Control of geometrically nonlinear vibrations of skew laminated composite plates using skew or rectangular 1–3 piezoelectric patches
Source abstract
Abstract
This paper deals with the analysis of active constrained layer damping (ACLD) of geometrically nonlinear transient vibrations of skew laminated composite plates using skew or rectangular patches of the ACLD treatment. The constraining layer of the patch of the ACLD treatment is composed of the vertically/obliquely reinforced 1–3 piezoelectric composite material. The Golla–Hughes–McTavish method has been used to model the constrained viscoelastic layer of the ACLD treatment in the time domain. A coupled electromechanical nonlinear three dimensional finite element model of skew laminated thin composite plates integrated with the skew or rectangular patches of ACLD treatment has been derived. The performance of the patches is investigated for different configurations of their placements on the top surface of the skew substrate plates. The analysis reveals that the ACLD treatment significantly improves the active damping characteristics of the skew laminated composite plates over the passive damping for suppressing their geometrically nonlinear transient vibrations. It is found that even though the substrate laminated plates are skew, a rectangular patch of the ACLD treatment located at the centre of the top surface of the substrate should be used for optimum damping of geometrically nonlinear vibrations of skew laminated composite plates irrespective of their skew angles and boundary conditions. The effects of piezoelectric fiber orientation angle and the skew angles of the substrate plates on the control authority of the ACLD patches have been emphatically investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Aeroelasticity and Vibration Control · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Aboudi, J.: Micromechanical prediction of the effective coefficients of thermo-piezoelectric multiphase composites. J. Intell. Mater. Syst. Struct. 9, 713–722 (1998)10.1177/1045389X9800900903 ↗
2. Azvine, B., Tomlinson, G.R., Wynne, R.J.: Use of active constrained layer damping for controlling resonant. Smart Mater. Struct. 4, 1–6 (1995)10.1088/0964-1726/4/1/001 ↗
3. Babu, C.S., Kant, T.: Two shear deformable finite element models for buckling analysis of skew fibre-reinforced composite and sandwich panels. Compos. Struct. 46(2), 115–124 (1999)10.1016/S0263-8223(99)00039-2 ↗
4. Bailey, T., Hubbard, J.E.: Distributed piezoelectric polymer active vibration control of a cantilever beam. J. Guid. Control Dyn. 8(5), 605–611 (1985)10.2514/3.20029 ↗
5. Baz, A., Poh, S.: Performance of an active control system with piezoelectric actuators. J. Sound Vib. 126(2), 327–343 (1988)10.1016/0022-460X(88)90245-3 ↗
6. Baz, A., Poh, S.: Optimal vibration control with modal positive position feedback. Optim. Control Appl. Methods 17, 141–149 (1996)10.1002/(SICI)1099-1514(199604/06)17:2<141::AID-OCA566>3.0.CO;2-D ↗
7. Baz, A., Ro, J.: Vibration control of plates with active constrained layer damping. Smart Mater. Struct. 5, 135–144 (1996)
8. Baz, A., Tempia, A.: Active piezoelectric damping composites. Sens. Actuators A 112(2–3), 340–350 (2004)10.1016/j.sna.2004.01.021 ↗
9. Benveniste, Y., Dvorak, G.J.: Uniform fields and universal relations in piezoelectric composites. J. Mech. Phys. Solids 40(6), 1295–1312 (1992)10.1016/0022-5096(92)90016-U ↗
10. Berger, H., Gabbert, U., Maugin, G.A.: Unit cell models of piezoelectric fiber composites for numerical and analytical calculation of effective properties. Smart Mater. Struct. 15(2), 451–458 (2006)10.1088/0964-1726/15/2/026 ↗
11. Bruant, I., Gallimard, L., Nikoubar, S.: Optimal piezoelectric actuator and sensor location for active vibration control using genetic algorithm. J. Sound Vib. 329(10), 1615–1635 (2010)10.1016/j.jsv.2009.12.001 ↗
12. Caruso, G., Galeani, S., Menini, L.: Active control of an elastic plate using multiple piezoelectric sensors and actuators. Simul. Model. Pract. Theory 11(5–6), 403–419 (2003)10.1016/S1569-190X(03)00056-X ↗
13. Chantalakhana, C., Stanway, R.: Active constrained layer damping of clamped–clamped plate vibrations. J. Sound Vib. 241(5), 755–777 (2001)10.1006/jsvi.2000.3317 ↗
