Microstructure, tribological and corrosion-resistance properties of WC-DLC/DLC multilayer coatings with varying modulation periods on Cu–Sn alloy substrates

1. Akhavan, B., Ganesan, R., Matthews, D.T.A., McKenzie, D.R., Bilek, M.M.M.: Noble gas control of diamond-like content and compressive stress in carbon films by arc-mixed mode high power impulse magnetron sputtering. Surf. Coat. Technol. 427, 127785 (2021). https://doi.org/10.1016/j.surfcoat.2021.12778510.1016/j.surfcoat.2021.127785 ↗

2. Ali, R., Sebastiani, M., Bemporad, E.: Influence of Ti–TiN multilayer PVD-coatings design on residual stresses and adhesion. Mater. des. 75, 47–56 (2015). https://doi.org/10.1016/j.matdes.2015.03.00710.1016/j.matdes.2015.03.007 ↗

3. Bociaga, D., Sobczyk-Guzenda, A., Szymanski, W., Jedrzejczak, A., Jastrzebska, A., Olejnik, A., Jastrzebski, K.: Mechanical properties, chemical analysis and evaluation of antimicrobial response of Si-DLC coatings fabricated on AISI 316 LVM substrate by a multi-target DC-RF magnetron sputtering method for potential biomedical applications. Appl. Surf. Sci. 417, 23–33 (2017). https://doi.org/10.1016/j.apsusc.2017.03.22310.1016/j.apsusc.2017.03.223 ↗

4. Cao, H., Qi, F., Ouyang, X., Zhao, N., Zhou, Y., Li, B., Luo, W., Liao, B., Luo, J.: Effect of Ti transition layer thickness on the structure, mechanical and adhesion properties of Ti-DLC coatings on aluminum alloys. Materials. 11, 1742 (2018). https://doi.org/10.3390/ma1109174210.3390/ma11091742 ↗

5. Cao, H., Yang, J., Li, Y., Ren, L., Qi, F., Zhao, N., Zhou, Y., Li, B., Ouyang, X.: Effect of nitrogen pressure on the microstructure, mechanical and electrochemical properties of CrAlN coatings deposited by filter cathode vacuum arc. Ceram. Int. 48, 36570–36584 (2022). https://doi.org/10.1016/j.ceramint.2022.08.21610.1016/j.ceramint.2022.08.216 ↗

6. Casiraghi, C., Piazza, F., Ferrari, A.C., Grambole, D., Robertson, J.: Bonding in hydrogenated diamond-like carbon by raman spectroscopy. Diamond Relat. Mater. 14, 1098–1102 (2005). https://doi.org/10.1016/j.diamond.2004.10.03010.1016/j.diamond.2004.10.030 ↗

7. Chen, J., Zhang, Z., Yang, G., Fang, Z., Yang, Z., Li, Z., He, G.: Performance and damage mechanism of TiN/ZrN nano-multilayer coatings based on different erosion angles. Appl. Surf. Sci. 513, 145457 (2020). https://doi.org/10.1016/j.apsusc.2020.14545710.1016/j.apsusc.2020.145457 ↗

8. Chen, Y., Su, F., Li, Q., Sun, J., Lin, S., Ma, G.: Extremely enhanced friction and wear performance of hydrogen-free DLC film at elevated temperatures via Si doping. Tribol. Int. 199, 109981 (2024). https://doi.org/10.1016/j.triboint.2024.10998110.1016/j.triboint.2024.109981 ↗

9. Cui, J., Qiang, L., Zhang, B., Ling, X., Yang, T., Zhang, J.: Mechanical and tribological properties of Ti-DLC films with different Ti content by magnetron sputtering technique. Appl. Surf. Sci. 258, 5025–5030 (2012). https://doi.org/10.1016/j.apsusc.2012.01.07210.1016/j.apsusc.2012.01.072 ↗

10. Derakhshandeh, M.R., Eshraghi, M.J., Javaheri, M., Khamseh, S., Sari, M.G., Zarrintaj, P., Saeb, M.R., Mozafari, M.: Diamond-like carbon-deposited films: a new class of biocorrosion protective coatings. Surf. Innov. 6, 266–276 (2018). https://doi.org/10.1680/jsuin.18.0000210.1680/jsuin.18.00002 ↗

