Influence of porosity on the flexural and vibration response of gradient plate using nonpolynomial higher-order shear and normal deformation theory
Source abstract
Abstract
The present article deals with flexural and vibration response of functionally graded plates with porosity. The basic formulation is based on the recently developed non-polynomial higher-order shear and normal deformation theory by the authors’. The present theory contains only four unknowns and also accommodate the thickness stretching effect. The effective material properties at each point are determined by two micromechanics models (Voigt and Mori–Tanaka scheme). The governing equations for FGM plates are derived using variational approach. Results have been obtained by employing a C0 continuous isoparametric Lagrangian finite element with eight degrees of freedom per node. Convergence and comparative study with the reported results in the literature, confirm the accuracy and efficiency of the present model and finite element formulation. The influence of the porosity, various boundary conditions, geometrical configuration and micromechanics models on the flexural and vibration behavior of FGM plates is examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Nonlocal and gradient elasticity in micro/nano structures · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Alipour, M.M., Shariyat, M., Shaban, M.: A semi-analytical solution for free vibration of variable thickness two-directional-functionally graded plates on elastic foundations. Int. J. Mech. Mater. Des. 6, 293–304 (2010). doi: 10.1007/s10999-010-9134-210.1007/s10999-010-9134-2 ↗
2. Ameur, M., Tounsi, A., Mechab, I., El Bedia, A.A.: A new trigonometric shear deformation theory for bending analysis of functionally graded plates resting on elastic foundations. KSCE J. Civ. Eng. 15, 1405–1414 (2011). doi: 10.1007/s12205-011-1361-z10.1007/s12205-011-1361-z ↗
3. Atmane, A.H., Tounsi, A., Bernard, F.: Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations. Int. J. Mech. Mater. Des. (2015). doi: 10.1007/s10999-015-9318-x10.1007/s10999-015-9318-x ↗
4. Atmane, H.A., Tounsi, A., Mechab, I., El Bedia, A.A.: Free vibration analysis of functionally graded plates resting on Winkler-Pasternak elastic foundations using a new shear deformation theory. Int. J. Mech. Mater. Des. 6, 113–121 (2010). doi: 10.1007/s10999-010-9110-x10.1007/s10999-010-9110-x ↗
5. Basset, A.B.: On the extension and flexure of cylindrical and spherical thin elastic shells. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 181, 433–480 (1890). doi: 10.1098/rsta.1890.000710.1098/rsta.1890.0007 ↗
6. Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R.R., Beg, O.Anwar: An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates. Compos. Part B Eng. 60, 274–283 (2014). doi: 10.1016/j.compositesb.2013.12.05710.1016/j.compositesb.2013.12.057 ↗
7. Benachour, A., Tahar, H.D., Atmane, H.A., Tounsi, A., Ahmed, M.S.: A four variable refined plate theory for free vibrations of functionally graded plates with arbitrary gradient. Compos. Part B Eng. 42, 1386–1394 (2011). doi: 10.1016/j.compositesb.2011.05.03210.1016/j.compositesb.2011.05.032 ↗
8. Carrera, E., Brischetto, S., Cinefra, M., Soave, M.: Effects of thickness stretching in functionally graded plates and shells. Compos. B Eng. 42, 123–133 (2011). doi: 10.1016/j.compositesb.2010.10.00510.1016/j.compositesb.2010.10.005 ↗
9. Chi, S.H., Chung, Y.L.: Mechanical behavior of functionally graded material plates under transverse load—Part I: analysis. Int. J. Solids Struct. 43, 3657–3674 (2006). doi: 10.1016/j.ijsolstr.2005.04.01110.1016/j.ijsolstr.2005.04.011 ↗
10. Ebrahimi, F., Zia, M.: Large amplitude nonlinear vibration analysis of functionally graded Timoshenko beams with porosities. Acta Astronaut. 116, 117–125 (2015). doi: 10.1016/j.actaastro.2015.06.01410.1016/j.actaastro.2015.06.014 ↗
