Dynamic Analysis of the Complex Motion of Three-Section Cudgel in Wushu Sports
Source abstract
Abstract
Purpose: To provide some suggestions on how to effectively master these movements during training. Methods: The dynamics method and ABAQUS simulation analysis were used to analyze the two technical movements of the three-section cudgels: wrestling cudgels and retrieving cudgels. Results: In the process of wrestling the cudgel, the best effect is achieved when the height of the cudgel holding hand is between 70 cm and 80 cm from the ground. The maximum height of the rebound was very similar with different initial angular velocities, at 4.5–9 cm. The initial angular velocities caused significant impact to the horizontal movement of cudgel at 8 s. By excluding the errors, the horizontal movement of cudgel increased approximately linearly with the increase of the initial angular velocity. Conclusions: When the height between held cudgel and the ground was controlled at 1.5 times the height of the middle section, the rebound of the tail section was the least. When completing the movement of three-section cudgel, the cudgel body should be in the same plane perpendicular to the ground and to better retrieve the three-section cudgel. The main factor affecting the cudgel wrestling was the height between the cudgel holder and the ground.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Winter Sports Injuries and Performance · Sports Dynamics and Biomechanics · Human Motion and Animation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Public Sports and the Arts Department, Zhejiang University, Hangzhou 310058, China
Institute of Biophysics, Chinese Academy of Sciences, Beijing 100101, China
School of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
Department of Physical Education and Health, Peking Sports University, Beijing 100091, China
Department of Sports Science, College of Education, Zhejiang University, Hangzhou 310058, China
References (30)
Show source-provided references
1. The historical evolution of two-section stick and the formation of modern technique system
2. Wushu equipment—The cultural connotation of stick and Whip
3. The study of martial arts Instruments in the Northern and Southern Dynasties
4. Eighteen Martial Artsof Martial Arts in Song Dynasty
5. Zheng, H., and Chuan, K. (2013). The influence of Zhao Kuangyin and his Gunshu on the Development of Sports in Northern Song Dynasty. Lantai World, 70–71.
6. Wang, D., Lin, X.-M., Kulmala, J.-P., Petsola, A.J., and Gao, Y. (2021). Can the Functional Movement Screen Method Identify Previously Injured Wushu Athletes?. Int. J. Environ. Res. Public Health, 18.10.3390/ijerph18020721 ↗
7. Whip rod—Introduction to wushu equipment
8. Beer, F.P., and Johnton, E.R. (1992). Mechanics of Materials, McGraw-Hill. [2nd ed.].
9. Contacts in multibody systems10.1016/S0021-8928(00)00107-6 ↗
10. Modeling the Rocking and Sliding of Free-Standing Objects Using Rigid Body Dynamics10.1061/(ASCE)EM.1943-7889.0001739 ↗
11. Peters, B. (2017). Collision theory. Reaction Rate Theory and Rare Events Simulations, Elsevier.10.1016/B978-0-44-456349-1.00006-4 ↗
12. Stanford, A.L., and Tanner, J.M. (1985). Momentum and Collisions. Physics for Students of Science and Engineering, Academic Press.10.1016/B978-0-12-663380-1.50009-4 ↗
13. Numerical implementation of the exact dynamics of free rigid bodies10.1016/j.jcp.2006.11.019 ↗
14. A review of continuous contact-force models in multibody dynamics10.1016/j.ijmecsci.2018.07.010 ↗
15. Finite element analysis of flexible multibody systems with fuzzy parameters10.1016/S0045-7825(97)00297-1 ↗
16. Equations of motion of the rigid body
17. Experimental validation of a complex, large-scale, rigid-body mechanism10.1016/j.engstruct.2011.12.014 ↗
18. An open-source ABAQUS implementation of the scaled boundary finite element method to study interfacial problems using polyhedral meshes10.1016/j.cma.2021.113766 ↗
19. Complex mode superposition method for distributed parameter systems with nonclassical damping
20. A direct method for solving a class of nonlinear partial differential equations
21. Dynamics of structures undergoing gross motion and nonlinear deformations: A multibody approach10.1016/0045-7949(95)00349-5 ↗
22. Comparison of second-order serendipity and Lagrange tetrahedral elements for nonlinear explicit methods10.1016/j.finel.2021.103532 ↗
23. A semi-explicit algorithm for solving multibody contact dynamics with large deformation10.1016/j.ijnonlinmec.2018.05.001 ↗
24. A finite element method for a class of contact-impact problems10.1016/0045-7825(76)90018-9 ↗
25. Asynchronous variational contact mechanics10.1016/j.cma.2011.03.010 ↗
26. Time-stepping for three-dimensional rigid body dynamics10.1016/S0045-7825(98)00380-6 ↗
27. The physical demands of mixed martial arts: A narrative review using the ARMSS model to provide a hierarchy of evidence10.1080/02640414.2020.1802093 ↗
28. On plane-symmetric rigid-body motions10.1007/s00022-020-00543-6 ↗
29. The development of the dynamics of rigid body with state variables
30. Analysis of the failure process by using the Lattice Discrete Element Method in the Abaqus environment10.1016/j.tafmec.2020.102563 ↗