Optimal design of the functional grading in elastic wear-resisting bearings: a simple analytical model
Source abstract
Abstract
A one-dimensional wear contact problem for a functionally-graded elastic coating attached to a rigid base is considered under the condition of a constant pre-strain with the effect of the coating thickness evolution taken into account. It is assumed that the wear coefficient is inversely proportional to the material stiffness at the bearing surface. The presented analysis is primarily given in the dimensionless form in order to illustrate qualitative features of the model behavior. It is shown that the wearing-out period essentially depends on the wear coefficient variation with depth. It is found that the optimal design of FGM bearings is constrained by the maximum of the grading gradient of material properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Tribology and Wear Analysis · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Aizikovich, S.M., Mitrin, B.I., Seleznev, N.M., Wang, Y.-C., Volkov, S.S.: Influence of a soft FGM interlayer on contact stresses under a beam on an elastic foundation. Struct. Eng. Mech. 58(4), 613–625 (2016)10.12989/sem.2016.58.4.613 ↗
2. Aleksandrov, V.M., Kovalenko, E.V.: Plane contact problems of the theory of elasticity for nonclassical regions in the presence of wear. J. Appl. Mech. Tech. Phys. 21(3), 421–427 (1980)10.1007/BF00920786 ↗
3. Andresen, H., Hills, D.A., Vazquez, J.: Closed-form solutions for tilted three-part piecewise-quadratic half-plane contacts. Int. J. Mech. Sci. 150, 127–134 (2019)10.1016/j.ijmecsci.2018.09.024 ↗
4. Archard, J.F.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24(8), 981–988 (1953)10.1063/1.1721448 ↗
5. Argatov, I.I., Chai, Y.S.: Effective wear coefficient and wearing-in period for a functionally graded wear-resisting punch. Acta Mechanica 230(6), 2295–2307 (2019)10.1007/s00707-019-2366-9 ↗
6. Argatov, I., Chai, Y.S.: Contact geometry adaptation in fretting wear: a constructive review. Front. Mech. Eng. 6, 51 (2020a)10.3389/fmech.2020.00051 ↗
7. Argatov, I.I., Chai, Y.S.: A note on optimal design of contact geometry in fretting wear. Int. J. Mech. Mater. Des. 16, 415–422 (2020b)10.1007/s10999-019-09467-9 ↗
8. Argatov, I.I., Chai, Y.S.: Wear contact problem with friction: Steady-state regime and wearing-in period. Int. J. Solids Struct. 193, 213–221 (2020c)10.1016/j.ijsolstr.2020.02.019 ↗
9. Argatov, I.I., Chai, Y.S.: Fretting wear with variable coefficient of friction in gross sliding conditions. Tribol. Int. 153, 106555 (2021)10.1016/j.triboint.2020.106555 ↗
10. Argatov, I.I., Fadin, Y.A.: A macro-scale approximation for the running-in period. Tribol. Lett. 42(3), 311–317 (2011)10.1007/s11249-011-9775-9 ↗
11. Argatov, I., Mishuris, G.: Contact Mechanics of Articular Cartilage Layers. Springer, Cham (2016)
12. Argatov, I., Tato, W.: Asymptotic modeling of reciprocating sliding wear-comparison with finite-element simulations. Eur. J. Mech. A Solids 34, 1–11 (2012)10.1016/j.euromechsol.2011.11.008 ↗
13. Bae, J.W., Lee, C.Y., Chai, Y.S.: Three dimensional fretting wear analysis by finite element substructure method. Int. J. Precis. Eng. Manuf. 10(4), 63–69 (2009)10.1007/s12541-009-0072-6 ↗