11. Ferreira, A.J.M., Batra, R.C., Roque, C.M.C., Qian, L.F.F., Martins, P.A.L.S.: Static analysis of functionally graded plates using third-order shear deformation theory and a meshless method. Compos. Struct. 69, 449–457 (2005). doi: 10.1016/j.compstruct.2004.08.00310.1016/j.compstruct.2004.08.003 ↗
12. Gibson, L.J., Ashby, M.F., Karam, G.N., Wegst, U., Shercliff, H.R.: The mechanical properties of natural materials. II. Microstructures for mechanical efficiency. Proc. R. Soc. A Math. Phys. Eng. Sci. 450, 141–162 (1995). doi: 10.1098/rspa.1995.007610.1098/rspa.1995.0076 ↗
13. Grover, N., Singh, B.N., Maiti, D.K.: Analytical and finite element modeling of laminated composite and sandwich plates: an assessment of a new shear deformation theory for free vibration response. Int. J. Mech. Sci. 67, 89–99 (2013). doi: 10.1016/j.ijmecsci.2012.12.01010.1016/j.ijmecsci.2012.12.010 ↗
14. Gupta, A., Talha, M.: Recent development in modeling and analysis of functionally graded materials and structures. Prog. Aerosp. Sci. 79, 1–14 (2015). doi: 10.1016/j.paerosci.2015.07.00110.1016/j.paerosci.2015.07.001 ↗
15. Gupta, A., Talha, M.: An assessment of a non-polynomial based higher order shear and normal deformation theory for vibration response of gradient plates with initial geometric imperfections. Compos. B 107, 141–161 (2016). doi: 10.1016/j.compositesb.2016.09.07110.1016/j.compositesb.2016.09.071 ↗
16. Gupta, A., Talha, M., Chaudhari, V.K.: Natural frequency of functionally graded plates resting on elastic foundation using finite element method. Procedia Technol. 23, 163–170 (2016b). doi: 10.1016/j.protcy.2016.03.01310.1016/j.protcy.2016.03.013 ↗
17. Gupta, A., Talha, M., Seemann, W.: Free vibration and flexural response of functionally graded plates resting on Winkler-Pasternak elastic foundations using non-polynomial higher order shear and normal deformation theory. Mech. Adv. Mater. Struct. (2017). doi: 10.1080/15376494.2017.128545910.1080/15376494.2017.1285459 ↗
18. Gupta, A., Talha, M., Singh, B.N.: Vibration characteristics of functionally graded material plate with various boundary constraints using higher order shear deformation theory. Compos. B Eng. 94, 64–74 (2016a). doi: 10.1016/j.compositesb.2016.03.00610.1016/j.compositesb.2016.03.006 ↗
19. Hadji, L., Atmane, H.A., Tounsi, A., Mechab, I., Addabedia, E.A.: Free vibration of functionally graded sandwich plates using four-variable refined plate theory. Appl. Math. Mech. (English Edition) 32, 925–942 (2011). doi: 10.1007/s10483-011-1470-910.1007/s10483-011-1470-9 ↗
20. Jha, D.K., Kant, T., Singh, R.K.: Free vibration response of functionally graded thick plates with shear and normal deformations effects. Compos. Struct. 96, 799–823 (2013). doi: 10.1016/j.compstruct.2012.09.03410.1016/j.compstruct.2012.09.034 ↗
21. Kant, T., Owen, D.R.J., Zienkiewicz, O.C.: A refined higher-order C o plate bending element. Comput. Struct. 15, 177–183 (1982)10.1016/0045-7949(82)90065-7 ↗
22. Karama, M., Afaq, K.S., Mistou, S.: A new theory for laminated composite plates. Proc. Inst. Mech. Eng. Part L: J Mater. Des. Appl. 223, 53–62 (2009). doi: 10.1243/14644207JMDA18910.1243/14644207JMDA189 ↗
23. Kashtalyan, M.: Three-dimensional elasticity solution for bending of functionally graded rectangular plates. Eur. J. Mech. A/Solids 23, 853–864 (2004). doi: 10.1016/j.euromechsol.2004.04.00210.1016/j.euromechsol.2004.04.002 ↗
24. Kirchhoff GR: Uber das gleichgewicht und die bewegung einer elastischen Scheibe. J Reine Angew Math (Crelle’s J) 40, 51–88 (1850)10.1515/crll.1850.40.51 ↗
25. Koiter, W.T.: A consistent first approximation in the general theory of thin elastic shells. In Proceedings of First Symposium on the Theory of Thin Elastic Shells. North-Holland, Amsterdam (1959)
