Application of a Two-Stage Steam Jet Injector Unit for Latent Heat Recovery of a Marine Steam Turbine Propulsion Plant

The paper presents the results of the numerical research of the steam jet injector applications for the regenerative feed water heating systems of marine steam turbine propulsion plants. The analysis shows that the use of a single injector for a single heat exchanger results in a relative increase in the thermal efficiency of the plant by 0.6–0.9%. The analysis also indicates the legitimacy of the usage of multistage feed water heating systems, which would enable the operating parameters optimization of the injectors. The obtained steam pressure up to the value of 1.8 barA allows for the heating of the feed water up to 110 °C. For higher degrees of feed water heating in the heat exchangers, it is necessary to supply heating steam of higher pressure. Therefore, the usage of two-stage steam jet injector units was considered advisable for the analyses.