14. Banichuk, N.V., Ragnedda, F., Serra, M.: Some optimization problems for bodies in quasi-steady state wear. Mech. Based Des. Struct. Mach. 38(4), 430–439 (2010)10.1080/15397734.2010.483574 ↗
15. Blau, P.J.: A multi-stage wear model for grid-to-rod fretting of nuclear fuel rods. Wear 313(1–2), 89–96 (2014)10.1016/j.wear.2014.02.016 ↗
16. Blau, P.J.: A microstructure-based wear model for grid-to-rod fretting of clad nuclear fuel rods. Wear 426, 750–759 (2019)10.1016/j.wear.2019.01.056 ↗
17. Chai, Y.S., Lee, C.Y., Bae, J.W., Lee, S.Y., Hwang, J.K.: Finite element analysis of fretting wear problems in consideration of frictional contact. Key Eng. Mater. 297–300, 1406–1411 (2005)10.4028/www.scientific.net/KEM.297-300.1406 ↗
18. Erbaş, B., Aydın, Y.E., Borodich, F.M.: Indentation of thin elastic films glued to rigid substrate: Asymptotic solutions and effects of adhesion. Thin Solid Films 683, 135–143 (2019)10.1016/j.tsf.2019.05.038 ↗
19. Feppon, F., Sidebottom, M.A., Michailidis, G., Krick, B.A., Vermaak, N.: Efficient steady-state computation for wear of multimaterial composites. J. Tribol. 138(3),(2016)10.1115/1.4031993 ↗
20. Fouvry, S., Liskiewicz, T., Kapsa, P., Hannel, S., Sauger, E.: An energy description of wear mechanisms and its applications to oscillating sliding contacts. Wear 255(1–6), 287–298 (2003)10.1016/S0043-1648(03)00117-0 ↗
21. Galin, L.A.: Contact problems of the theory of elasticity in the presence of wear. J. Appl. Math. Mech. 40(6), 931–936 (1976)10.1016/0021-8928(76)90132-5 ↗
22. Guler, M.A., Erdogan, F.: Contact mechanics of graded coatings. Int. J. Solids Struct. 41(14), 3865–3889 (2004)10.1016/j.ijsolstr.2004.02.025 ↗
23. Guler, M.A., Erdogan, F.: Contact mechanics of two deformable elastic solids with graded coatings. Mech. Mater. 38(7), 633–647 (2006)10.1016/j.mechmat.2005.11.006 ↗
24. Guo, X., Lai, P., Li, L., Tang, L., Zhang, L.: Progress in studying the fretting wear/corrosion of nuclear steam generator tubes. Ann. Nucl. Energy 144, 107556 (2020)10.1016/j.anucene.2020.107556 ↗
25. Jo, J.C., Jhung, M.J., Kim, W.S., Kim, H.J.: Life estimation of PWR steam generator U-tubes subjected to foreign object-induced fretting wear. Nucl. Technol. 152(1), 118–128 (2005)10.13182/NT05-A3664 ↗
26. Jobin, K.J., Abhilash, M.N., Murthy, H.: A simplified analysis of 2D sliding frictional contact between rigid indenters and FGM coated substrates. Tribol. Int. 108, 174–185 (2017)10.1016/j.triboint.2016.09.021 ↗
27. Kaplunov, J., Prikazchikov, D., Sultanova, L.: Elastic contact of a stiff thin layer and a half-space. Zeitschrift für angewandte Mathematik und Physik 70(1), 1–17 (2019)10.1007/s00033-018-1068-9 ↗
28. Kauzlarich, J.J., Williams, J.A.: Archard wear and component geometry. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 215(4), 387–403 (2001)10.1243/1350650011543628 ↗
29. Ke, L.L., Wang, Y.S.: Fretting contact with finite friction of a functionally graded coating with arbitrarily varying elastic modulus. Part 1: normal loading. J. Strain Anal. Eng. Des. 42(5), 293–304 (2007)10.1243/03093247JSA282 ↗
30. Kim, H.-K., Lee, Y.-H.: Influence of contact shape and supporting condition on tube fretting wear. Wear 255(7–12), 1183–1197 (2003)10.1016/S0043-1648(03)00068-1 ↗