11. El-Mahdy, G.A., Nishikata, A., Tsuru, T.: Electrochemical corrosion monitoring of galvanized steel under cyclic wet–dry conditions. Corros. Sci. 42, 183–194 (2000). https://doi.org/10.1016/S0010-938X(99)00057-810.1016/S0010-938X(99)00057-8 ↗

12. Feng, X., Cao, S., Zheng, Y., He, Y., Wang, K., Zhang, K., Zhou, H.: Influence of W contents on the microstructure and tribological properties of W-DLC coatings deposited by PECVD combined with magnetron sputtering. Vacuum 226, 113293 (2024). https://doi.org/10.1016/j.vacuum.2024.11329310.1016/j.vacuum.2024.113293 ↗

13. Gilewicz, A., Warcholinski, B., Szymanski, W., Grimm, W.: CrCN/CrN+ta-C multilayer coating for applications in wood processing. Tribol. Int. 57, 1–7 (2013). https://doi.org/10.1016/j.triboint.2012.07.00610.1016/j.triboint.2012.07.006 ↗

14. Han, C., Yang, T., Lin, X., Song, Y., Xie, M., Deng, Q., Wen, F.: Effect of bias gradient delta on mechanical and tribological properties of DLC films sputtered on ACM. Surf. Coat. Technol. 481, 130626 (2024). https://doi.org/10.1016/j.surfcoat.2024.13062610.1016/j.surfcoat.2024.130626 ↗

15. Haneef, M., Evaristo, M., Yang, L., Morina, A., Trindade, B.: Wear control and friction reduction in newly developed multilayer Mg-DLC coatings using organic base oil and sustainable lubrication additives. Wear 572, 206067 (2025). https://doi.org/10.1016/j.wear.2025.20606710.1016/j.wear.2025.206067 ↗

16. He, D., Pan, X., Mao, F., Shang, L.: Probing the low friction mechanisms of WC/a-C films under low humidity conditions. Tribol. Int. 202, 110390 (2025). https://doi.org/10.1016/j.triboint.2024.11039010.1016/j.triboint.2024.110390 ↗

17. Huang, J.-H., Ma, C.-H., Chen, H.: Effect of Ti interlayer on the residual stress and texture development of TiN thin films. Surf. Coat. Technol. 200, 5937–5945 (2006). https://doi.org/10.1016/j.surfcoat.2005.09.00510.1016/j.surfcoat.2005.09.005 ↗

18. Hui, J., Feng, Z., Fan, W., Yuan, X.: The influence of power spinning and annealing temperature on microstructures and properties of Cu-Sn alloy. Mater Charact 144, 611–620 (2018). https://doi.org/10.1016/j.matchar.2018.08.01510.1016/j.matchar.2018.08.015 ↗

19. Jorio, A., Ferreira, E.H.M., Moutinho, M.V.O., Stavale, F., Achete, C.A., Capaz, R.B.: Measuring disorder in graphene with the G and D bands. Phys. Status Solidi (b) 247, 2980–2982 (2010). https://doi.org/10.1002/pssb.20100024710.1002/pssb.201000247 ↗

20. Karthik, M., Abhinav, J., Shankar, K.V.: Morphological and mechanical behaviour of Cu–Sn alloys—a review. Met. Mater. Int. 27, 1915–1946 (2021). https://doi.org/10.1007/s12540-020-00899-z10.1007/s12540-020-00899-z ↗

21. Kelly, P.J., Arnell, R.D.: Magnetron sputtering: a review of recent developments and applications. Vacuum 56, 159–172 (2000). https://doi.org/10.1016/S0042-207X(99)00189-X10.1016/S0042-207X(99)00189-X ↗

22. Kim, D.-W., Kim, K.-W.: Effects of sliding velocity and normal load on friction and wear characteristics of multi-layered diamond-like carbon (DLC) coating prepared by reactive sputtering. Wear 297, 722–730 (2013). https://doi.org/10.1016/j.wear.2012.10.00910.1016/j.wear.2012.10.009 ↗

