journal article·2021-06-30Open access

Numerical Investigation of the Effect of Air Leaking into the Working Fluid on the Performance of a Steam Ejector

He Li, Xiaodong Wang, Jiuxin Ning, Pengfei Zhang, Hailong Huang

Applied Sciences· Volume 11· Issue 13

Abstract

This paper investigated the effect of air leaking into the working fluid on the performance of a steam ejector. A simulation of the mixing of air into the primary and secondary fluids was performed using CFD. The effects of air with a 0, 0.1, 0.3 and 0.5 mass fraction on the entrainment ratio and internal flow structure of the steam ejector were studied, and the coefficient distortion rates for the entrainment ratios under these air mass fractions were calculated. The results demonstrated that the air modified the physical parameters of the working fluid, which is the main reason for changes in the entrainment ratio and internal flow structure. The calculation of the coefficient distortion rate of the entrainment ratio illustrated that the air in the primary fluid has a more significant impact on the change in the entrainment ratio than that in the secondary fluid under the same air mass fraction. Therefore, the air mass fraction in the working fluid must be minimized to acquire a precise entrainment ratio. Furthermore, this paper provided a method of inspecting air leakage in the experimental steam ejector refrigeration system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Refrigeration and Air Conditioning Technologies · Hydraulic and Pneumatic Systems · Advanced Sensor Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China

Funding

National Natural Science Foundation of China

References (40)

Show source-provided references
1. Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD results10.1016/j.ijthermalsci.2006.10.014 ↗
2. A new ejector theory applied to steam jet refrigeration10.1021/i260064a003 ↗
3. A 1-D analysis of ejector performance10.1016/S0140-7007(99)00004-3 ↗
4. Shock circle model for ejector performance evaluation10.1016/j.enconman.2007.03.024 ↗
5. Physical modeling of thermo-compressor for desalination applications10.1016/j.desal.2017.03.004 ↗
6. An experimental investigation of a steam ejector refrigerator: The analysis of the pressure profile along the ejector10.1016/j.applthermaleng.2003.07.003 ↗
7. Experimental studies of a steam jet refrigeration cycle: Effect of the primary nozzle geometries to system performance10.1016/j.expthermflusci.2011.01.001 ↗
8. Experimental and numerical analysis of a variable area ratio steam ejector10.1016/j.ijrefrig.2010.12.020 ↗
9. CFD investigation on the flow structure inside thermo vapor compressor10.1016/j.energy.2009.12.002 ↗
10. Numerical investigation of the influences of mixing chamber geometries on steam ejector performance10.1016/j.desal.2014.09.002 ↗
11. The primary pseudo-shock pattern of steam ejector and its influence on pumping efficiency based on CFD approach10.1016/j.energy.2018.10.097 ↗
12. Numerical investigation of geometry parameters for design of high performance ejectors10.1016/j.applthermaleng.2008.04.025 ↗
13. Influence of geometrical factors on steam ejector performance—A numerical assessment10.1016/j.ijrefrig.2009.05.009 ↗
14. Numerical investigation on the effect of nozzle position for design of high performance ejector10.1016/j.applthermaleng.2017.07.085 ↗
15. Experimental and numerical investigations on the effect of suction chamber angle and nozzle exit position of a steam-jet ejector10.1016/j.energy.2018.09.010 ↗
16. A novel ejector with a bypass to enhance the performance10.1016/j.applthermaleng.2015.10.067 ↗
17. Design and numerical investigation of an adaptive nozzle exit position ejector in multi-effect distillation desalination system10.1016/j.energy.2017.08.104 ↗
18. Process investigation of different locations of thermo-compressor suction in MED-TVC plants10.1016/j.desal.2011.06.070 ↗
19. The spontaneously condensing phenomena in a steam-jet pump and its influence on the numerical simulation accuracy10.1016/j.ijheatmasstransfer.2012.04.028 ↗
20. Numerical assessment of steam nucleation on thermodynamic performance of steam ejectors10.1016/j.applthermaleng.2012.12.003 ↗
21. Effect of mixing on the performance of wet steam ejectors10.1016/j.energy.2015.10.082 ↗
22. CFD modeling of condensing steam ejectors: Comparison with an experimental test-case10.1016/j.ijthermalsci.2018.01.012 ↗
23. Non-equilibrium condensation of wet steam flow within high-pressure thermo-compressor10.1016/j.applthermaleng.2015.02.023 ↗
24. Two-fluid model with droplet size distribution for condensing steam flows10.1016/j.energy.2016.03.052 ↗
25. Experimental investigations on a two-phase jet pump used in desalination systems10.1016/j.desal.2006.03.546 ↗
26. Numerical and experimental investigation of performance of the liquid–gas and liquid jet pumps in desalination systems10.1016/j.desal.2011.03.029 ↗
27. Effect of water nano-droplet injection on steam ejector performance based on non-equilibrium spontaneous condensation: A droplet number study10.1016/j.applthermaleng.2020.116236 ↗
28. Experimental and numerical investigation of two phase ejector performance with the water injected into the induced flow10.1016/j.jandt.2020.01.001 ↗
29. Aphornratana, S. (1994). Theoretical and Experimental Investigation of a Combine Ejector-Absorption Refrigerator. [Ph.D. Thesis, University of Sheffield].
30. A one dimensional model for the determination of an ejector entrainment ratio10.1016/j.ijrefrig.2011.11.020 ↗
31. An Integrated Lumped Parameter-CFD approach for off-design ejector performance evaluation10.1016/j.enconman.2015.08.029 ↗
32. Computational fluid-dynamics modeling of supersonic ejectors: Screening of turbulence modeling approaches10.1016/j.applthermaleng.2017.02.011 ↗
33. CFD simulation on the boundary layer separation in the steam ejector and its influence on the pumping performance10.1016/j.energy.2018.10.195 ↗
34. Computational and experimental analysis of supersonic air ejector: Turbulence modeling and assessment of 3D effects10.1016/j.ijheatfluidflow.2015.08.003 ↗
35. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark10.1016/j.ijrefrig.2015.07.030 ↗
36. On the selection of a turbulence model for the simulation of steam ejectors using CFD10.1093/ijlct/ctx007 ↗
37. Ansys, I. (2013). Ansys-Fluent 15.0 User’s Guide, ANSYS, Inc.
38. Mixing layer effects on the entrainment ratio in steam ejectors through ideal gas computational simulations10.1016/j.energy.2015.12.027 ↗
39. Two-dimensional shear-layer entrainment10.2514/3.9525 ↗
40. Turbulent shear-layer mixing: Growth-rate compressibility scaling10.1017/S0022112099006977 ↗