14. Chen, F., Hong, M., Song, M., Cui, H.: Optimal control of a beam with discontinuously distributed piezoelectric sensors and actuators. J. Mar. Sci. Appl. 11, 44–51 (2012)10.1007/s11804-012-1104-7 ↗
15. Cook, R.D., Malkus, D.S., Plesha, M.E., Witt, R.J.: Concepts and Applications of Finite Element Analysis. Wiley, Singapore (2003)
16. Crawley, E.F., Luis, J.D.: Use of piezoelectric actuators as elements of intelligent structures. AIAA J. 25(10), 1371–1385 (1987)10.2514/3.9792 ↗
17. Dong, S., Tong, L.: Vibration control of plates using discretely distributed piezoelectric quasi-modal actuators/sensors. AIAA J. 39, 1766–1772 (2001)10.2514/2.1507 ↗
18. Dunn, M.L., Taya, M.: Micromechanics predictions of the effective electroelastic moduli of piezoelectric composites. Int. J. Solids Struct. 30, 161–175 (1993)10.1016/0020-7683(93)90058-F ↗
19. Fu, Y., Wang, J., Mao, Y.: Nonlinear vibration and active control of functionally graded beams with piezoelectric sensors and actuators. J. Intell. Mater. Syst. Struct. 22(18), 2093–2102 (2011)10.1177/1045389X11425277 ↗
20. Gao, J.X., Shen, Y.P.: Active control of geometrically nonlinear transient vibration of composite plates with piezoelectric actuators. J. Sound Vib. 264, 911–928 (2003)10.1016/S0022-460X(02)01189-6 ↗
21. Gatti, G., Brennan, M.J., Gardonio, P.: Active damping of a beam using a physically collocated accelerometer and piezoelectric patch actuator. J. Sound Vib. 303(3–5), 798–813 (2007)10.1016/j.jsv.2007.02.006 ↗
22. Gu, Y., Clark, R.L., Fuller, C.R.: Experiments on active control of plate vibration using piezoelectric actuators and polyvinylidene fluoride (PVDF) modal sensors. ASME J. Vib. Acoust. 116, 303–308 (1994)10.1115/1.2930429 ↗
23. Hanagud, S., Obal, M.W., Calise, A.J.: Optimal vibration control by the use of piezoceramic sensors and actuators. J. Guid. Control Dyn. 15(5), 1199–1206 (1992)10.2514/3.20969 ↗
24. Kant, T., Babu, C.S.: Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models. Compos. Struct. 49(1), 77–85 (2000)10.1016/S0263-8223(99)00127-0 ↗
25. Kapania, R.K., Singhvi, S.: Free vibration analysis of generally laminated tapered skew plates. Compos. Eng. 2(3), 197–212 (1992)10.1016/0961-9526(92)90004-P ↗
26. Krishna Reddy, A.R., Palaninathan, R.: Buckling of laminated skew plates. Int. J Thin Walled Struct. 22, 241–259 (1995)10.1016/0263-8231(94)00033-V ↗
27. Krishna Reddy, A.R., Palaninathan, R.: Free vibration of skew laminate. Comput. Struct. 70(4), 415–423 (1999)10.1016/S0045-7949(98)00166-7 ↗
28. Kugi, A., Schlacher, K., Irschik, H.: Infinite-dimensional control of nonlinear beam vibrations by piezoelectric actuator and sensor layers. Nonlinear Dyn. 19(1), 71–91 (1999)10.1023/A:1008393904114 ↗
29. Kumar, N., Singh, S.P.: Vibration control of curved panel using smart damping. Mech. Syst. Signal Process. 30, 232–247 (2012)10.1016/j.ymssp.2011.12.012 ↗
30. Kwak, M.K., Heo, S., Jeong, M.: Dynamic modeling and active vibration controller design for a cylindrical shell equipped with piezoelectric sensors and actuators. J. Sound Vib. 321(3–5), 510–524 (2009)10.1016/j.jsv.2008.09.051 ↗
31. Lee, S.-Y.: Free vibration of laminated composite skew plates with central cutouts. Struct. Eng. Mech. 31(5), 587–603 (2009)10.12989/sem.2009.31.5.587 ↗
32. Lee, C.K., Chiang, W.W., Sulivan, O.: Piezoelectric modal sensor/actuator pairs for critical active damping vibration control. J. Acoust. Soc. Am. 90(1), 374–384 (1991)10.1121/1.401260 ↗
33. Li, F.M., Kishimoto, K., Wang, Y.S., Chen, Z.B., Huang, W.H.: Vibration control of beams with active constrained layer damping. Smart Mater. Struct. 17(6), Article no. 065036 (2008)10.1088/0964-1726/17/6/065036 ↗
34. Lim, Y.-H., Varadan, V.V., Varadan, K.V.: Closed loop finite element modeling of active constrained layer damping in the time domain analysis. Smart Mater. Struct. 11, 89–97 (2002)10.1088/0964-1726/11/1/310 ↗
35. Malekzadeh, P.: Differential quadrature large amplitude free vibration analysis of laminated skew plates based on FSDT. Compos. Struct. 83(2), 189–200 (2008)10.1016/j.compstruct.2007.04.007 ↗
36. Margaretha, J.L., Daniel, J.I., William, R.S.: Hybrid damping models using the Golla–Hughes–McTavish method with internally balanced model reduction and output feedback. Smart Mater. Struct. 9, 362–371 (2000)10.1088/0964-1726/9/3/318 ↗
37. McTavish, D.J., Hughes, P.C.: Modeling of linear viscoelastic space structures. J. Vib. Acoust. 115, 103–113 (1993)10.1115/1.2930302 ↗