26. Lal, A., Jagtap, K.R., Singh, B.N.: Stochastic nonlinear bending response of functionally graded material plate with random system properties in thermal environment. Int. J. Mech. Mater. Des. 8, 149–167 (2012). doi: 10.1007/s10999-012-9183-910.1007/s10999-012-9183-9 ↗
27. Levinson, M.: An accurate simple theory of statics and dynamics of elastic plates. Mech. Res. Commun. 7, 343–350 (1980)10.1016/0093-6413(80)90049-X ↗
28. Lo, K.H., Christensen, R.M., Wu, E.M.: A high-order theory of plate deformation—part 2: laminated plates. J. Appl. Mech. 44, 669 (1977)10.1115/1.3424155 ↗
29. Magnucka-Blandzi, E.: Non-linear analysis of dynamic stability of metal foam circular plate. J. Theor. Appl. Mech. 48, 207–217 (2010)
30. Mantari, J.L., Guedes Soares, C.: A novel higher-order shear deformation theory with stretching effect for functionally graded plates. Compos. Part B Eng. 45, 268–281 (2013). doi: 10.1016/j.compositesb.2012.05.03610.1016/j.compositesb.2012.05.036 ↗
31. Mantari, J.L.L., Oktem, A.S.S., Guedes Soares, C.: Bending response of functionally graded plates by using a new higher order shear deformation theory. Compos Struct. 94, 714–723 (2012). doi: 10.1016/j.compstruct.2011.09.00710.1016/j.compstruct.2011.09.007 ↗
32. Matsunaga, H.: Stress analysis of functionally graded plates subjected to thermal and mechanical loadings. Compos. Struct. 87, 344–357 (2009). doi: 10.1016/j.compstruct.2008.02.00210.1016/j.compstruct.2008.02.002 ↗
33. Mechab, I., Mechab, B., Benaissa, S., Serier, B., Bachir Bouiadjra, B.: Free vibration analysis of FGM nanoplate with porosities resting on Winkler Pasternak elastic foundations based on two-variable refined plate theories. J. Braz. Soc. Mech. Sci. Eng. (2016). doi: 10.1007/s40430-015-0482-610.1007/s40430-015-0482-6 ↗
34. Mindlin, R.D.: Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. ASME J. Appl. Mech. 18, 31–38 (1951)10.1115/1.4010217 ↗
35. Mojdehi, A.R., Darvizeh, A.: Three dimensional static and dynamic analysis of thick functionally graded plates by the meshless local Petrov–Galerkin (MLPG) method. Engineering Analysis with … 35, 1168–1180 (2011)10.1016/j.enganabound.2011.05.011 ↗
36. Mori, T., Tanaka, K.: Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21, 571–574 (1973). doi: 10.1016/0001-6160(73)90064-310.1016/0001-6160(73)90064-3 ↗
37. Murthy, M. V. V.: An improved transverse shear deformation theory for laminated anisotropic plates. NASA Technical Paper 1903 (1981)
38. Nguyen, Tk: A higher-order hyperbolic shear deformation plate model for analysis of functionally graded materials. Int. J. Mech. Mater. Des. 11, 203–219 (2015). doi: 10.1007/s10999-014-9260-310.1007/s10999-014-9260-3 ↗
39. Pandya, B.N., Kant, T.: Finite element analysis of laminated composite plates using a higher-order displacement model. Compos. Sci. Technol. 32, 137–155 (1988). doi: 10.1016/0266-3538(88)90003-610.1016/0266-3538(88)90003-6 ↗
40. Prakash, T., Ganapathi, M.: Asymmetric flexural vibration and thermoelastic stability of FGM circular plates using finite element method. Compos. B Eng. 37, 642–649 (2006). doi: 10.1016/j.compositesb.2006.03.00510.1016/j.compositesb.2006.03.005 ↗
41. Qian, L.F., Batra, R.C., Chen, L.M.: Static and dynamic deformations of thick functionally graded elastic plates by using higher-order shear and normal deformable plate theory and meshless local Petrov-Galerkin method. Compos. B Eng. 35, 685–697 (2004). doi: 10.1016/j.compositesb.2004.02.00410.1016/j.compositesb.2004.02.004 ↗
42. Reddy, J.N.: A simple higher-order theory for laminated composite plates. J. Appl. Mech. 51, 745 (1984). doi: 10.1115/1.316771910.1115/1.3167719 ↗
43. Reddy, J.N.: Analysis of functionally graded plates. Int. J. Numer. Meth. Eng. 47, 663–684 (2000)10.1002/(SICI)1097-0207(20000110/30)47:1/3<663::AID-NME787>3.0.CO;2-8 ↗
44. Reissner, E.: The effect of transverse shear deformation on the bending of elastic plates. ASME J. Appl. Mech. 12, 68–77 (1945)
