–224 (2021)10.1007/s10999-020-09523-9 ↗
40. Ma, Z.D., Kikuchi, N., Hagiwara, I.: Structural topology and shape optimization for a frequency response problem. Comput. Mech. 13, 157–174 (1993)10.1007/BF00370133 ↗
41. Ma, Z.D., Cheng, H.C., Kikuchi, N.: Structural design for obtaining desired eigenfrequencies by using the topology and shape optimization method. Comput. Syst. Eng. 5, 77–89 (1994)10.1016/0956-0521(94)90039-6 ↗
42. Ma, Z.D., Kikuchi, N., Cheng, H.C.: Topological design for vibrating structures. Comput. Methods Appl. Mech. Eng. 121, 259–280 (1995)10.1016/0045-7825(94)00714-X ↗
43. Maeda, Y., Nishiwaki, S., Izui, K., Yoshimura, M., Matsui, K., et al.: Structural topology optimization of vibrating structures with specified eigenfrequencies and eigenmode shapes. Int. J. Numer. Meth. Eng. 67, 597–628 (2006)10.1002/nme.1626 ↗
44. Meng, Z., Keshtegar, B.: Adaptive conjugate single-loop method for efficient reliability-based design and topology optimization. Comput. Methods Appl. Mech. Eng. 344, 95–119 (2019)10.1016/j.cma.2018.10.009 ↗
45. Meng, Z., Pang, Y., Pu, Y., Wang, X.: New hybrid reliability-based topology optimization method combining fuzzy and probabilistic models for handling epistemic and aleatory uncertainties. Comput. Methods Appl. Mechan. Eng. 363, 125 (2020)10.1016/j.cma.2020.112886 ↗
46. Nguyen, T.H., Song, J., Paulino, G.H.: Single-loop system reliability-based topology optimization considering statistical dependence between limit-states. Struct. Multidiscip. Optim. 44, 593–611 (2011)10.1007/s00158-011-0669-0 ↗
47. Rong, J.H., Xie, Y.M., Yang, X.Y., Liang, Q.Q.: Topology optimization of structures under dynamic response constraints. J. Sound Vib. 234, 177–189 (2000)10.1006/jsvi.1999.2874 ↗
48. Rosario, Z.D., Fenrich, R.W., Iaccarino, G.: Cutting the double loop: theory and algorithms for reliability-based design optimization with parametric uncertainty. Int. J. Numer. Methods Eng. 118, 718–740 (2019)10.1002/nme.6035 ↗
49. Seyranian, A.P., Lund, E., Olhoff, N.: Multiple eigenvalues in structural optimization problems. Struct. Optimizat. 8, 207–227 (1994)10.1007/BF01742705 ↗
50. Shu, L., Wang, M.Y., Fang, Z.D., Ma, Z.D., Wei, P.: Level set based structural topology optimization for minimizing frequency response. J. Sound Vib. 330, 5820–5834 (2011)10.1016/j.jsv.2011.07.026 ↗
51. Sigmund, O.: Morphology-based black and white filters for topology optimization. Struct. Multidiscip. Optim. 33, 401–424 (2007)10.1007/s00158-006-0087-x ↗
52. Sigmund, O., Maute, K.: Topology optimization approaches. Struct. Multidiscip. Optim. 48, 1031–1055 (2013)10.1007/s00158-013-0978-6 ↗
53. Wang, F., Lazarov, B.S., Sigmund, O.: On projection methods, convergence and robust formulations in topology optimization. Struct. Multidiscip. Optim. 43, 767–784 (2010)10.1007/s00158-010-0602-y ↗
54. Wang, L., Liu, D., Yang, Y., Wang, X., Qiu, Z.: A novel method of non-probabilistic reliability-based topology optimization corresponding to continuum structures with unknown but bounded uncertainties. Comput. Methods Appl. Mech. Eng. 326, 573–595 (2017)10.1016/j.cma.2017.08.023 ↗
55. Wang, L., Xia, H., Yang, Y., Cai, Y., Qiu, Z.: A novel approach of reliability-based topology optimization for continuum structures under interval uncertainties. Rapid Prototyp. J. 25, 105876 (2018)
56. Wilson, E.L., Yuan, M.W., Dickens, J.M.: Dynamic analysis by direct superposition of Ritz vectors. Earthquake Eng. Struct. Dynam. 10, 813–821 (1982)10.1002/eqe.4290100606 ↗
57. Xia, H., Qiu, Z., Wang, L.: Reliability-based topology optimization for freely vibrating continuum structures with unknown-but-bounded uncertainties. Struct. Multidiscip. Optim. 63, 2751–2770 (2021)10.1007/s00158-020-02834-7 ↗
58. Xu, B., Han, Y.S., Zhao, L., Xie, Y.M.: Topology optimization of continuum structures for natural frequencies considering casting constraints. Eng. Optim. 51, 941–960 (2019)10.1080/0305215X.2018.1506771 ↗
59. Yoon, G.H.: Maximizing the fundamental eigenfrequency of geometrically nonlinear structures by topology optimization based on element connectivity parameterization. Comput. Struct. 88, 120–133 (2010)10.1016/j.compstruc.2009.07.006 ↗
60. Zhao, J., Wang, C.: Topology optimization for minimizing the maximum dynamic response in the time domain using aggregation functional method. Comput. Struct. 190, 41–60 (2017)10.1016/j.compstruc.2017.05.002 ↗
61. Zhao, J., Yoon, H., Youn, B.D.: Concurrent topology optimization with uniform microstructure for minimizing dynamic response in the time domain. Comput. Struct. 222, 98–117 (2019)10.1016/j.compstruc.2019.07.008 ↗
62. Zheng, J., Luo, Z., Li, H., Jiang, C.: Robust topology optimization for cellular composites with hybrid uncertainties. Int. J. Numer. Meth. Eng. 115, 695–713 (2018)10.1002/nme.5821 ↗
63. Zheng, J., Luo, Z., Jiang, C., Gao, J.: Robust topology optimization for concurrent design of dynamic structures under hybrid uncertainties. Mech. Syst. Signal Process. 120, 540–559 (2019)10.1016/j.ymssp.2018.10.026 ↗