38. Pai, P.F., Nafeh, A.H., Oh, K., Mook, D.T.: A refined nonlinear model of composite plates with integrated piezoelectric actuators and sensors. Int. J. Solids Struct. 30, 1603–1630 (1993)10.1016/0020-7683(93)90193-B ↗
39. Panda, S., Ray, M.C.: Active constrained layer damping of geometrically nonlinear vibrations of functionally graded plates using piezoelectric fiber-reinforced composites. Smart Mater. Struct. 17, 1–15 (2008)10.1088/0964-1726/17/2/025012 ↗
40. Piezocomposites. Material Systems Inc., Littleton, USA
41. Prathap, G., Varadan, T.K.: Non-linear flexural vibrations of anisotropic skew plates. J. Sound Vib. 63, 315–323 (1979)10.1016/0022-460X(79)90676-X ↗
42. Ray, M.C., Pradhan, A.K.: On the use of vertically reinforced 1–3 piezoelectric composites for hybrid damping of laminated composite plates. Mech. Adv. Mater. Struct. 14(4), 245–261 (2007)10.1080/15376490600795683 ↗
43. Ray, M.C., Pradhan, A.K.: Performance of vertically and obliquely reinforced 1–3 piezoelectric composites for active damping of laminated composite shell. J. Sound Vib. 315, 816–835 (2008)10.1016/j.jsv.2008.02.012 ↗
44. Ray, M.C., Reddy, J.N.: Optimal control of thin circular cylindrical shells using active constrained layer damping treatment. Smart Mater. Struct. 13, 64–72 (2004)10.1088/0964-1726/13/1/008 ↗
45. Ray, M.C., Samanta, B., Bhattacharyya, R.: Finite element model for active control of intelligent structures. AIAA J. 34(9), 1885–1893 (1996)10.2514/3.13322 ↗
46. Reddy, J.N.: Mechanics of Laminated Composite Plates: Theory and Analysis. CRC Press, Boca Raton (1997)
47. Ro, J., Baz, A.: Optimum placement and control of active constrained layer damping using modal strain energy approach. J. Vib. Control 8, 861–876 (2002)10.1177/107754602029204 ↗
48. Ruan, X., Chou, T.W.: A 3-D connectivity model for effective piezoelectric properties of yarn composites. J. Compos. Mater. 36(14), 1693–1708 (2002)10.1177/0021998302036014164 ↗
49. Sakthivel, M., Arockiarajan, A.: An analytical model for predicting thermo–electro-mechanical response of 1–3 piezoelectric composites. Comput. Mater. Sci. 48(4), 759–767 (2010)10.1016/j.commatsci.2010.03.027 ↗
50. Sarangi, S.K., Ray, M.C.: Smart damping of geometrically nonlinear vibrations of laminated composite beams using vertically reinforced 1–3 piezoelectric composites. Smart Mater. Struct. 19, 075020 (2010)10.1088/0964-1726/19/7/075020 ↗
51. Sarangi, S.K., Ray, M.C.: Active damping of geometrically nonlinear vibrations of laminated composite plates using vertically reinforced 1–3 piezoelectric composites. Acta Mech. 22, 363–380 (2011)10.1007/s00707-011-0531-x ↗
52. Singha, M.K., Daripa, R.: Nonlinear Vibration of symmetrically laminated composite plates by finite element method. Int. J. Non-linear Mech. 42, 1144–1152 (2007)10.1016/j.ijnonlinmec.2007.08.001 ↗
53. Smith, W.A., Auld, B.A.: Modelling 1–3 composite piezoelectrics: thickness mode oscillations. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 31, 40–47 (1991)10.1109/58.67833 ↗
54. Topal, U.: Frequency optimization of laminated skew plates. Mater. Des. 30(8), 3180–3185 (2009)10.1016/j.matdes.2008.11.007 ↗
55. Vasques, C.M., Mace, B.R., Gardonio, P., Rodrigues, J.D.: Arbitrary active constrained layer damping treatments on beams: finite element modeling and experimental validation. Comput. Struct. 84(22–23), 1384–1401 (2006)10.1016/j.compstruc.2006.01.035 ↗
56. Wang, S.: Buckling analysis of skew fibre-reinforced composite laminates based on first-order shear deformation plate theory. Compos. Struct. 37(1), 5–19 (1997a)10.1016/S0263-8223(97)00050-0 ↗
57. Wang, S.: Free vibration analysis of skew fibre-reinforced composite laminates based on first-order shear deformation plate theory. Compos. Struct. 63(3), 525–538 (1997b)10.1016/S0045-7949(96)00357-4 ↗
58. Yuan, L., Xiang, Y., Huang, Y., Lu, J.: A semi-analytical method and the circumferential dominant modal control of circular cylindrical shells with active constrained layer damping treatment. Smart Mater. Struct. 19(2), Article No. 025010 (2010)10.1088/0964-1726/19/2/025010 ↗
59. Zhang, X., Erdman, A.G.: Optimal placement of piezoelectric sensors and actuators for controlled flexible linkage mechanisms. ASME J. Vib. Acoust. 128(2), 256–260 (2006)10.1115/1.2159043 ↗