23. Lee, A.Y., Yang, K., Anh, N.D., Park, C., Lee, S.M., Lee, T.G., Jeong, M.S.: Raman study of D* band in graphene oxide and its correlation with reduction. Appl. Surf. Sci. 536, 147990 (2021). https://doi.org/10.1016/j.apsusc.2020.14799010.1016/j.apsusc.2020.147990 ↗

24. Li, L.H., Tian, X.B., Chu, P.K., Zhang, Y.H., Cui, X.M., Zhang, H.Q.: Growth and nucleation of diamond-like carbon (DLC) film on aluminum. Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms 206, 691–695 (2003). https://doi.org/10.1016/S0168-583X(03)00827-910.1016/S0168-583X(03)00827-9 ↗

25. Li, H., Sun, P., Cheng, D.: Structure and properties of a-C:H:Si:O films deposited by cage-like hollow cathode discharge on AZ31 alloy. Tribol. Int. 175, 107848 (2022). https://doi.org/10.1016/j.triboint.2022.10784810.1016/j.triboint.2022.107848 ↗

26. Li, Q., Huang, T., Yang, M., Gao, T., Ji, B., Zhang, S., Zhang, L., Tu, R.: Effects of gradient structure and modulation period of Ta/TaN/Ta(C,N)/Ta-DLC multilayer coatings prepared by HiPIMS. Surf. Coat. Technol. 459, 129406 (2023). https://doi.org/10.1016/j.surfcoat.2023.12940610.1016/j.surfcoat.2023.129406 ↗

27. Li, M., Liu, Y., Kim, D.-E., Penkov, O.V.: Graphene tribofilm formation on hydrogen-free DLC/B4C periodical nano-multilayer coatings: effect of sputtering in N2 atmosphere. Carbon 243, 120529 (2025). https://doi.org/10.1016/j.carbon.2025.12052910.1016/j.carbon.2025.120529 ↗

28. Liang, C.-H., Huang, C.-F., Tsai, H.-Y.: The influence of substrate bias voltages on structure, mechanical properties and anti-corrosion performance of Cr doped diamond-like carbon films deposited by steered cathodic arc evaporation. Thin Solid Films 597, 88–96 (2015). https://doi.org/10.1016/j.tsf.2015.11.01010.1016/j.tsf.2015.11.010 ↗

29. Liang, S., He, D., Shang, L., Li, W., Zhang, C., Shao, L., Seniuts, U., Viktor, Z.: Effect of cermet interlayer on the electrochemical behavior of Cr3C2-NiCr/DLC duplex coating. Surf. Coat. Technol. 469, 129813 (2023). https://doi.org/10.1016/j.surfcoat.2023.12981310.1016/j.surfcoat.2023.129813 ↗

30. Lin, Y., Zia, A.W., Zhou, Z., Shum, P.W., Li, K.Y.: Development of diamond-like carbon (DLC) coatings with alternate soft and hard multilayer architecture for enhancing wear performance at high contact stress. Surf. Coat. Technol. 320, 7–12 (2017). https://doi.org/10.1016/j.surfcoat.2017.03.00710.1016/j.surfcoat.2017.03.007 ↗

31. Liu, L., Tang, W., Ruan, Q., Wu, Z., Yang, C., Cui, S., Ma, Z., Fu, R.K.Y., Tian, X., Wang, R., Wu, Z., Chu, P.K.: Robust and durable surperhydrophobic F-DLC coating for anti-icing in aircrafts engineering. Surf. Coat. Technol. 404, 126468 (2020). https://doi.org/10.1016/j.surfcoat.2020.12646810.1016/j.surfcoat.2020.126468 ↗

32. Long, R., Sun, Y., Zhang, Y., Shang, Q., Ramteke, S.M., Marian, M.: Influence of micro-texture radial depth variations on the tribological and vibration characteristics of rolling bearings under starved lubrication. Tribol. Int. 194, 109545 (2024). https://doi.org/10.1016/j.triboint.2024.10954510.1016/j.triboint.2024.109545 ↗