45. Soldatos, K.P.: A transverse shear deformation theory for homogeneous monoclinic plates. Acta Mech. 94, 195–220 (1992). doi: 10.1007/BF0117665010.1007/BF01176650 ↗
46. Talha, M., Singh, B.N.: Static response and free vibration analysis of FGM plates using higher order shear deformation theory. Appl. Math. Model. 34, 3991–4011 (2010). doi: 10.1016/j.apm.2010.03.03410.1016/j.apm.2010.03.034 ↗
47. Talha, M., Singh, B.N.: Thermo-mechanical buckling analysis of finite element modeled functionally graded ceramic-metal plates. Int. J. Appl. Mech. 3, 867–880 (2011a). doi: 10.1142/S175882511100127510.1142/S1758825111001275 ↗
48. Talha, M., Singh, B.N.: Nonlinear mechanical bending of functionally graded material plates under transverse loads with various boundary conditions. Int. J. Model. Simul. Sci. Comput. 2, 237–258 (2011b). doi: 10.1142/S179396231100045110.1142/S1793962311000451 ↗
49. Tamijani, A.Y., Kapania, R.K.: vibration analysis of curvilinearly-stiffened functionally graded plate using element free Galerkin method. Mech. Adv. Mater. Struct. 19, 100–108 (2012). doi: 10.1080/15376494.2011.57224010.1080/15376494.2011.572240 ↗
50. Thai, H.T., Choi, D.H.: Efficient higher-order shear deformation theories for bending and free vibration analyses of functionally graded plates. Arch. Appl. Mech. 83, 1755–1771 (2013). doi: 10.1007/s00419-013-0776-z10.1007/s00419-013-0776-z ↗
51. Thai, H.T., Kim, S.E.: A simple quasi-3D sinusoidal shear deformation theory for functionally graded plates. Compos. Struct. 99, 172–180 (2013). doi: 10.1016/j.compstruct.2012.11.03010.1016/j.compstruct.2012.11.030 ↗
52. Touratier, M.: An efficient standard plate theory. Int. J. Eng. Sci. 29, 901–916 (1991)10.1016/0020-7225(91)90165-Y ↗
53. Vaghefi, R., Baradaran, G.H., Koohkan, H.: Three-dimensional static analysis of thick functionally graded plates by using meshless local Petrov-Galerkin (MLPG) method. Eng. Anal. Boundary Elem. 34, 564–573 (2010). doi: 10.1016/j.enganabound.2010.01.00510.1016/j.enganabound.2010.01.005 ↗
54. Wattanasakulpong, N., Ungbhakorn, V.: Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities. Aerosp. Sci. Technol. 32, 111–120 (2014). doi: 10.1016/j.ast.2013.12.00210.1016/j.ast.2013.12.002 ↗
55. Wattanasakulpong, N., Prusty, B.G., Kelly, D.W., Hoffman, M: Free vibration analysis of layered functionally graded beams with experimental validation. Mater. Des. (1980–2015) 36 182–190 (2012). doi: 10.1016/j.matdes.2011.10.04910.1016/j.matdes.2011.10.049 ↗
56. Wu, C.P., Chen, S.J., Chiu, K.H.: Three-dimensional static behavior of functionally graded magneto-electro-elastic plates using the modified Pagano method. Mech. Res. Commun. 37, 54–60 (2010). doi: 10.1016/j.mechrescom.2009.10.00310.1016/j.mechrescom.2009.10.003 ↗
57. Xiang, S., Kang, G.: Static analysis of functionally graded plates by the various shear deformation theory. Compos. Struct. 99, 224–230 (2013). doi: 10.1016/j.compstruct.2012.11.02110.1016/j.compstruct.2012.11.021 ↗
58. Yahia, S.A., Atmane, H.A., Houari, M.S.A., Tounsi, A.: Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories. Struct. Eng. Mech. 53, 1143–1165 (2015). doi: 10.12989/sem.2015.53.6.114310.12989/sem.2015.53.6.1143 ↗
59. Zenkour, A.M.: A comprehensive analysis of functionally graded sandwich plates: part 2-buckling and free vibration. Int. J. Solids Struct. 42, 5243–5258 (2005). doi: 10.1016/j.ijsolstr.2005.02.01610.1016/j.ijsolstr.2005.02.016 ↗
60. Zenkour, A.M.: Generalized shear deformation theory for bending analysis of functionally graded plates. Appl. Math. Model. 30, 67–84 (2006). doi: 10.1016/j.apm.2005.03.00910.1016/j.apm.2005.03.009 ↗
61. Zhu, P., Liew, K.M.: Free vibration analysis of moderately thick functionally graded plates by local Kriging meshless method. Compos. Struct. 93, 2925–2944 (2011). doi: 10.1016/j.compstruct.2011.05.01110.1016/j.compstruct.2011.05.011 ↗