Design and Implementation of Spring Cable Shaping Method Based on Fuzzy Control
Source abstract
Abstract
In order to improve the production efficiency and elastic quality of spring cable, and meet the market demand of automatic mass production, based on the market research and experimental analysis of common spring cable shaping methods, a rapid shaping method of coil bar current heating spring cable is innovatively proposed. After the spring cable is wound on the coil bar once, the coil bar is directly heated to realize the spring wire temperature rising and setting. The process temperature is input from the man-machine interface, and the temperature control is based on a fuzzy algorithm, which is automatically adjusted by PLC. The experimental results show that, compared with the traditional sizing method, the current heating method proposed in this paper can greatly shorten the product sizing time and has good sizing effect, which can well meet the market requirement of high-quality mass production of spring cable.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Intelligent Manufacturing, Yangzhou Polytechnic Institute, Yangzhou 225127, China
College of Automation Engineering, Nanjing University of Aeronautics & Astronautic, Nanjing 211106, China
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212000, China
School of Mechanical Engineering, Yangzhou University, Yangzhou 225009, China
Funding
Natural Science Research Project of Universities of Jiangsu Province
References (15)
Show source-provided references
1. Analysis of the bending behavior of a cable structure under microgravity10.1016/j.ijmecsci.2016.05.013 ↗
2. Finite element modeling of the elastoplastic axial-torsional response of helical constructions to traction loads10.1016/j.ijmecsci.2017.09.002 ↗
3. Temperature controlled tensiometry using droplet microfluidics10.1039/C6LC01384H ↗
4. The concept of making on-chip thermal cycler for RT-PCR using conjugate heat trans-fer in diverging microchannel10.1007/s41403-020-00108-8 ↗
5. Adaptive Model Predictive Control of Module Temperature in Photovoltaic Systems10.1021/acs.iecr.0c03787 ↗
6. An Intelligent Compensation Method of Dynamic Coupling Error for Hydrostatic Guideway
7. A robust deadbeat predictive controller with delay compensation based on compo-site sliding mode observer for PMSMs10.1109/TPEL.2021.3063226 ↗
8. Sun, X., Zhang, Y., Lei, G., Guo, Y., and Zhu, J. (2021). An Improved Deadbeat Predictive Stator Flux Control with Reduced-Order Disturbance Observer for In-Wheel PMSMs. IEEE/ASME Trans. Mechatron.10.1109/TMECH.2021.3068973 ↗
9. Speed Sensorless Model Predictive Current Control Based on Finite Position Set for PMSHM Drives10.1109/TTE.2021.3081436 ↗
10. Discussion on Optimality Conditions of Fuzzy Optimal Control Problems10.1142/S0218488521500318 ↗
11. Fuzzy Logic Controller Optimized by MABSA for DC Servo Motor on Physical Experiment10.1007/978-981-33-4597-3_51 ↗
12. Distributed adaptive fuzzy control approach for prescribed-time containment of uncertain nonlinear multi-agent systems with unknown hysteresis10.1007/s11071-021-06304-7 ↗
13. Dissipative Event-Triggered Fuzzy Control of Truck-Trailer Systems
14. Yang, H., Zhang, Y., Liang, J., Zhang, N., and Paul, W. (2017, January 1–5). A robust deadbeat predictive power control with sliding mode disturbance observer for PWM rectifiers. Proceedings of the 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA.10.1109/ECCE.2017.8096786 ↗
15. Fuzzy Tuned PID Controller for Envisioned Agricultural Manipulator10.1007/s11633-021-1280-5 ↗