33. Luo, G., Xu, X., Dong, H., Wei, Q., Tian, F., Qin, J., Shen, Q.: Enhance the tribological performance of soft AISI 1045 steel through a CrN/W-DLC/DLC multilayer coating. Surf. Coat. Technol. 485, 130916 (2024). https://doi.org/10.1016/j.surfcoat.2024.13091610.1016/j.surfcoat.2024.130916 ↗

34. Ma, X., Wang, J., Xu, J., Jing, J., Li, J., Zhu, H., Yu, S., Hu, Z.: Sunflower head pectin with different molecular weights as promising green corrosion inhibitors of carbon steel in hydrochloric acid solution. ACS Omega 4, 21148–21160 (2019). https://doi.org/10.1021/acsomega.9b0257010.1021/acsomega.9b02570 ↗

35. Morshed-Behbahani, K., Aliyu, A., Bishop, D.P., Nasiri, A.: Additive manufacturing of copper-based alloys for high-temperature aerospace applications: a review. Mater. Today Commun. 38, 108395 (2024). https://doi.org/10.1016/j.mtcomm.2024.10839510.1016/j.mtcomm.2024.108395 ↗

36. Pandey, M., Bhatacharyya, D., Patil, D.S., Ramachandran, K., Venkatramani, N.: Diamond-like carbon coatings: AFM and ellipsometric studies. Surf. Coat. Technol. 182, 24–34 (2004). https://doi.org/10.1016/S0257-8972(03)00876-410.1016/S0257-8972(03)00876-4 ↗

37. Pewnim, N., Roy, S.: Electrodeposition of tin-rich Cu–Sn alloys from a methanesulfonic acid electrolyte. Electrochim. Acta 90, 498–506 (2013). https://doi.org/10.1016/j.electacta.2012.12.05310.1016/j.electacta.2012.12.053 ↗

38. Robertson, J.: Properties of diamond-like carbon. Surf. Coat. Technol. 50, 185–203 (1992). https://doi.org/10.1016/0257-8972(92)90001-Q10.1016/0257-8972(92)90001-Q ↗

39. Robertson, J.: Diamond-like amorphous carbon. Mater. Sci. Eng. R. Rep. 37, 129–281 (2002). https://doi.org/10.1016/S0927-796X(02)00005-010.1016/S0927-796X(02)00005-0 ↗

40. Sheng, L., Xiao, Y., Jiao, C., Du, B., Li, Y., Wu, Z., Shao, L.: Influence of layer number on microstructure, mechanical properties and wear behavior of the TiN/Ti multilayer coatings fabricated by high-power magnetron sputtering deposition. J. Manuf. Process. 70, 529–542 (2021). https://doi.org/10.1016/j.jmapro.2021.09.00210.1016/j.jmapro.2021.09.002 ↗

41. Wang, Q., Zhou, F., Zhou, Z., Yang, Y., Yan, C., Wang, C., Zhang, W., Li, L.K.-Y., Bello, I., Lee, S.-T.: Influence of Ti content on the structure and tribological properties of Ti-DLC coatings in water lubrication. Diamond Relat. Mater. 25, 163–175 (2012). https://doi.org/10.1016/j.diamond.2012.03.00510.1016/j.diamond.2012.03.005 ↗

42. Wang, Z.M., Zhang, J., Han, X., Li, Q.F., Wang, Z.L., Wei, R.: Corrosion and salt scale resistance of multilayered diamond-like carbon film in CO2 saturated solutions. Corros. Sci. 86, 261–267 (2014). https://doi.org/10.1016/j.corsci.2014.05.01510.1016/j.corsci.2014.05.015 ↗

43. Wang, L., Jin, J., Zhu, C., Li, G., Kuang, X., Huang, K.: Effects of HiPIMS pulse-length on plasma discharge and on the properties of WC-DLC coatings. Appl. Surf. Sci. 487, 526–538 (2019). https://doi.org/10.1016/j.apsusc.2019.05.04610.1016/j.apsusc.2019.05.046 ↗