31. Kim, H.-K., Lee, Y.-H., Lee, K.-H.: On the geometry of the fuel rod supports concerning a fretting wear failure. Nucl. Eng. Des. 238(12), 3321–3330 (2008)10.1016/j.nucengdes.2008.08.010 ↗
32. Kim, J.H., Park, J.M., Park, J.K., Jeon, K.L.: Sliding wear and friction behavior of zirconium alloy with heat-treated Inconel718. Nucl. Eng. Des. 269, 66–71 (2014)10.1016/j.nucengdes.2013.08.008 ↗
33. Kovalenko, E.V.: Calculation of wear for a plain bearing with a thin porous elastic shell. J. Appl. Mech. Tech. Phys. 32(5), 814–819 (1991)10.1007/BF00851959 ↗
34. Kragelsky, I.V., Dobychin, M.N., Kombalov, V.S.: Friction and Wear: Calculation Methods. Pergamon Press, Oxford (1982)
35. Lee, C.Y., Tian, L.S., Bae, J.W., Chai, Y.S.: Application of influence function method on the fretting wear of tube-to-plate contact. Tribol. Int. 42(6), 951–957 (2009)10.1016/j.triboint.2009.01.005 ↗
36. Lee, Y.-H., Kim, I.-H., Kim, H.-K., Kim, H.-G.: Role of ZrO2 oxide layer on the fretting wear resistance of a nuclear fuel rod. Tribol. Int. 145, 106146 (2020)10.1016/j.triboint.2019.106146 ↗
37. Lorenzo-Martin, C., Ajayi, O., Hartman, K., Bhattacharya, S., Yacout, A.: Effect of Al2O3 coating on fretting wear performance of Zr alloy. Wear 426, 219–227 (2019)10.1016/j.wear.2018.12.024 ↗
38. Ma, L., Eom, K., Geringer, J., Jun, T.-S., Kim, K.: Literature review on fretting wear and contact mechanics of tribological coatings. Coatings 9(8), 501 (2019)10.3390/coatings9080501 ↗
39. Mei, J.N., Xue, F., Huang, L., Wang, Z.X., Zhang, G.D., Shu, G.G., Li, J.S., Fu, H.Z.: Finite element analysis of fretting wear for nuclear Inconel 690 Alloy. Adv. Mater. Res. 772, 77–82 (2013)10.4028/www.scientific.net/AMR.772.77 ↗
40. Páczelt, I., Baksa, A., Mróz, Z.: Contact optimization problems for stationary and sliding conditions. In: Mathematical Modeling and Optimization of Complex Structures, pp. 281–312. Springer (2016)10.1007/978-3-319-23564-6_16 ↗
41. Pasternak, E., Dyskin, A. & Karachevtseva, I. ( 2020) , Oscillations in sliding with dry friction. friction reduction by imposing synchronised normal load oscillations. Int. J. Eng. Sci. 154, 10331310.1016/j.ijengsci.2020.103313 ↗
42. Preston, F.W.: The theory and design of plate glass polishing machines. J. Glass Technol. 11(44), 214–256 (1927)
43. Sedova, O., Pronina, Y.: The thermoelasticity problem for pressure vessels with protective coatings, operating under conditions of mechanochemical corrosion. Int. J. Eng. Sci. 170, 103589 (2022)10.1016/j.ijengsci.2021.103589 ↗
44. Shi, Y., Li, Y., Liu, J., Yuan, Z.: Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel. Opt. Laser Technol. 99, 256–270 (2018)10.1016/j.optlastec.2017.09.010 ↗
45. Suh, N.P., Sridharan, P.: Relationship between the coefficient of friction and the wear rate of metals. Wear 34(3), 291–299 (1975)10.1016/0043-1648(75)90097-6 ↗
46. Willert, E., Dmitriev, A.I., Psakhie, S.G., Popov, V.L.: Effect of elastic grading on fretting wear. Sci. Rep. 9(1), 1–8 (2019)10.1038/s41598-019-44269-1 ↗
47. Zhang, L., Lai, P., Liu, Q., Zeng, Q., Lu, J., Guo, X.: Fretting wear behavior of zirconium alloy in B-Li water at $$300^\circ $$C. J. Nucl. Mater. 499, 401–409 (2018)10.1016/j.jnucmat.2017.12.003 ↗