44. Wang, D., Lin, S., Tian, T., Liu, M., Chang, G., Dong, D., Shi, J., Dai, M., Jiang, B., Zhou, K.: Sand erosion and crack propagation mechanism of Cr/CrN/Cr/CrAlN multilayer coating. Ceram. Int. 48, 24638–24648 (2022). https://doi.org/10.1016/j.ceramint.2022.05.10910.1016/j.ceramint.2022.05.109 ↗

45. Wang, X., Li, S., Fan, S., Yu, D., Deng, J., Zuo, C.: Study on properties and tribological behaviors of silicon nitride-based Ti-DLC films. Surf. Coat. Technol. 506, 132131 (2025). https://doi.org/10.1016/j.surfcoat.2025.13213110.1016/j.surfcoat.2025.132131 ↗

46. Wei, X., Lu, S., Ding, J., Zheng, S., Chen, Z., Lu, J., Liu, Z., Yin, P., Du, N., Yang, W., Feng, H., Zhang, G., Li, X.: Enhanced corrosion resistance of a novel periodic multilayered Si/(Si, N)-DLC coating against simulated coal mine water. Ceram. Int. 50, 49385–49399 (2024). https://doi.org/10.1016/j.ceramint.2024.09.28310.1016/j.ceramint.2024.09.283 ↗

47. Wen, M., Huang, H., Zhang, K., Meng, Q., Li, X., Zhang, X., Kong, L., Zheng, W.: Effects of modulation periodicity on microstructure, mechanical and tribological properties of NbN/AlN nanostructured multilayer films. Appl. Surf. Sci. 284, 331–339 (2013). https://doi.org/10.1016/j.apsusc.2013.07.10210.1016/j.apsusc.2013.07.102 ↗

48. Wilsnack, E., Zawischa, M., Makowski, S., Zimmermann, M., Leyens, C.: Low cycle fatigue of doped tetrahedral amorphous carbon coatings by repetitive micro scratch tests. Surf. Coat. Technol. 482, 130687 (2024). https://doi.org/10.1016/j.surfcoat.2024.13068710.1016/j.surfcoat.2024.130687 ↗

49. Wu, L., Graves, J.E., Cobley, A.J.: Mechanism for the development of Sn-Cu alloy coatings produced by pulsed current electrodeposition. Mater. Lett. 217, 120–123 (2018). https://doi.org/10.1016/j.matlet.2018.01.09410.1016/j.matlet.2018.01.094 ↗

50. Wu, Y., Shi, B., Liu, Y., Wang, L., Gao, J., Shen, Y., Wang, Y., Ma, Y., Yu, S.: Design of Ta gradient layer to improve adhesion strength between Cu substrate and DLC film. Vacuum 203, 111221 (2022). https://doi.org/10.1016/j.vacuum.2022.11122110.1016/j.vacuum.2022.111221 ↗

51. Xiao, Z., Ren, L., Guo, C., Liang, L., Dai, Y., Tang, K., Lu, L., Qi, F., She, J., Wang, L., Ouyang, X.: Enhanced corrosion resistance, mechanical properties, and biocompatibility of N-DLC coatings prepared on WE43 alloy via FCVA technology. J. Alloys Compd. 1010, 178106 (2025). https://doi.org/10.1016/j.jallcom.2024.17810610.1016/j.jallcom.2024.178106 ↗

52. Xing, Y., Wang, X., Du, Z., Zhu, Z., Wu, Z., Liu, L.: Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic. Ceram. Int. 48, 514–524 (2022). https://doi.org/10.1016/j.ceramint.2021.09.12810.1016/j.ceramint.2021.09.128 ↗

53. Xu, Z., Sun, H., Leng, Y.X., Li, X., Yang, W., Huang, N.: Effect of modulation periods on the microstructure and mechanical properties of DLC/TiC multilayer films deposited by filtered cathodic vacuum arc method. Appl. Surf. Sci. 328, 319–324 (2015). https://doi.org/10.1016/j.apsusc.2014.12.04110.1016/j.apsusc.2014.12.041 ↗

54. Yang, W., Xu, D., Gao, Y., Hu, L., Ke, P., Chen, J.: Microstructure, adhesion, in vitro corrosion resistance and tribological behavior of (Si:N)-DLC coated pure Ti. Diamond Relat. Mater. 92, 109–116 (2019). https://doi.org/10.1016/j.diamond.2018.12.02710.1016/j.diamond.2018.12.027 ↗

55. Yu, G., Chen, W., Wang, H., Tang, W., Gong, Z., Zhang, J.: The establishment of superlubricity in engineering field for H-DLC composite in multi-environments. Carbon 230, 119621 (2024). https://doi.org/10.1016/j.carbon.2024.11962110.1016/j.carbon.2024.119621 ↗

56. Yu, S., Li, D., Ye, Y., Ye, Z., Xu, F., Lang, W., Liu, J., Yu, X., Qin, Q.H.: Tribological and corrosive performance of functional gradient DLC coatings prepared by a hybrid HiPIMS/CVD techniques. Vacuum 238, 114160 (2025). https://doi.org/10.1016/j.vacuum.2025.11416010.1016/j.vacuum.2025.114160 ↗

57. Zeng, C., Chen, Q., Xu, M., Deng, S., Luo, Y., Wu, T.: Enhancement of mechanical, tribological and morphological properties of nitrogenated diamond-like carbon films by gradient nitrogen doping. Diamond Relat. Mater. 76, 132–140 (2017). https://doi.org/10.1016/j.diamond.2017.05.00410.1016/j.diamond.2017.05.004 ↗

58. Zhang, Z., Yang, M., He, G.: Structure, mechanical, and sand erosion behavior of TiN/Ti coating deposited at various temperature. Ceram. Int. 49, 16786–16795 (2023). https://doi.org/10.1016/j.ceramint.2023.02.03910.1016/j.ceramint.2023.02.039 ↗

59. Zhang, Y., Luo, J., Wu, Z., Qin, Z., Ji, H., Liu, X., Zeng, H., Hu, W.: Enhancement of corrosion resistance and superparamagnetic property by structural modulation in (Co-DLC)/DLC multilayered nanocomposite films. Surf. Coat. Technol. 482, 130689 (2024). https://doi.org/10.1016/j.surfcoat.2024.13068910.1016/j.surfcoat.2024.130689 ↗

60. Zhang, Y., Wen, J., Wu, Z., Qin, Z., Ji, H., Liu, X., Hu, W.: Room-temperature negative magnetoresistance of FeCo-diamond like carbon nanocomposite film with high anticorrosion and antibiosis. Carbon 235, 120090 (2025). https://doi.org/10.1016/j.carbon.2025.12009010.1016/j.carbon.2025.120090 ↗

61. Zhao, Q., Kang, S., Zou, F., Huo, Z.: Structure and properties of Si and N co-doping on DLC film corrosion resistance. Ceram. Int. 49, 2121–2129 (2023). https://doi.org/10.1016/j.ceramint.2022.09.17810.1016/j.ceramint.2022.09.178 ↗

62. Zhao, Y., Xu, F., Yuan, L., Zhao, W., Zhang, H., Zuo, D.: Microstructural, mechanical and tribological performances of DLC/CrN multilayer films with different modulation period. Diamond Relat. Mater. 154, 112163 (2025). https://doi.org/10.1016/j.diamond.2025.11216310.1016/j.diamond.2025.112163 ↗

63. Zhou, C., Ru, L., Xiao, J., Zhang, X., Mo, X., Jiang, A.: Cr content regulates the friction and corrosion resistance of Cr/F-DLC thin films. Diamond Relat. Mater. 157, 112482 (2025). https://doi.org/10.1016/j.diamond.2025.11248210.1016/j.diamond.2025.112482 ↗

64. Zou, Y., Wang, Y., Xu, S., Jin, T., Wei, D., Ouyang, J., Jia, D., Zhou, Y.: Superhydrophobic double-layer coating for efficient heat dissipation and corrosion protection. Chem. Eng. J. 362, 638–649 (2019). https://doi.org/10.1016/j.cej.2019.01.08610.1016/j.cej.2019.01.086 ↗